How to make beautiful notebooks. How to make a beautiful notebook with your own hands

Having learned how to make a notebook with your own hands, over time you can decide on more serious crafts, for example, making your own book. Why not?

Having learned how to make a notebook with your own hands, over time you can decide on more serious crafts

Necessary:

Colored and White paper A5 format;
Cardboard for the base;
Fabric strip, satin ribbon, piece of gauze;
Glue "Moment";
Stationery clips;
Decor elements.

What to do:

Fold the sheets, dividing them into blocks. Between the blocks we make partitions with colored paper. We form a cardboard binding on both sides.
Secure the stack with clips. Place a piece of paper or ruler under the clamps so that no trace of the clamp remains.
Cut a piece of gauze equal to the width of the paper binding. Place gauze over the joint and cover well with glue. The product must dry thoroughly. For strength, reapply glue to the gauze on the back.
When the craft is completely dry, decorate the binding with satin ribbons, small beads, lace, or simply draw a funny design. Hide the edges with fabric strips.
Hide the gauze sizing under the fabric strip.

If there are no sheets of the required format, replace the material with notebook sheets. Remove the cover and leave the connecting brackets on the sheets. Next, do according to the instructions.

Gallery: DIY notebook or notebook (25 photos)

A simple DIY notepad from scratch (video)

Small notebook for girls

Necessary:

White sheets of A4 format;
Colored cardboard, a piece of fabric;
Stationery knife;
Ruler 2 pcs.;
Pencil;
2 clamps;
PVA glue, brush.

The notebook is decorated according to the wishes of the little princess

How to do:

On the first sheet, make markings with a pencil according to the specific size of the notebook.
Draw a line to the other side of the paper. Secure the paper stack with clamps and cut the pages of the product with a knife. Place the sheets together.
Using colored cardboard, trace the dimensions of one piece of paper and cut out the front and back sides of the cover.
Connect the sheets with the covers, placing rulers on both sides and fastening them with clamps. Leave to dry for several hours.
Coat the fabric base well with glue. Cover the area where the notepad is glued with a cloth and press it back with clamps until it dries.

Decorate the corners of such a notebook with braid or lace, gluing the ends with reverse side. Need to divide your notebook into blocks? We use thick cardboard, laying it through the same number of pages.

How to make a notebook

A simple notebook is easy to make yourself. For example, a new notebook can be folded from double sheets of old notebooks.

Collect all the double leaves, carefully pulling them out from the staples.
We use thick colored paper as the basis of the notebook.
Folding it in half, we connect the bend with the notebook leaves.
If the holes from the staple do not match, you can sew the product with a sewing machine. This way you can hide unnecessary holes.
Fold the sheets together and secure them with a clamp to prevent the paper from moving.
Next, use staples from a stapler to fasten the stack using pliers along the existing holes.

A simple notebook is easy to make yourself

Iron the middle curve of the notebook using tracing paper.

How to sew a notepad with your own hands

Necessary:

Sheets of paper or notebooks;
Pencil, ruler;
Paid cardboard;
Needle, thread.
Decor.

When sewing it is better to use a sewing machine

What to do:

For crafts, collect all unused notebook sheets. Carefully fold them together and secure them with clamps.
Mark the middle curve of the future product with a pencil and bend it along the line.
Separately, make a cardboard backing of the same size as the sheets.
Place sheets of paper on a thick base. Sew along the bend with thread. To make the seam beautiful and even, use a sewing machine.

Homemade covers for notebooks and textbooks: ideas

Habit of collecting wrapping paper from gifts or leftover wallpaper after renovation will be very useful here. This material makes very beautiful covers.

For the book

You will need:

Ruler, pencil;
Small tape;
Scissors;
Decor.

The cover can also be made from fabric

How to do:

Spread wrapping paper or a piece of wallpaper on a flat surface. Place a book in the middle of the sheet. Mark the size of the book on the paper with a pencil.
Fold the wrapper along the lines of the book cover and secure the edges with tape.
Trim off any excess paper evenly.
Decorate the edges with lace or decorative colored tape.

