Title page sample message. How to design the title page of an essay

Every college or technical school student encounters completing an essay during their studies. This work is a detailed presentation of material from scientific sources on a given topic. It is noteworthy that the more of these sources are used during the research process, the better the report will be.

But the quality of such a document is assessed not only by the completeness of the material presented and compliance with the topic given by the teacher, but also by other parameters - the uniqueness of the text, the achievement of set goals and objectives, correct formatting taking into account all the requirements, as well as other parameters.

In this article we will talk about writing one of the sections of the report - title page– in accordance with all accepted requirements (or according to GOST).

If you encounter difficulties with writing the essay itself, contact the portal specialists who provide services for writing essays and term papers.

Correctly designed title card

The title page is the first page of any work, because it is what the reviewer sees first. This is why it is so important to write this part work correctly.

This section of work should:

be written without errors;
include all necessary information;
be carried out in accordance with GOST.

So, the title page is part of the abstract document, so it must be written without spelling errors. But what should you include in it?

Any first page of research should contain information about:

educational institution where the author studies;
the department where the report is being carried out;
type of work and its topic;
author and checker, as well as reviewer;
city and year of implementation.

General design requirements

This section must be written in black Times New Roman text. Mostly, font size 14 is used, but in some cases, which will be discussed later, font size is 18. This page is not numbered, but is taken into account in the overall numbering.

Let's look at each of the title elements in more detail.

Information about the educational institution

In this case, you must indicate the full name of the college or technical school - the data is located at the top of the page. When performing this step, a standard font size is used and it is allowed to be written in capital letters (but not required). The name of the college should be centered.

The department where scientific work is written

The information is located under the name of the college or technical school, written in a standard font and separated from the name of the educational organization by a line. Department data is aligned “centered.”

Type of work and its topic

This item is located in the middle of the sheet. The center alignment is also applied to it, but the font size in this case should be 18. The type of report and its topic are written in bold.

Information about the author, checker and reviewer

Please note that there may not be a reviewer - this is not necessary for works written in secondary educational institutions.

In this paragraph you need to indicate the name of the student, his group and course, as well as the name and position of the inspector. If there is a reviewer, indicate his name and position. The text of this item should be aligned “to the right edge”.

Year and city

The year of execution must be indicated here. scientific research and the city in which the secondary school is located. The data must be centered.

Indentations

Indentations are also important point when registering a title according to GOST. The space on the right should be 1.5 centimeters, and the rest - 2.

Abstract title page - where to find a good example?

In order to complete the first page of the report correctly, many students try to find a good ready-made form. You can download a sample of the correct execution of the title on the Internet, but be sure to check it for compliance with GOST before filling it out. It is not recommended to use the title cards of classmates as examples - this way, you can copy a mistake without even noticing it.

Among other things, it can be downloaded on our portal in a free format (see the first section).

This article examined in detail the title page for a college essay and all the issues related to its writing and design: what needs to be included in the title, how to format it correctly, and where to find a high-quality sample that will help speed up the process of completing it. After reading this article, you will be able to write a really good title for your work.

The first page of the document has its own unique design, which every student must adhere to. After all, the title page of the abstract is the face of all the work done and it creates the first impression (negative or positive) on the examiner. If the first page is formatted incorrectly, then the reviewer, without even reading the text, will send the document for revision.

The title page of the abstract is drawn up according to two main state standards:

GOST 7.32-2001 – “Report on research work”. This applies to research work, which is an abstract. This section describes everything well necessary requirements and students should adhere to them when designing the main page of the work. That is, what exactly should be on the title.
GOST 2.105-95 - as a rule, they say ESKD, but the full document is called: “ Unified system design documentation". This state standard is valid not only in Russia, but also in Belarus, Kazakhstan, and Ukraine. Here are indicated general requirements to any text documents. That is, the student will read what the title page format should be, how to write the name of the university, student and teacher information, etc.

Teachers at some universities do not focus on GOST standards, but create guidelines based on GOST standards, which specify the requirements for the entire abstract, including the first page of the abstract.

Still, according to GOSTs it is easier to prepare documents, since even if students did something incorrectly according to the manual, the teacher will not be able to object, since the student adhered to state standards.

Rules for the design of the title page

Despite the fact that university teachers create manuals with their own requirements, there are certain rules, which must be adhered to in any case. Before creating the title page of the abstract, you need to set the margin sizes: right - at least 1.5 cm, left - 3 cm, and top and bottom 2 cm, respectively.

