TT pistol. Photo

Tokarev pistol manufactured in 1950 Photo by Paul Lokamp

TT pistol model 1933 Photo gunpics.net

The TT pistol was created by a design team led by Fedor Vasilyevich Tokarev at the design bureau of the Tula Arms Plant. The Nagan revolver did not have the necessary rate of fire, firepower and shooting efficiency. It was necessary to create personal weapons with higher combat and service-operational qualities. The then widespread Browning and Mauser pocket pistols of 7.65 mm caliber were not suitable for use in the army due to the low stopping power of the bullet, the Belgian Browning 1903 9 mm caliber did not have an external trigger and was designed for a rather low-power cartridge, the American M1911A1 was too large-sized and a heavy, rather difficult to manufacture weapon, although very effective in shooting, the Mauser C-96, beloved by many Red Army commanders and revolutionaries, was hopelessly outdated, and the German Parabellum P.08, which had excellent combat and operational qualities, was too expensive and labor-intensive to produce . In general, the reason for abandoning foreign systems was the need to re-equip the weapons industry with new production equipment and introduce new standards, which required enormous expenses that were not acceptable at that time for Soviet Russia. The new weapon for arming the command staff of the Red Army had to have a long range of actual fire, small dimensions, light weight, an open trigger and the simplest possible safety lock, as well as a beautiful appearance, but most importantly, be simple in design and adapted for cheap mass production on an outdated and primitive equipment.

A powerful 7.62 mm caliber cartridge with a muzzle velocity of 420 m/s was chosen for use in the new pistol. It was a redesigned 7.63mm Mauser cartridge, which later received the designation 7.62×25 TT. The use of this cartridge did not require re-equipment of production; in addition, there were quite a lot of a large number of 7.63 mm cartridges purchased from the Germans for Mauser C-96 pistols. The assigned tasks regarding the qualities of the pistol itself were achieved thanks to new design solutions by Tokarev, who took the Browning locking system as the basis as the simplest and most the best way suitable for use in compact weapons chambered for such a powerful cartridge, as well as the layout and design of the FN Browning model 1903 pistol. In June - July 1930, the first field tests of the F.V. pistol took place. Tokarev together with domestic designs by S.A. Prilutsky and S.A. Korovin chambered for 7.62×25, as well as foreign pistols FN Browning model 1922 and Walther PP 7.65 mm caliber, Parabellum P.08 9 mm caliber and Colt M1911A1 45 caliber. During these tests, the Tokarev pistol demonstrated excellent ballistic qualities and accuracy. When shooting at 25 meters, the dispersion radius was 7.5 cm.

Tokarev's weapon turned out to be easy to handle and operate, superior to other models in terms of weight and size characteristics, and reliable in operation during prolonged firing. A huge advantage for the Soviet arms industry of those years was the manufacturability and ease of production of this pistol. The competition committee headed by M.F. Grushetsky considered the Tokarev pistol the most acceptable and suitable for adoption, provided that the identified shortcomings were eliminated. The commission's requirements included improving shooting accuracy, easing the trigger pull, and making it safer to handle. Tokarev completed the task within several months of work. The decision on additional tests was made on December 23, 1930. In January of the same year, in Solnechnogorsk, Moscow Region, tests took place at the training ground of the Higher Rifle School “Vystrel”, which were attended by the main military leaders of the state: K.E. Voroshilov, M.N. Tukhachevsky, I. P. Uborevich, as well as many high-ranking officials. Based on the test results, the advantages of the improved Tokarev pistol over other models were noted. On February 12, 1931, the Revolutionary Military Council of the USSR ordered the first batch of 1000 pistols for comprehensive military testing. In the same year, the Tokarev pistol was adopted by the Red Army under the official designation “7.62 mm self-loading pistol arr. 1930 g" along with the 7.62×25 cartridge under the designation "7.62 mm pistol cartridge "P" mod. 1930." Unofficially, this weapon began to be called TT ( Tula Tokareva), later this name was assigned to it.

TT pistol design

The Tokarev pistol combines design features various systems: Browning bore locking pattern used in the famous M1911, FN Browning model 1903 design and 7.63mm Mauser cartridge. At the same time, the pistol has original design solutions - combining the trigger mechanism in a separate single block - the block, which, when disassembling the weapon, is freely separated from the frame for cleaning and lubrication; placement of the mainspring in the trigger, which reduced the longitudinal width of the handle; fastening the cheeks of the handle with the help of rotating bars attached to them, which simplified the disassembly of the pistol, the absence of a safety mechanism, the function of which was performed only by the safety cocking of the hammer. The automation works according to the scheme of using recoil with a short barrel stroke. Locking is carried out using a descending barrel. Two lugs located on the outer upper side of the barrel in front of the chamber fit into corresponding grooves made in the inner surface of the bolt casing. The breech of the barrel is lowered by means of an earring, hingedly connected to the barrel by the axis of the earring, and to the frame by the axis of the bolt stop. The trigger mechanism is hammer type, single action, with safety cocking. When the trigger is put on the safety cock, the bolt-casing is also blocked.