For a more disheveled book, the cover can be done like this:

We take a regular cardboard folder. Remove the old book cover. Place the book on the folder, mark the size of the future cover with dots, and cut it out.
Along the middle bend of the cardboard, we measure in different directions a width identical to the width of the binding of the pages. At this point we glue a wide satin strip with silicate sealant or Moment glue, ends inward.
After drying, cover the outside of the base with wrapping paper. Form the corners, decorate them with metal corners using pliers, after gluing them.
Using felt-tip pens and a piece of colorful fabric, make an inscription - the name of the book being restored.
Glue the cover base to the stack of book pages. Secure the adhesive area with stationery clips through the rulers.

For notebook

Necessary:

A4 format folder;
Scissors, glue, small tape;
Ruler, pencil;

What to do:

Place wrapping paper on your work surface. Open the folder at the top. Place the notebook with the middle turned out on top of the folder.
Make notations - dots according to the size of the notebook. Draw lines with a ruler and cut out the covers.
Glue the packaging wrapper onto the cut out cover from the folder, secure the edges with tape, decorate with braid or fabric border.
Remove the paper clips from the notebook and remove the old cover. Mark the future fastenings of the cover with dots through the holes.
Use a needle to make neat holes at the level of the dots. Re-attach the notebook sheets with the new cover using the same paper clips.

Very good cover option from old newspaper. This binding will surprise you with its simple execution but unusual design.

Necessary:

Old yellowed newspaper or book pages;
Tracing paper, thick paper;
Colored pencils, felt-tip pens;
PVA glue, scissors;
Fabric strip for edge decoration.

How to do:

Carefully and evenly glue the yellowed sheets of newspaper onto thick cardboard. Iron through tracing paper.
Draw a design on the front side with pencils and outline the outlines with a felt-tip pen.
Fold the product in half. Place the book on the cover, bending the ends along the book contour, securing with tape. Trim off excess.
If the cover is intended for a notebook, attach it with staples along the line of the middle bend. Trim the protruding edges, decorate the ends with fabric or outline with felt-tip pens.

The fabric makes a good, soft cover. You need to make it the same way as paper, only stitch the ends with bright colors. woolen threads. For decoration, decorate with fabric figurines of flowers, animals or pen pockets. For a loved one, you can make such a cover in the form of miniature hearts sewn to each other.

Budget school supplies and DIY stationery (video)

Today, the art of needlework has gained wide popularity, and crafts self made recognized as an exclusive and unique creation. While learning to be creative, create your own collection of hand-made masterpieces or, alternatively, update your long-worn old library. Joint activities with your child with fun adhesive notebooks and notebooks in anticipation of school lessons economically beneficial for the family budget.

In this article we will look at two techniques to answer the question of how to make a notebook from any material with your own hands. Using the first technique, we will show you how to make a notebook out of paper, which involves the process of assembling a notebook from scratch according to the same principle as how books are bound. The second technique will tell you how to make a notebook from a notebook, namely a removable notebook block. At the end, we have prepared a video selection of master classes on making notebooks that will help you better understand the process.

How to make a notebook with your own hands using several techniques

Materials needed: 48 A4 sheets (you can change the quantity depending on how thick you want to make the notebook), cardboard, thicker paper for endpapers, Moment glue or good PVA, needle and thick thread, 2 strips cotton fabric 1.5 cm wide, fabric for cover design.

We create the binding of the future notebook

To begin, take 3-5 sheets and fold them in half, creating one so-called notebook. We put the notebooks together so that they lie neatly and evenly and, clamping them with paper clips, measure the required distance in order to make holes through which we will stitch the notebook.

It is more convenient to make holes with a stationery knife, with which we make not very deep cuts in the places where we marked the holes.

As a result, we get all the notebooks with neat holes.

We sew the notebook along the marked holes with a “forward needle” seam, grabbing the fabric but not piercing it. We do not tie a knot on the tail and leave it as is.