However, it is better to learn these nuances at the department, since the teacher can change the requirements and deviate from state standards.

The title page of the main page of the document for each student should contain the following data:

Country name (not always);
full or abbreviated name of the department. The reviewer should be consulted about this;
name of the discipline;
topic of scientific work;
data of the student (the author who wrote the work). All data must be indicated in full, that is, full name, course or group number;
author's training form. A student can study full-time, part-time or evening;
reviewer details, i.e. position (required) and full last name, first name, patronymic;
the city where the student studies;
year of document release.

You should also remember that the abstract must be numbered from the first page, but the page number is not indicated on the title page.

It is worth noting that not a single GOST regulates the font, that is, the type and size are not specified. As a rule, teachers themselves say which font to use, usually Times New Roman, font size 14. Therefore, before you start writing your work, you need to consult your reviewer, who will be accepting the work, about this.

Procedure for preparing the title page of an abstract

Don't know how to format the title page of your essay? If the teacher has not indicated his requirements, then the student can independently draw up the document according to GOST.

To begin with, you can conditionally divide the A4 sheet into 4 parts. These are the top, center, right and bottom, and in each of them adhere to certain requirements.

In the first upper part it is written in capital letters in the center: MINISTRY OF EDUCATION AND SCIENCE OF THE RF. On the next line is written the name of the university and below the name of the department in quotation marks. We present an example for clarity:

The second part is located in the center of the A4 sheet. Here the word “ABSTRACT” is written only in capital letters, and after it the subject and topic of the scientific work is indicated. For example:

The third block should be aligned to the right, where the data of the students (group, full name) and the inspector (position and full name) are written. The position of the teacher must be indicated:

And the last, fourth block, although small, is no less important. It is placed at the very bottom of the page and must be centered. Here you can indicate the city in which the university is located and the year the scientific work was published. It is worth remembering: if the essay is due at the end of December, then you need to indicate the next year. The example shows that only the name of the city and the year are written. It is very important to note that the period is not placed anywhere.

Of course, title pages often differ from each other. It all depends on the specific university and its requirements. Some teachers ask that the design of the title page of the essay comply with all GOST standards, while others want to see work written exclusively according to the manual.

The title page of an essay is completed quickly and easily if the student knows all the necessary rules. Here the requirements are minimal, but it is very important to correctly indicate the details of not only the university or department, but also the teacher.

The article looked at how to correctly format the title page of an abstract in accordance with all GOST standards. When writing a paper, it is very important to consider the design of the first page. However, we should not forget that universities often deviate at least a little from GOST, so it is better to still consult with your reviewer and then start writing an essay.

How to format the title page of an essay correctly? updated: February 15, 2019 by: Scientific Articles.Ru

So, the first thing teachers pay attention to is indentation. Since the finished report is stitched on the right side, you need to indent 3 cm here. An indent of 1 cm is set on the left, and 2 cm at the top and bottom.

There are no specific requirements for font in GOST, but, as a rule, all data is written in Times New Roman 14 point font. An exception may be in the upper block. We'll talk about this below.

Some teachers themselves sometimes present their own rules that should be followed.

Sometimes the supervisor asks the title of the abstract to be underlined or italicized. If the teacher has not established such requirements, then the usual bold font is used.

To know how to make a title page for a report, you need to familiarize yourself with GOST 7.32-2001. In it you will find not only rules, but also examples. This GOST is called “Report on Research Work” (R&D).

Structure of the report title page

As a rule, the title page of the report is the first page, where all the data of the university (name, faculty), full name of the student, teacher, title of the document, city and year of graduation are indicated.

The easiest way is to divide the report into 3 parts:

top block;
middle block;
bottom block.

Each block displays necessary information, so let's consider them separately.

Top block of title page

Here you can find information about the institution. That is, the country, name of the university and department are indicated. As we can see in the example, the MINISTRY OF EDUCATION AND SCIENCE OF THE RF is written in capital letters at the very top in the center. These words are often highlighted in 16 point type, but it is better to check with your supervisor and work according to his requirements.

The educational institution and the name of the department are indicated below:

According to GOST 7.32-2001, here, in the upper block on the left, the position, institution and surname with the initials of the person who approves the report and puts his signature, as well as the date and year of verification of the report, is written.