The direction of supply of the cartridge from the magazine to the chamber in the TT pistol is carried out by the guiding surfaces of the protrusions of the trigger block, which increases the reliability of chambering if the curved upper edges of the side walls of the neck of the magazine box are damaged. On the left side of the frame there is a bolt stop lever, on the right side there is a split bolt stop spring that fixes it and is used for disassembling the weapon. The magazine latch is located at the base of the trigger guard, on the left side of the frame. Sights consist of a non-adjustable front sight, made as part of the bolt-casing, and a rear sight, fixed in a groove of the " dovetail» with the possibility of making lateral amendments. A box magazine with a single-row arrangement of cartridges in the side walls has holes for visual determination of their number. These holes are staggered, seven on the right and six on the left. The tilt angle of the handle is 102°. The cheeks of the handle are plastic, with a large notch. The cheeks of early production pistols are completely grooved. In 1935, pistols with brown cheeks were produced. Later, with the exception of wooden ones, only black cheeks were made. On the cheeks of a later issue, in the center, there is a five-pointed star with a stylized inscription “USSR”. The weapon was made of carbon steel. The surfaces were treated with oxidation.

Production of the Tokarev pistol began in 1930 at the Tula Arms Factory. In 1930 - 1932 several thousand were produced, while in 1932 - 1933. a number of changes were made to the design of the pistol in order to increase the manufacturability of production: the lugs of the barrel were now made by turning, and not milled as before; the frame was made in one piece, without a removable handle cover; The disconnector and trigger rod were modified. In this form, mass production of Tokarev pistols began in 1933, and the pistol was put into service under the name “7.62-mm self-loading pistol mod. 1933." The Red Army received modern personal weapons - a self-loading pistol, created on the basis of the best design solutions, possessing fairly high combat and service-operational qualities.

However, the Nagant revolver, which was in service with the Red Army, and the Tokarev pistol, which was trouble-free in operation and accurate in shooting, at the same time having an unacceptably low rate of fire and low stopping effect of the bullet of the cartridge used, could not be completely replaced by the TT, which was produced in parallel with the “7. 62 mm Nagan revolver mod. 1895" until the end of the Second World War. Pistol production either decreased or increased in volume. In 1941, in connection with the advance of German troops towards Tula, the USSR government decided to transfer the production of Tokarev pistols to the Izhevsk Mechanical Plant. However, after the evacuation of the equipment, Tula gunsmiths were able to establish a small-scale production of pistols, repairing outdated machines and tools, as well as repair old pistols coming from the front. After the Wehrmacht advance near Moscow was stopped, production at the Tula Arms Plant was restored within a few months. Pistols produced during the war years were distinguished by poor quality of manufacturing and surface treatment, as well as wooden handles. Post-war production of Tokarev pistols was carried out at the Tula and Izhevsk factories.

The TT received its baptism of fire in 1938 - 1939. in the battles at Khalkhin Gol and Lake Khasan, and then was used during the Soviet-Finnish “Winter” War of 1939-1940. During the years of the USSR's participation in World War II, Tokarev pistols became widely used in all branches of the Red Army. IN Finnish army captured TTs were used until the end of the 1950s. They can be distinguished by a stamp with the letters “SA” in a rectangle located on the left side of the frame, above the butt plate of the handle. In the Wehrmacht, Tokarev pistols were in service as weapons of a limited standard under the designation Pistole 615 (r) and were mainly used in the rear and security units of the Wehrmacht and by the police. TT pistols, along with other examples of Soviet small arms, were used in the Russian national armies RONA, 1st RNA, Russian Corps and KONR Armed Forces operating on the side of the Third Reich, as well as in various formations of the SS Troops consisting of Slavs and Cossacks. It should be clarified here that out of approximately 1.24 million USSR citizens in Wehrmacht units from 1940 to 1945. About 400,000 Russians and 250,000 Ukrainians served and went over to the enemy’s side. After the war, in 1946, production technology was again improved. The bolt-casing of the modernized pistol has a corrugated notch, instead of alternating large and small grooves, but this year pistols with large alternating notches were also produced. Production continued until the end of 1953. Total from 1930 to 1953 About 1,740,000 pistols were produced, of which about 4,700 were 1930 model pistols. In the armed forces of the USSR, the Tokarev pistol was used until the 1970s.

During combat use Tokarev's weapons demonstrated high combat qualities. The pistol has a high bullet penetration and long range shooting, as well as high shooting accuracy over long distances, which is due to the flat flight path and high initial speed of the bullet. The weapon has a small width, with no strongly protruding parts. Placing the trigger in a separate block makes it much easier to care for the weapon and eliminates the risk of loss small parts. Ease of use is ensured by a single action trigger. Such a trigger is optimal for pistols used in real combat operations, since it has simplest principle work and devices. But shortcomings also emerged. Constant pressure of the mainspring when the trigger is set to the safety cock, leads to its gradual settlement and reduction in survivability. Weak fixation of the magazine with a latch, which leads to its spontaneous falling out. Over time, the earring wears out, which leads to delays in shooting. The possibility of the sear breaking, if it is severely worn, when the pistol falls on the trigger, which is set to the safety cock, which entails a spontaneous shot if the cartridge is in the chamber. The small tilt angle of the handle does not ensure the accuracy of “instinctive” aiming when shooting offhand. Due to the reduced quality of steel, wartime weapons could only withstand 700 - 800 rounds without failure.