We pass the thread over the fabric, braiding it, and sew further. The tip of the thread that remains from the first stitch must be tied to the thread at the puncture site.

We take the third notebook and do the same. When we braid another thread over the fabric with a thread, then with each subsequent notebook we braid only the previous thread, and not all the existing ones. At the end, tie a knot again. If you suddenly run out of thread, you should replace it in the place above the fabric strips, where the knot will be invisible. When you have sewn the last notebook, you will need to make two sewing knots on the edge and trim the thread.

The next step is to coat the spine with glue.

We thoroughly coat the entire surface of the spine with glue, filling all the cracks. Next, we need to put the notebook under the press until the spine is completely dry.

Making a stylish cover

First, glue the top and bottom edges of the fabric.

Trim the corners of the fabric.

And seal it completely.

We decorate the cover and use the endpapers to combine the cover with the paper block, first by gluing the binding to the cover and then securing it with the endpapers.

The second version of a notebook based on a ready-made notebook block

Necessary materials: removable block for A5 notebook, thick cardboard, endpapers, double-sided tape, glue gun or Moment glue, a stationery knife, a ruler and an eyelet installer. Separately select the elements with which you want to decorate your cover - fabric, decorations, etc.

Let's start with creating the cover

We cut out two rectangles from thick cardboard that are approximately 5mm and 1cm larger in width and height, respectively, than the notebook block itself.

Using double-sided tape or glue, you need to glue the padding polyester rectangles and trim off the excess along the edges.

At this stage you can show all your creativity and imagination. Choose exactly how and with what elements you want to decorate the cover, and get creative!

We make endpapers using scrap paper or just thick paper on which you have printed the desired pattern or design. The flyleaf should be 5mm smaller than the cover. You can attach the cover to the endpaper using sewing machine, a simple straight stitch. If this is not possible, then you can use superglue.

Surprise today an unusual gift It becomes increasingly difficult, especially if it is bought in a store. Although the assortment there is quite impressive, the downside is that we have already seen it all somewhere.

Stores buy goods in batches, so it is very unpleasant to see the same thing as someone else. It’s another matter if a gift is made with your own hands; it has much more advantages than a store-bought item.

The uniqueness of a handmade gift

Firstly, such a gift will be exclusive, one of a kind, even if someone tries to repeat it, the likelihood that they will be similar is reduced to zero.

Secondly, by making a gift with your own hands, especially for a specific person and taking into account preferences, the gift will emphasize his individuality. After all, most mass producers think in stereotyped ways.

Thirdly, such gifts always bring warmth, and looking at such a masterpiece the author will be remembered with love.

Handicrafts are now experiencing a rebirth, and in addition to knitting or embroidery, new types are appearing, which are gradually gaining popularity among handmade lovers. One of these areas is scrapbooking or handmade notebooks.

Very often you can see photos of such notebooks in popular in social networks. And colleagues, housewives, and children will be happy with such a gift. Notepads are never superfluous. Making them yourself is not that difficult.

We offer several step by step instructions How to make a notepad with your own hands. Moreover, even those who have nothing to do with needlework can do it.

And if, after all, labor lessons at school were not your favorite, then you can use our advice. As a result, you get a beautiful notebook with minimal time investment.

Office at home

The notebook master class, which is presented below, is similar to a regular notebook. Making such a notebook is easy and simple.

So, to make it you will need:

A4 paper;
cardboard;
hole puncher;
awl;
stationery clothespins;
stationery knife;
wooden plank;
ruler;
needle and thread;
glue;
sandpaper or nail file;
scrap paper, decorative tracing paper, fabric, lace, beads, etc. (For decoration).

Progress

We take several A4 sheets, the quantity depends on your desire and the power of the hole punch.

We fold all the sheets in half, you can iron the fold with a ruler, this will make it smoother and neater. We put them one inside the other to make an A5 booklet.