Middle block of title page

In the center of the A4 sheet, REPORT is written in capital letters, below is the name of the discipline, and then the topic. Instead of the word “REPORT” you can write “RESEARCH REPORT”, of course, if it is relevant to the topic. Here's what it would look like in an example:

If you are in doubt about how to write correctly, it is better to ask your supervisor.

Bottom block of title page

And the last, but no less important point is the writing of the bottom part. Here the position is written on the right, and the surname with the initials of the supervisor and the student on the left, and a space is also left for a signature.

This is what it looks like:

At the very bottom, in the center, the city and year of production of the report are written:

Sample of the first page of the report (title)

See what a completed report title page looks like:

Sample of a completed report title page

The samples were made using GOST 7.32 - 2001, which contains examples of the design of title pages of a research report. Also in this document It is indicated that signatures must be written in black ink or ink.

Of course, if the teacher allows you to deviate from GOSTs, then the title page is made much simpler. Therefore, before starting work and registration, you need to clarify all the nuances with your supervisor.

Template for the design of the title page of the report

Instead of a conclusion

In the article we looked at how the title page of a report is made using GOST 7.32-2001. To get a high mark not only for the presentation, but also for the design, study the relevant documents, check with the supervisor about his requirements, and then you will probably get this work high score.

How to make a report title page correctly - full analysis first page and sample updated: February 15, 2019 by: Scientific Articles.Ru

Friends, good time days. In any educational institutions, students are given the following tasks -. And today we will talk about how to design the title page of an essay in schools and universities. Since many students are facing this problem.

We will help you write any academic paper

After all, the following depends on the correct and high-quality design of the title page:

Firstly, the title page is the face of the abstract, your work. It immediately shows how responsibly you took the task.
Secondly, the teacher, looking at the title card, determines how correctly the work is formatted and evaluates it.

What is the title page of an abstract?

The title page is the very first page in educational work. It indicates the names of the department, the department, the name of the student and the teacher. In most cases, the title page is drawn up according to GOST standards, but this also happens. that university teachers are replacing these rules with well-thought-out training manuals.

In general, for the design of the title page, they adhere to 2 main state standards:

“Report on research work” - GOST 7.32-2001, which very well describes the main requirements that should be located on the title page.
"ESKD" - GOST 2.105-95 - general requirements for any text document.

Rules for the design of the title page of an abstract

Although teachers may require the student to adhere to the manual. Still, there are rules that cannot be avoided. But it’s better to find out the various nuances at the department in advance.

The title page of the abstract according to GOST includes the following parameters:

Not always, but the name of the country is written
Department name (abbreviated or full, ask the reviewer)
Name of discipline
Topic of scientific work
Full name, course, group number
Full name of the recipient, his position
author
What city does the author live in?
In what year was the document completed?

You also need to remember the following: the title page is not numbered. I wrote about almost all versions of numbering.

Also, GOST does not specify the font and therefore teachers set it to Times New Roman, 14 pt.

Correct design of the title page of the abstract in Word according to GOST 2017—2018

In the center of the sheet, with caps lock turned on, write the name of the department or ministry of your educational institution. For convenience, use Caps Lock.
Next write the name educational institution, full or short, while maintaining single line spacing.
Below in quotation marks is the name of the department
In capital letters, in the middle of the sheet they write in a font size of 16-20 pt - “Abstract”
Then the subject on which the essay is being written and the topic
Then, to the right of the center, write down the full data of the author and the person being checked
And the last stage - at the bottom of the page in the center the city and year

Sample title page of an essay for students

As mentioned above, title pages of the essay may differ depending on the educational institution. Some require adherence to GOST standards, while others require training manuals.

Requirements for the title page of an essay in schools

Just like in universities, in schools children are also asked various types tasks such as reports, abstracts. And many schoolchildren want to get an excellent grade from their work. And therefore, the question of how to make a title page correctly interests almost every student. Let's highlight the main requirements:

Full name of the school
What type of work (essay, report, etc.)
Subject of work (not compulsory in primary school)
Topic and name of the project
Student's name and class
Last name of the checking teacher (also not required in primary school)
City ( locality) and date

Rules and example of designing the title page of an essay for school

Settings in Word

Indents: right - 10 mm, left - 30 mm, top and bottom - 20 mm each
The font of the title page of the abstract is Times New Roman, 14 point, the name of the educational institution is 12 point, the name of the project is 28 point and bold, the title of the work is 16 point and bold
Sheet A4

Sample

Abstract is summary information in writing. The material for it is collected from several sources. In this form, you can briefly summarize the essence of scientific work. After completing the essay, the student can show the level of his knowledge in this issue and propose your own ways to solve the problems.