To ensure reliable operation of the weapon, it is necessary to store the pistol with the trigger pulled and without a cartridge in the chamber, replace the magazine latch spring with a stronger one, and when disassembling, before separating the bolt stop, you must first separate the barrel guide bushing and thereby unload the return spring, which prolongs its service life . The most reliable and having best quality pistols manufactured at the Izhevsk Mechanical Plant in the period from 1947 to 1953 are considered to be manufactured. This circumstance is explained by the well-established production technology and a significant reduction in the production plan. High quality also possessed TTs produced at the Tula Arms Plant before the USSR entered the Second World War. High-quality samples can withstand up to 10,000 shots. Despite the adoption of the Makarov pistol into service in 1951, the TT was in service Soviet army until the early 1960s, and in law enforcement agencies- until the mid-1970s. Currently, the TT is used by the police, VOKhR, hunting supervision, fisheries supervision and other organizations, as well as by operatives of special forces groups.

The main advantages of the TT pistol and the reasons for its popularity

The Tokarev pistol and its modifications after the Second World War received widespread worldwide. Their production was established in Poland, Hungary, Czechoslovakia, Yugoslavia, Romania, China, North Korea, Vietnam and Iraq. Pistols designed by Tokarev were in service in more than 35 countries around the world. These weapons have been used in every major and minor armed conflict throughout the 20th century and continue to be used in modern battlefields. The wide popularity of the TT is a consequence of the combination of its low cost, high combat qualities, as well as ease of use and maintenance. Opinion about the employee’s TT special unit Ministry of Internal Affairs of the Russian Federation with extensive combat experience: “A lot has been said about him, but very little can be added. More suitable for military applications when given in combat readiness. For its relatively small dimensions, one of powerful pistols in the world. And it’s much nicer to the touch, for example, PYa and all sorts of Glocks. Completely unsuitable for urban shootings and self-defense. The bullet’s high penetrating power and lack of self-cocking can lead to prison (shooting right through and into a random passerby) or to the cemetery (you have to have time to cock the trigger).” KardeN

The main and most attractive for both special forces soldiers and shooting enthusiasts and weapon collectors is the powerful 7.62×25 TT cartridge, originally created for the C-96 “pistol-carbine” and having a very high penetration effect for a pistol cartridge bullets and good ballistic qualities - the bullet has a flat flight path, making it easier to aim when shooting at long distances. When using cartridges with highly effective expansion bullets, such as Wolf Gold JHP, stopping power is significantly increased. It is the shooting of these cartridges that is the highlight of the TT, along with the ascetic design and simplicity. The wide popularity of 9mm Parabellum variants is explained by the smaller distribution of 7.62x25 TT cartridges and their higher cost than 9 mm cartridges. Currently, the TT pistol is consistently in demand among military weapon shooting enthusiasts in the USA and Europe. The largest producer is China, leading large-scale exports. But the disadvantage of Chinese weapons is their lower quality compared to European ones. TTs produced in Serbia are not limited to using only 7.62x25 TT and 9mm Parabellum cartridges, but are also produced for other popular pistol cartridges.

Analogues and their differences

One of the best pistols based on the TT design is certainly the M57, created in Yugoslavia at the Zastava company and currently produced by Zastava Arms (Zastava oružje) for export to various countries around the world, including Western Europe and the United States of America. Compared to the Tokarev pistol, the M57 design has a number of changes that significantly increase the ergonomics and safety of handling the weapon. Most important change There is now a safety catch that, when turned on, blocks the trigger mechanism and the bolt-casing. Its large-sized lever is very easy to use and makes it easy to bring the weapon into full combat readiness even when drawing it out. In addition, the handle was lengthened, which increased the magazine capacity by one cartridge, and the magazine latch was enlarged. In 1990 at international market weapons, the Hungarian T-58 pistol was released, a modernized version of the Tokagypt 58. This weapon has ergonomic grip cheeks, like the P.38, and a safety lever on the left side of the frame. The pistol uses 9mm Parabellum and 7.62x25 TT cartridges. The kit includes 9 mm and 7.62 mm barrels and corresponding magazines. The T-58 is the most advanced version of the TT. The weapon itself, created by Fedor Tokarev, still has big potential modernization.

Pistol arr. 1933(TT, Tula, Tokareva, GRAU Index - 56-A-132) - the first army self-loading pistol of the USSR, developed in 1930 by Soviet designer Fedor Vasilyevich Tokarev.

TACTICAL AND TECHNICAL CHARACTERISTICS TOKAREV PISTOL REV. 1933
Manufacturer:	Tula Arms Factory
Cartridge:	7.62×25 mm TT
Caliber:	7.62 mm
Weight without cartridges:	0.854 kg
Weight with cartridges:	0.94 kg
Length:	195 mm
Barrel length:	116 mm
Number of rifling in the barrel:	4
Height:	130 mm
Trigger mechanism (trigger):	Trigger, single action
Operating principle:	Barrel recoil during short stroke
Fuse:	Trigger safety cock
Aim:	Front sight and fixed rear sight with sighting slot
Effective range:	50 m
Initial bullet speed:	450 m/s
Type of ammunition:	Detachable magazine
Number of cartridges:	8
Years of production:	1930–1955

History of creation and production

The TT pistol was developed for the 1929 competition for a new army pistol, announced with the aim of replacing the Nagan revolver and several models of revolvers and pistols foreign production, which were in service with the Red Army by the mid-1920s. The German 7.63×25 mm Mauser cartridge was adopted as a standard cartridge, which was purchased in significant quantities for the Mauser S-96 pistols in service.