Tip: Notebook pages can be decorated in a vintage style. To do this, before assembling the notebook, you need to soak them in coffee or tea for 30-40 seconds, and if you make creases on them in advance, the effect of antiquity will be even brighter.

For the next step we will need a hole punch. We insert the folded sheets from the fold side into the hole punch, so that semicircular holes are created along the edge. Next, you should open the notebook and look through it so that all the sheets are punched.

If the pages do not stick out evenly when the notepad is closed, this needs to be corrected. We lay a wooden board and cut the sheets with a stationery knife. The cut edge must be processed with a nail file or fine sandpaper to remove all roughness.

Note!

We fasten the notebook using regular thread; for strength, it can be folded in half. We insert the thread into both holes from the inside, pull it out and pull it well. Tie a knot and cut off the excess thread.

It is worth considering that for a full-fledged notebook you will need at least several of these mini-notepads. After we get the desired thickness, we lay a stack of several notebooks on both sides with cardboard, and fasten the spine with stationery pins.

The rest should be placed under the press. Thick books will ideally cope with this role. The notepad should remain under pressure for some time (approximately 3-5 hours). In any case, the longer it stays there, the better it will stick together.

The next stage is the second firmware update of the entire notebook. Making holes with a hole punch at such a thickness will be problematic or even impossible. Of course, you can divide this process into several stages, but there is a risk that the holes will be in different places and this can ruin the whole idea of the notebook.

But there is a way out here too. To do this, on the top notebook you need to use a ruler to make notes for future holes, and then carefully pierce them with an awl through each paper layer.

Note!

To prevent the notebooks from sliding off one another, you should secure them with stationery pins, stepping back slightly from the edge of the spine.

Then you should sew all the notebooks with a needle and thread through the holes made. It is better to secure the thread with several knots. Next, you should glue a sheet of cardboard to the stitched spine and secure it with office clothespins.

When gluing, make sure that the glue fills every gap between the sheets of paper. Next, you need to remove the remaining glue and put it under the press until the notebook is completely dry.

As soon as the glue has dried, you should start making endpapers from colored cardboard, scrap paper or decorative tracing paper. They should be glued to the inside of the cover, and a hard spine should be made from cardboard, but it should be glued to the outside. We decorate the front side of the notebook with our favorite techniques.

Tip: To make a beautiful endpaper, it is best to use scrap paper. You can purchase it at a bookstore, office supply, or craft store.

Note!

The cover is everything

Making a notebook out of paper is half the battle; the other part of the job is decorating its façade. After all, the first thing we see when looking at a notebook is the cover, and based on it we decide whether we like this thing or not, whether we want to open it or not.

There are several ways to decorate a notebook cover:

Use ready-made scrap paper kits. Create your own elements to decorate a notebook: you can use almost any fabric of different composition and texture, lace, leather, rhinestones, beads, clippings from magazines and newspapers, photographs, shells and sea pebbles and much more that can be found in any home!

Here are just a few examples of how you can creatively decorate a notebook:

You can sew a soft cover onto a notebook if you put thin foam rubber between two layers of fabric;
for decoration, you can use photographs or other pictures related to hobbies or certain events (for example, receiving a diploma), as well as clippings from magazines;
if you use phosphor stickers in the decor, the notebook will glow in the dark;
You can also make a memorable inscription with invisible ink - such a surprise will be unexpected;
If you sew a thin magnet into the cover you will get a notebook that attracts good luck.

If making notepads is not your thing, show it creativity If you want, you can cheat a little and decorate a ready-made notebook, previously purchased at the store. It will look no worse than a handmade notebook.

It should be remembered that no Notebook, bought in a store, cannot compare with a notebook made with my own hands and given with love! You can give it as a gift for any occasion.

DIY notebook photo

The role of notepads in our world is known to everyone. We write in notebooks important dates, phones, reminders, passwords, etc. For some, a notebook is a “safe” in which the most important and secret thoughts are stored, while for others it is a collection of author’s poems. Everyone uses this notebook for their own purposes.