There are two types:

Productive. Relevant sources are selected, interpreted and presented in abstract form. Criticism and a creative approach to writing are allowed. Such abstracts include: a review, which involves collecting information from several sources (may include several points of view); a report containing an assessment of the problem of the primary source includes a broad analysis of it.
Reproductive. It reflects the information contained in the original source. It can be in the form of a summary that contains generalized information about the object being presented; only facts, illustrations, and research results are used here.

Stylistics and design

All analyzed information is presented in standard language using cliched speech patterns, for example: “is important”, “problem under study”, etc. The abstract is characterized by generalizing words, specialized terms and phrases that correspond to the topic of the primary source. An abstract is a kind of scientific work, and it requires a strictly defined sequence and design.

Title page structure

The first thing people pay attention to when checking a work is the design of the title page. It must, firstly, be clean and tidy, and secondly, you must remember that the design structure has official requirements. But despite this, the educational institution may also have its own requirements for the title page of the essay.

If you pay attention to the standard requirements, you can distinguish 4 design blocks:

Upper. Includes title educational institution.
Central. Type of work: abstract, report, etc. The topic of the work should also be covered here.
Right. Contains information about the author and the reviewer; signatures, ratings and notes on the work are placed in this place.
Lower. Includes the name of the city and the year the work was performed.

The Ministry of Education regulates certain requirements for indentation and even for fonts and their sizes. But some educational institutions may have their own requirements. To avoid any misunderstandings later when submitting your work, you must ask your teacher in advance about how to format your essay.

Using this video as an example, you will learn how to design a title page in Worde.

State standards

The title page of an essay for a school is practically no different in design from abstracts of other educational institutions.

Upper block includes the name of the educational institution. You cannot write abbreviations here, only the full name. All letters must be capitalized. The text should be bold and centered. Line spacing is 1, font size is 14 point. The top block should deviate from the edge by 2 cm, on the left by 3 cm, on the right by 1.5 cm.

Central block. It should be separated from the top block by 2 lines. It consists of several lines that display basic information about the work:

The type of work is written. Abstract, report, etc. The word is taking shape in capital letters, font size 16 point.
Indenting one line, write the name of the discipline. The first letters here must be capitalized. Font size - 14 point.
The next line displays the topic of the work, the title should begin with capital letters. Example: “On the topic: Types of scientific work.”

The alignment should be centered.

Right block. Information about the student who completed the work and who checked it is displayed here. There will also be notes from the teacher about the work, evaluation, and signatures. The font size should be 14 point, aligned to the right, 1.5 cm from it.

Bottom block. It should be done at the very bottom of the page on the last line, alignment - in the center, font size - 14 point. The distance from the bottom edge is 2 cm.

Thus, a sample design for the title page of a school essay looks like this.

It is important to respect the margin sizes when writing a paper. On the left side - 35 mm, on the right - 10 mm, on the top and bottom - 20 mm. The text should be formatted in Times New Roman font, size 14, line spacing - one and a half, alignment - width. It is necessary to create a table of contents that reflects the main subtopics of the analyzed information, with page numbers indicated next to it.

In the introduction, you need to justify the topic that the student wants to cover in your work, and the goals and objectives of the work should also be highlighted. It is necessary to explain the significance of the chosen topic in modern world and why the author touched on it specifically. Volume - 1-2 pages.

The main part is written in accordance with the outline of the essay and should fully cover the topic of the work, while each paragraph must begin on a separate page. In the title of paragraphs, only the first letter should be capitalized; a period should not be placed after it. You can highlight the main points and definitions in the abstract in bold in the text. The volume of this part is 12-15 pages.

In conclusion, the results of the work done are summed up and certain conclusions are drawn. You can also consecrate solutions to the problems and tasks posed. The volume of this part is 1-2 pages.

The list of references is formed last: from what sources the material was taken. The requirements for the list of sources are also covered by the regulations of the Ministry of Education.

It is worth noting that these requirements are general and may vary depending on the educational institution.