The competition commission, headed by M. F. Grushetsky, considered the pistol designed by F. V. Tokarev the most suitable for adoption, provided that the identified shortcomings were eliminated. The commission's requirements included improving shooting accuracy, easing the trigger pull, and making it safer to handle. After several months of work, the shortcomings were eliminated. On December 23, 1930, a decision was made to carry out additional tests.

Based on the test results, the TT pistol, created by a design team led by F.V. Tokarev at the design bureau of the Tula Arms Plant, won the competition. On February 12, 1931, the Revolutionary Military Council of the USSR ordered the first batch of 1000 pistols for comprehensive military testing. In the same year, the Tokarev pistol was put into service under the official designation “7.62 mm self-loading pistol mod. 1930" together with the 7.62x25 cartridge.

The pistol, called TT (Tula Tokarev) was simple and technologically advanced in production and operation.

Pistol TT arr. 1933

At the same time, the USSR bought a license for the production of the cartridge from the German company Mauser and began production under the designation “7.62 mm pistol cartridge “P” mod. 1930" . Several thousand copies were produced in 1930-1932. In order to improve the manufacturability of production, in 1932-1933. the weapon was modernized: the barrel lugs were not milled, but were turned; the frame was made in one piece, without a removable handle cover; The disconnector and trigger rod were modified. At the beginning of 1934

new gun

was put into service under the name “7.62-mm self-loading pistol mod. 1933."

In November-December 1941, equipment for the production of TTs was moved to Izhevsk. During 1942, Izhevsk Machine-Building Plant No. 74 managed to produce 161,485 Tokarev pistols. Also in 1942, Izhevsk Plant No. 74 produced a small batch of Tokarev pistol with a two-row magazine for 15 rounds. The thickness of the handle was 42 mm (versus 30.5 mm for the standard TT). The magazine latch was moved to the base of the handle.

In 1947, the TT was again modified in order to reduce its cost: large vertical grooves, alternating with small grooves on the bolt casing for convenient retraction of the bolt, were replaced with small grooves (corrugation).

Options and modifications:

According to some experts, when developing the design of the pistol, it was initially planned to completely copy the design of a modified Browning pistol with a removable trigger mechanism. However, during the work process, the designers abandoned complete copying due to the lack of a technological base for producing a complete copy of the original. It was necessary to reduce production costs by simplifying the design.

At the same time, the pistol has original design solutions aimed at ease of handling of the weapon: combining the trigger mechanism in a separate single block block, which, when disassembling the weapon, is freely separated from the frame for cleaning and lubrication; placement of the mainspring in the trigger, which reduced the longitudinal width of the handle; fastening the cheeks of the handle with the help of rotating bars attached to them, which simplified the disassembly of the pistol, the absence of a safety mechanism - its function was performed by the safety cocking of the hammer.

TT pistol, incomplete disassembly.

Browning's short-stroke bore locking design with a swinging pin, the automatic operation system, as well as the trigger, borrowed from the Colt M1911 pistol, were modified to simplify production.

Single action trigger. The impact mechanism is made as a single unit, which simplifies factory assembly. (Several years later, Swiss gunsmith Charles Petter used the same arrangement in the French Model 1935 pistol).

The pistol does not have a safety as a separate part; its functions are performed by the safety cocking of the hammer. To set the trigger to the safety cock, you need to pull the trigger back a little. After this, the trigger and bolt will be locked, and the trigger will not touch the firing pin. This eliminates the possibility of a shot if the gun is dropped or the trigger head is accidentally hit. To remove the hammer from the safety cock, you need to cock the hammer. To put the cocked hammer on the safety cock, it must first be released by holding it and pressing the trigger. And then you need to pull the trigger back a little.

Carrying a pistol with a cartridge in the chamber with the trigger pulled is not recommended and does not make sense, since in order to fire a shot, the trigger must be cocked in the same way as a trigger set on the safety cock.

TT pistol in a holster.

On the left side of the frame there is a shutter stop lever. When the magazine is used up, the bolt is delayed in the rear position. To remove the shutter from the delay, you need to lower the slide stop lever.

The magazine holds 8 rounds. The magazine release button is located on the left side of the grip, at the base of the trigger guard, similar to the Colt M1911.

When shooting at 50 m, hits in each of 10 series of 10 shots are placed in a circle with a radius of 150 mm.

Sights consist of a front sight, integral with the bolt, and a rear sight, pressed into a dovetail groove in the rear of the bolt. The cheeks of the handle were made of bakelite or (during the war) of wood (walnut).

Advantages and disadvantages

The TT pistol is distinguished by its simplicity of design and, therefore, low production costs and ease of maintenance.