But if you want your notepad to be unique, or make original gift, there are many ways to make a mini notebook with your own hands. They are all different: one requires just one sheet of paper, while the other requires fabric, stationery and other materials.

Mini notepad made of one sheet

For this method of making a mini notebook, you really only need one A4 sheet of any color and scissors. This notebook can be made in a maximum of 5 minutes.

The downside of such a book is that there won’t be very many sheets, but it is easy to make.

Manufacturing

Step 1

First you need to prepare all the necessary equipment for the work - a sheet of A4 paper and scissors.

Step 2

Fold a sheet of paper in half lengthwise, as shown in the picture:

Step 3

Repeat the same steps as in step 2 one more time.

Step 4

Unfold the sheet and fold the sheet of paper in half crosswise, as shown in the picture:

Step 5

Without unfolding the sheet of paper, repeat step 4.

Step 6

Expand the sheet. You should get 16 equal rectangles.

Step 8

Then you need to make 3 cuts with scissors along the lines, to the center fold line, as shown in the image:

Step 9

The next step is to cut 2 central rectangles along the fold lines.

Step 10

Unfold the sheet and bend the cut rectangles along to different parties as shown in the picture:

Step 11

Turn the sheet over and fold the bottom up.

Step 12

Bend the upper rectangles towards the lower ones.

Step 13

The two parts of the resulting structure need to be folded towards each other.

Step 14

Carefully place this structure edgewise on the table. If everything is done correctly, then the following hole will form:

Step 15

Connect the 2 parts of the future notepad to each other, as in the image:

Step 16

The two remaining rectangles need to be folded and smoothed to either side.

Step 17

Fold the remaining sides of the notebook into a book and iron all sides well.

Step 18

Mini notepad is ready! All that remains is to decorate it with stickers or markers.

What are the benefits and harms of bananas?

10 Signs You've Been Visited by an Angel

9 of the most terrible tortures of the ancient world

Mini accordion notebook

Necessary materials

A4 sheets of any colors;
Glue stick;
Super glue;
Ruler;
Pen or pencil;
Self-adhesive paper with a pattern;
Decorative tape and tape.

Manufacturing

This option for making a mini notebook is heavier than the previous one, but in this case there will be more pages in the notebook, and the book itself will look more beautiful.

Step 1

Fold the A4 sheets in half crosswise to mark the middle.

Step 3

Using scissors, carefully cut out rectangles. The more rectangles there are, the more pages there will be in the book.

Step 5

The resulting strips also need to be folded in half, only lengthwise.

Step 6

Each edge of the strips must be bent to the opposite side, as shown in the picture:

Step 7

The letters “M” should look like this. You need to make as many of them as there are pages in the book.

Step 9

Once all the tape is assembled, you need to coat one side thoroughly with glue.

Step 10

Assemble the accordion and place it under a press of several books so that all the sheets stick to each other.

Step 11

Now you need to make a cover for the future notebook. To do this, you need to cut a rectangle out of paper. It will be the same size as for the pages of a book. It needs to be bent in half across.

Step 13

Adjust the cover to fit the notebook. Make the necessary fold lines along the edges and in the middle.

Step 14

Cut out the same rectangle from self-adhesive paper as for the pages.

Step 15

Glue the paper to the outside of the cover rectangle.

Step 16

Glue the inner side parts of the cover with superglue and let dry.

Step 17

If desired, you can glue tape on both sides of the cover for additional decoration.

Step 19

The last step in making a notebook is to tuck the pages into the cover. The mini notebook is ready!

Just like magic, I found another one detailed master class on making a notepad!

It mentions the company Moleskine® (pronounced correctly moulskin), which makes notepads. Only their notebooks are not at all banal - I have one - the quality of both the paper and the build is excellent. As a connoisseur and collector of notebooks, I can say this with complete confidence. It’s just a pleasure to pick up such a notebook, open it, stroke the surface of the paper with your hand and write something on it.