A very powerful cartridge, atypical for pistols, provides unusually high penetrating power and muzzle energy of about 500 J. The pistol has a short, light trigger and provides significant shooting accuracy; an experienced shooter is able to hit a target at distances of more than 50 meters. The pistol is flat and quite compact, which is convenient for concealed carry.

However, during operation, shortcomings also appeared.

Before the Great Patriotic War, the military put forward a requirement that a pistol could be fired through the embrasures of a tank. TT did not satisfy this condition. Many experts consider this requirement absurd. However, nothing prevented the Germans from making such a requirement for their weapons: Luger P08, Walther P38 and even MP 38/40 fully satisfied it.

Without a safety lock, the TT was placed in a safe position by the so-called half-cocked hammer, which made it difficult to bring the pistol into the firing position. There were involuntary cases of self-inflicted gunfire, one of which was described by Yuri Nikulin in the book “Almost Seriously.” Ultimately, the Charter directly prohibited carrying a pistol with a cartridge in the chamber, which further increased the time it took to bring the pistol into combat-ready condition.

Another disadvantage is the poor fixation of the magazine, which leads to its spontaneous falling out.

The TT pistol is distinguished by its flat trajectory and high penetrating effect of a pointed bullet, which is capable of piercing an army helmet or light body armor. The penetrating effect of a TT bullet exceeds the penetrating effect of a 9x19 mm cartridge bullet (a “7.62 P” bullet with a lead core, after being fired from a TT pistol, penetrates class I body armor, but does not penetrate class II body armor even when shot at point-blank range. At the same time, , the stopping effect of a 7.62 mm TT bullet is inferior to that of a 9x19 mm cartridge bullet.

Operation and combat use

During the period 1930-1945:

Video

Shooting from a TT, handling weapons, etc.:

TT pistol.

External differences and design features of Tokarev pistols of the 1930 model and the 1933 model

Since the development of the TT pistol, two main modifications have been mass-produced. First of all this 7.62 mm Tokarev pistol model 1930, which was produced in several small series of a thousand units for large-scale testing among the troops, as well as 7.62 mm Tokarev pistol model 1933, which after some modifications was launched into large-scale production.

The first significant difference in the design of the TT-30 pistol from the TT-33 pistol is the presence of a removable cover on the TT 1930 pistol, on the back of the handle, which ensures easy assembly of the trigger.

In the TT 1933 pistol it was removed, making the frame solid, and the weapon more technologically advanced and cheaper.

Second external difference between the TT-1930 pistol and the TT-1933, which also allows you to identify the 1930 and 1933 models, this different position triggers relative to the aiming bar.

This is explained by the fact that one of the main design differences is the modification of the block with a trigger mechanism (USM) in the 1933 model.

The visual difference of the trigger block itself of the 1930 model is a narrow milled groove for fixing in the pistol frame. The trigger rod of this model interacts with the sear using the protrusion of the rear trigger rod bridge. The disconnector also interacts with the trigger rod through this protrusion.

Unlike the 1930 model, the trigger block of the TT pistol of the 1933 model has a larger longitudinal milled groove. The design of the trigger has also been changed. To simplify manufacturing, the trigger rod is made without a protrusion. The thrust spring acts on the protrusion of the rear jumper of the trigger rod, which has a beveled wall. The shape of the trigger spring has also been simplified. It is attached to the back wall of the handle using a pin. The sear in the new model interacts with the trigger rod not through a protrusion, but with the help of a bar hook made on the lower arm of the rear jumper of the trigger rod. The disconnector acts directly on the trigger rod, for which it is made longer.

The design of the trigger block also changed slightly depending on the year of manufacture of the weapon. Some early design TT 1930 pads already have a larger longitudinal milled groove.

In the photo in the top row, from left to right, the USM pads are shown:

Tula 1934, narrow milled groove of the block, early version of the trigger (noticeable by the disconnector and sear)

Tula 1934, wide milled groove of the block, early version of USM

Tula 1935, wide milled groove of the block, early version of USM

The photo in the bottom row shows USM blocks that have a wide milled groove of the block, a later version of the USM design. From left to right: Tula 1938, Izhevsk 1943, Izhevsk 1952.

The photo in the top row from left to right shows the USM pads:

TT-30 1934, narrow milled groove of the block, early version of USM

TT-30 1934, wide milled groove of the block, early version of USM

in the bottom row is a TT-33, 1938, a wide milled groove of the block, a later version of the USM design.

The TT pistol of the 1930 model and the TT pistol of the 1933 model were also equipped with barrels various designs. The Model 1930 barrel is a cylinder with a thickened breech and a boss for attaching an earring. In the middle part of the barrel there are two semi-circular grooves for engagement with the bolt protrusions when locking.

In order to simplify production in pistol barrels mod. 1933, the grooves for connecting to the bolt are made using continuous annular grooves.

TT models of the 1930 model were marked with a four-digit number, the first two of which indicated the year of manufacture, for example 3313.

The TT marking of the 1933 model included a number with the first two letters, the manufacturer’s symbol (for example, an asterisk for Tula) and the year of manufacture.
For example, AZh535 * 1941.

External differences and design features of post-war Tokarev pistols

Post-war combat models were visually distinguished by a smaller notch on the bolt casing, and predominantly had a mod. 1933.

Post-war TT markings also included a number with the first two letters, the manufacturer's symbol and the year of manufacture.