(photo from the Internet)

So with my own hands I want to make something that would give aesthetic pleasure to pick up and use.

***********************

Not long ago I came across the word “Moleskine” ( Moleskine®). The definition was not familiar to me. And imagine my surprise that this - trademark a company that makes the most banal notepads.
I've been finishing all my notebooks since school. I glued pockets with separate leaves for quick lists, created multi-bookmarks, and tinted the edges of the sheets. Later I got electronic notepads, but that's a different story.

In the vastness of the RuNet I met detailed lesson for making an unusual notebook. Making your own notepad is not difficult. The master class contains a detailed photo report with comments from the author. I present the article “as is”.

A technique similar to classic book binding is described. First we need regular office paper. You can combine colors, sew in dividers, etc. I used A4 paper 80 g/m2 in vanilla beige color and designer colored tracing paper 90 g/m2.

We select sheets of paper in a notebook. If the paper density is about 80 g/m2, then it is optimal to select 5 sheets. If the paper is thicker, then it is better to make notebooks of 2-3 sheets.

Fold the notebook in half:

And so on several times until the desired thickness of the future block is achieved. I have 13 notebooks here, i.e. The notebook will contain 130 sheets of A5 format.

We place the future block at the spine with two pieces of binding cardboard (this is done so that there are no dents left on the paper from the staples, and it is pressed evenly) and secure the spine with office clips, as shown below:

The block usually sits under pressure for about 3 hours, but I often leave it overnight.

While the paper is being pressed, you can look out the window and drink a cup of coffee :)

When our notebooks are compacted, we open the clips and straighten the spine by tapping them on the table. We secure the perfectly even spine again with clips, like this:

Next we have to cut 6 holes on equal distance on the spine. I use a pre-prepared sheet of paper with markings; for an A5 notebook format, you can download one from this link and print it out. If the format is non-standard, I think you can easily mark the block with a pencil and ruler :)

We saw these holes on the spine (as one option, you can draw marks on the spine itself, and then use an awl to pierce holes in each of the notebooks, but in my opinion this takes longer):

I used a small file with three edges, bought at Auchan :)

When our holes are ready, we can easily and masterfully sew the block. We will need two fabric ribbons. I use cotton. The tapes should be of such width as to fit between two sawn holes:

I feel comfortable sewing by placing the block on the edge of the table facing me. There may be variations here, but the main thing is to try not to wrinkle or stain the paper in the process. Often, at first, not everyone succeeds. For sewing I use leather needles and Iris thread for crochet. We place one of the notebooks in front of us, as indicated in the photo.

We sew the first notebook with a “forward needle” seam, using a single thread, leaving the tail outside. We do not pierce the fabric ribbons, but simply bend them around with thread:

We place the second notebook on top of the first one, without confusing the right and left edges of the notebooks, i.e. don't turn them over. We insert our needle into the hole in the second notebook:

And we stitch it in the same way as the first one, catching the thread on the thread of the previous notebook in the place where we go around the tapes:

When we have reached the edge, we tie the working thread and our left tail into two or three knots, having first pulled them up well:

Place the third notebook on top and do the same:

In the places where our ribbons are located, we hook the working thread to only one previous one:

Sew on the third notebook:

And now we must tie a knot, connecting the third notebook with the previous ones. To do this, we thread a needle through a thread between the 1st and 2nd notebooks:

We remove the needle, leaving a loop:

And we thread the needle through the resulting loop like this:

We press the notebooks together to make our knot tight:

It is essentially a simple sewing knot and is often tied when finishing sewing. Now we boldly lay all subsequent notebooks on top, sewing them to the block and tying knots along the edges

If you run out of thread, it is convenient to tie it on at the moment when we are above the ribbon. In this case, the knot is guaranteed to remain on the spine and will not be visible on the finished product.

When all the notebooks are sewn together, we tie not one, but two or three sewing knots on the side.