For example, YaF3296 1952.

It is very convenient to illustrate the features of markings on TT pistols of various years of production using diagrams, the author of which is an expert on the history of weapons, known online under the nickname “Walther P38” ". We cannot confirm the reliability of these illustrations by referring to any literature, but encountering other works of this person, knowing his careful approach to searching for information, allows us to be sure that the information was collected by the author for more than one month, and possibly more than one year , comparing photographs obtained from various sources with scattered reference data.

These diagrams illustrate the location of technological marks and markings on the TT pistol.

Differences in markings on parts of the TT pistol from 1933 to 1939.

Considering the technical characteristics of the TT pistol, it is worth noting that the weight is 910 g, in turn, the length is 116 mm.

The clip is designed for 8 bullets, and the length of the aiming line can be considered within 156 mm. 50 m - sight range. This pistol is zeroed at a distance of 25 m.

The bullet speed is 420 m/s. The structure of the mechanism includes 45 main parts. The pistol operates using recoil energy with a short barrel stroke.

The locking function is carried out by connecting the protrusions of the shutter casing with certain figures on the trunk. Next, the sliding earring lowers the barrel to the level of the breech, based on this, the barrel and bolt are separated. In TT, all parts of the impact mechanism are combined into one common block.

Expert Note: In order to partially disassemble the pistol, no tools are needed, since it can be disassembled very easily.

History of creation

During the formation of the Red Army in the early 20s, the problem of reconstructing weapons in general and private weapons used in close combat arose.

Soviet developers had to develop a pistol that would be suitable for firing 7.63 mm caliber bullets from the Mauser model 1897.

Designers such as Tokarev, Korovin and Prilyutsky participated in the competition held by the government.

Tokarev won by a large margin over his players. Since the first production of the TT was launched in Tula, it was therefore named Tula Tokarev.

Note: There is no safety in the TT as a separate element of the body; the pistol is secured by setting the trigger to safety.

According to the technical characteristics, it was no match for the military pistols of those times, and even surpassed them in a number of characteristic features.

For example, you can consider Western shooting standards at a distance of 50 m, at which the maximum dispersion allowed is 35.5 cm, although when shooting from a TT, the dispersion distance is 15 cm.

Along with the pistol, 7.62 mm “P” type cartridges (7.62x25 mm), which were made on the basis of the well-known powerful 7.63 mm Mauser cartridge, were also used. However, later various cartridges were introduced, for example with armor-piercing and tracer bullets.

Flaws

The TT pistol is very easy to maintain and has a fairly low cost. Designer Tokarev achieved this effect through a very simple weapon design.

Due to the significant kinetic force of the bullet (just under 500 J), this pistol has very high penetration power, as well as fairly effective accuracy for this type of weapon.

However, during operation some shortcomings also emerged. A serious drawback was the lack of an ordinary fuse. Many accidents have been recorded that occurred due to the lack of a fuse.

When the weapon with a cartridge in the magazine fell, a shot was fired. The archive even had a separate section with accidents, in order to distinguish them from real crimes falsified as accidents.

Also a very important drawback is the insufficiently strong fixation of the magazine, which leads the shooter to a disarmed state during combat operations.

Back in 1931-32. Several thousand copies were manufactured and tested in field tests, which revealed some shortcomings, one of which was the clip falling out during use.

Designer Tokarev carried out some reconstruction of the weapon and in 1933 introduced the updated TT-33, which solved the problem with the magazine falling out.

Already in 1934, this model was put into service. Including the period of the Great Patriotic War, the TT was manufactured simultaneously with.

After a short time, the TT was completely eliminated from production by Nagan. It should be noted that on June 22, 1941. There were approximately 600 thousand TT-33s in service with the Red Army. However, during the war production increased even more.

Analogues

Usually, when producing a decent, high-quality product, the manufacturer is accused of plagiarism. This is what happened with the Tokarev pistol. The TT, since ancient times, has often been compared to a pistol

Browning, which was produced in 1903. And in the United States, the TT is often called the Browning-Tokarev.

Maybe it’s not for nothing that people say so and Tokarev based his development on this Belgian pistol, because if you compare the TT and Browning, they are not much different.

Of course, Tokarev modified it and made the weapon a class higher. I would like to add that the Browning prototype that Tokarev chose had been in production for 37 years and was one of the most popular pistols in Russia and beyond. In Russia, Browning was used to arm the gendarmerie corps.

Look detailed video about TT and its technical characteristics:

The city of Tula is famous throughout the world not only for its delicious gingerbread cookies and samovars, but also known for its arms factory, which produces legendary rifles, pistols and revolvers. It is one such legendary firearm that will be discussed in this article. The focus is on the TT pistol - technical characteristics, design and principle of operation, modernization and all kinds of modifications.

Historical reference

The development of the pistol began in 1929 by weapons designer Tokarev at the Tula plant. Hence the name TT - Tula Tokarev. The development of new pistols was initiated by a tender launched throughout Russia, the purpose of which was to replace foreign weapons in the army with domestic ones and reduce the cost of production. Along with the Tokarev pistol there were weapons from Prilutsky, Korovin, Makarov and many other fairly famous designers. But in 1930, success came precisely to the design bureau, headed by

Tests of the TT pistol at the training ground showed excellent destructive power, high firing range and good accuracy. The weapon did not have a single malfunction or misfire when firing quickly after immersion in water and sand. There were flaws in the aiming system, security and mobility. Due to its enormous weight, the TT pistol, the technical characteristics of which completely satisfied all members of the jury, was sent for revision, which lasted almost a year. But as a result of modernization, the weapon had no equal among pistols not only domestic, but also foreign-made.

Technical characteristics of the combat unit

The TT pistol - a combat copy - of 1933 differs from the latest modification of 1947 only in minor modifications in terms of ease of use and cost reduction, and their characteristics are almost the same.

The weight of the pistol when loaded is 0.9 kg.
The operating principle is based on short-stroke recoil with a skewed bolt.
The magazine holds 8 rounds, and the 7.62x25 mm TT cartridge itself was borrowed from Mauser (7.63x25) with a “three-line” adjustment. In museums you can find a modification of the 1942 TT pistol with a two-row magazine designed for 15 rounds.
Sighting range 50 meters, with a maximum bullet range of 1650 m. Open sight with a non-adjustable rail.
The initial bullet speed is 430-455 meters per second.
There is no fuse in the TT as an independent unit. The pistol is set to safety by retracting the trigger to half its stroke.

TT pistol design and operating principle

Many foreigners who have little knowledge of weapons like to say that the design of the Tula Tokarev pistol was copied from a modified Browning. One complete disassembly of the TT pistol will put an end to this issue. All its mechanisms have their own separate units, which can be disconnected from the frame in case of incomplete disassembly and lubricated. If there is a need to completely disassemble the weapon, it is very convenient to disassemble and reassemble each unit separately.

When you press the trigger, pressure occurs on the protrusion of the sear, which turns and releases the trigger. Under the action of a spring, the trigger hits the firing pin, firing a shot. Under the influence of powder gases, the cartridge case moves in the opposite direction of the shot, causing the bolt to roll back until it meets a reflector, due to which it is ejected from the barrel. The bolt, evacuated by the sleeve, pulls the barrel behind it, keeping it locked in the grooves. When the gas pressure drops to a minimum value, the barrel hits the pistol frame and stops, disengaging the bolt-barrel system. Continuing to move backward, the bolt disengages the sear-trigger system, cocking the hammer. The breech of the barrel, open for a moment, accepts a new cartridge, which is immediately fixed by the bolt, which returns after cocking the hammer, by inertia.

Foreign-made modifications

The TT pistol, whose technical characteristics were unmatched among all competitors in the mid-20th century, quickly attracted the attention of many countries that had difficulties developing their own modifications. Naturally, all states keeping pace with the USSR to build communism were provided with Soviet Union all necessary technologies for production legendary weapons Tula Tokarev.

Friendly mastered the production of Soviet TT in the 50s of the 20th century under its own brand “TT-58”.
An entire line was transferred to China for the mass production of legendary weapons. At the end of the 60s, having orientated themselves on the global arms market, the Chinese launched the production of their own M20 pistol chambered for 9x19 mm.

Pakistan, Iraq, Yugoslavia, Vietnam, Romania and Egypt were also not left without support. By supporting the USSR, they received not only a huge number of combat units, but along with the supply of equipment for the production of TT pistols, they were provided with highly qualified technical specialists in the field of weapons creation.

Serious argument

In countries post-Soviet space The TT combat pistol, the technical characteristics of which do not meet many international parameters, has been withdrawn from service. Judging by numerous reviews from experts, there are few actual reasons for switching to a smaller caliber.

Bullets with a caliber of more than 5.45 mm cause less harm to the body, piercing through it.
Reducing the size and weight of the cartridge allows the clip to accommodate more cartridges.
It is not cheap to produce a cartridge case for the TT caliber, and it is much more convenient to put one cartridge on the conveyor, but for all modifications of Russian pistols.

However, it is still too early to write off the 7.62 mm TT. Weapons have taken root in all private and government security structures, including bank collections. You can find many reviews from happy owners who use this legendary firearm in service. And many security guards who retired acquired a copy of the 1930 model combat TT. This is Love.

Traumatic weapon

The great popularity of the legendary firearm has led to the fact that the TT pistol, the production price of which still remains very low, has found a second life. IN beginning of XXI century, on the verge of popularity traumatic weapons, many factories became interested in TT pistols gathering dust in military warehouses, which had been stored since the end of the Great Patriotic War. Only the barrel, breech and cartridge underwent changes. As a result, traumatic weapons appeared on the markets of the post-Soviet space at a very low price. Following the requirements of the Weapons Law, all traumatic pistols exclude the possibility of converting it into a combat unit.

VPO-501 “Leader” is a traumatic pistol that uses a cartridge case instead of a barrel. The TT caliber was changed to 10x32 mm.
TTR is a nine-millimeter traumatic weapon produced by the Sobr company in the city of Kharkov.
“Izhmekh” presented its creation in the form of a traumatic pistol under a 9 mm bullet, called MP-81.
“Tula Tokarev traumatic” has a modified TT cartridge 10x28 mm and is produced by the Degtyarev plant.

Permitted pneumatics

Many world giants are trying to reproduce the legendary firearms. It was thanks to them that a TT pneumatic pistol from very well-known manufacturers appeared on the market.

IZH MP-656 cannot even be called a copy, because it is a real combat pistol of the 1947 model, with a modified design that does not allow it to be put into service again. Even though the initial speed of a bullet is 100 meters per second, a combat pistol in your hands is much more attractive than plastic toys.
A Chinese-made miracle called Smersh H51 may interest the buyer due to its similarity to the original. Its only drawback is the stationary shutter during shooting.
It showed good performance during shooting. Only the strange grip linings raise doubts, they are very huge.
But the Gletcher TT, made of silumin, was immediately received negatively by customers. In specialized sources of information you can find ridicule of an American-made pistol, the trigger and safety of which have been replaced with a button. Then it becomes clear why Gletcher TT has negative reviews.

Legendary weapons in sports

Starting from 2011, the TT-S signal pistol was produced on the basis of the VPO-501 “Leader” traumatic weapon. Its difference from combat pistol it was only in the absence of a barrel, instead of which a simulator was installed. Welded from two misaligned tubes with cuts on the side, the homemade barrel was not designed to fire live ammunition, but the shot was very loud. To fire a shot, the Zhevelo capsule is used, well known and very popular among Russian hunters. Interestingly, the pistol has a cartridge supply system. Special brass sleeves accommodate plastic cartridges with Zhevelo, and then, assembled into a cartridge, this entire structure is placed in a clip. It’s a little tricky, but it’s still better to shoot in semi-automatic mode than to have to remove the cartridge case from the breech of the barrel after each shot and install new ammunition.

Excitement among collectors

In 2013 Russian government A law was passed prohibiting the conversion of military weapons. If with a traumatic pistol, for which there is great demand, the issue was resolved by manufacturing it from foreign-made components available on the market, then the TT signal pistol simply ceased to be produced. Because of this law, there was a stir on the world stage among all weapon collectors. Naturally, the price of converted legendary firearms went up. Over the past few years, you can see the dynamics of demand for a TT starting pistol, the price of which per unit is about 20 thousand rubles, despite the fact that the cost of any other pistol does not exceed ten thousand rubles. One conclusion emerges - from year to year the need to replenish the collection with a TT pistol will grow along with its price, accordingly, the purchase of a signal TT will be an excellent investment for the average Russian. The repeal of the law could ruin the picture.

Little oddities around the legend

As you know, any weapon that has acquired world fame and is in demand among buyers, receives new life in the form of models, pneumatics and toys for recreational shooting. If you look at the market, not a single manufacturer has released the legendary TT chambered for Flaubert. It’s a pity, 4mm pistols are in great demand in Russia, and it could add to more than one gun lover’s collection.

It is unclear the attitude of gun connoisseurs towards copies of the 1930 model TT pistol. After all, logically, this is the same thing from one of the country’s military warehouses. A barrel is cut into it and a huge pin is sealed. The striking part of the trigger is also cut off, a tooth is missing in the ejector and the magazine is damaged. But the kit comes with an excellent leather holster. Not original, but looks decent. And yet, collectors bypass the copy, preferring shooting copies.

Weapon Upgrades

Like any product from the Izhmekh plant, the TT pistol, a pneumatic version with the IZH MP-656 modification, can be improved. The gas system and firing mechanism cannot be changed. You can fine-tune all the elements in the gun. Replace something, sharpen it, saw it, but you don’t need to count on a bullet speed of more than 120 meters per second. External specialists are subject to change. Films and TV series of the 90s of the last century firmly planted information in the heads of the male population of the country that best weapon in countries former USSR- This is a TT pistol with a silencer. The miracle pistol, which was repeatedly captured on camera, will forever be remembered by future shooters. And after a while, when the time comes to acquire a legendary weapon, the new owner upgrades his toy by screwing a muffler onto the end of the barrel.

Weapon accessories

Owners of a legendary weapon or its copy may find a TT holster useful. There are several ways to find a worthy copy. In any case, it is up to the buyer to decide whether he needs a holster or whether the gun does not need it.

Buying a ready-made holster in a store. The easiest way. I came, I saw, I tried on, I bought.
Tailoring products to order. Although such a solution will cost more than purchasing it in a store, the holster will be much more comfortable to wear than a consumer product.
Recently, the “black market” of accessories for military weapons has been gaining momentum. In addition, at many online auctions you can find expensive lots offering to purchase a holster for the legendary TT of the 1930 model.

Finally

Before purchasing a weapon, any buyer needs to know that there is a law “On Weapons”, which sets out the rules that classify weapons and determine the right to purchase, store and carry them.

All pneumatic gas pistols with a shot power of less than 7.5 Joules (the legendary TT is included in this list) do not require any permits or documents.
All signal weapons with a caliber of less than 6 mm (this also applies to TT, because it uses 4.5 mm Zhevelo) do not require a license or permits.
All traumatic pistols using the energy of powder gases with a caliber of more than 4 mm (including TT, the caliber will be more than 7.62 mm) require permits for purchase, storage and carrying.

It doesn’t matter which manufacturer and modification the buyer will give their preference to in the store. It is important that the future owner of the legendary weapon knows and honors its history.