Place the block again between the cardboards, Special attention giving an even spine. Notebooks should lie next to each other:

And we fasten our improvised press from above and below:

Now you need to glue the spine. I use Silicone Sealant from Moment. It holds notebooks together quite firmly, while remaining elastic even after drying, as a result of which the notebook opens and leafs easily. Also, after using it, there is no need to additionally glue the gaps between notebooks.

Apply sealant to the spine:

And spread it along it with a sponge, paying attention to filling every crack.

When all the cracks are filled, you can remove the excess and level the layer.

We fasten the clips along the spine again, trying to get as close to it as possible with their “pressing” part.

Usually the block takes an hour to dry, but if possible, it is better to leave it under pressure longer. I also often leave it overnight.

In the meantime, we can prepare future endpapers. For them we will need two sheets of thick paper (in our case A4 format), preferably from 180 g/m2, you can use scrapbooking paper. We make creases in the middle:

And fold them in half, with the “beautiful” side inward:

As it dries, we take our block out from under the press:

I glue on a couple of pieces of kraft paper before I glue on the endpaper. It will tailor the relief of the ribbons under the endpaper and add strength to the product.

I glue it using a UHU glue stick like this:

And I glue the ribbons on top of the craft:

Next we glue on the endpapers. I like to make durable and good quality notebooks, so I use Moment Crystal glue. To apply the glue strip evenly, protect with a sheet of paper that part of the block that the glue should not get on:

We remove the sheet and glue the endpaper. We glue a piece of craft paper with ribbons onto the endpaper at the top:

Now we have to align the edges of the resulting block. There are 4 ways:

1. Buy a simple guillotine cutter. It justifies itself if you plan to make notebooks often and in large quantities.

2. Try cutting it manually using a construction knife. The knife can be bought in Auchan, Leroy Merlin, etc. Choose an expensive, heavy knife and good replacement blades. Break blades as often as possible. At first glance, this method seems impossible, but in my master classes many people manage to cut the block quite decently the first time. And with certain training, it often turns out not far from ideal.

Place a metal ruler at the edge and press it firmly against the block with your left hand. You should not cut less than 5 mm, it is very difficult. Right hand cut with a knife, holding your hand strictly perpendicular to the work surface. We pass the knife over and over again without pressing hard. It’s better to have more “passes”, but almost no pressure. As a result, the cut can be processed with fine sandpaper.

Photo from my MK:

3. You can take the block to a printing house near your home or work. Often they will not refuse to trim a block, and it costs around 5-15 rubles. per block. If there is only one block, they often cut it for free :)

4. Leave as is:) The shaggy edge emphasizes that the product is handmade.

I'm using the cutter:

As a result, we get a finished block.

I already wrote once how to make a notepad out of a block, but some things there are outdated, despite the fact that general principle remained. I promised to update the information a long time ago - and here it is :)

We will need two binding cardboards slightly larger than the block size and 300 g/m2 cardboard for the spine.

We cut the cardboard so that when placed on the block there is 5 mm left over on 3 sides, and the spine has 5-7 mm less:

On cardboard for the spine (mine is 10 cm x cover height) we make several creases 7 at a distance of 2-3 mm from each other. This is done so that the spine is beautifully rounded during use. The distance from the first to the last creasing should be 3-4 mm greater than the height of the block spine.

This is approximately how the cardboard spine should sit on the block:

Now we glue the spine with the cover cardboard. I use Moment Crystal glue. Do not forget to retreat those 5-8 mm from the outer creases on the spine, which we laid when cutting the cardboard.

I want a softer notebook, so I glued an extra layer of fleece on top :)

The cover frame is ready. Now we are preparing a piece of fabric that is 15-20 mm larger than the cover. Be careful: if there is a pattern on the fabric, follow it top-bottom and right-left :)

Iron the fabric and starch it a little.

Place the frame of the cover on the finished fabric, soft side down:

And apply glue at a distance of about 3-5 mm from the edge. Here I use Corfix Hobby Glue.

Glue the long sides, you can additionally iron them:

Now our task is to make neat corners. First we iron the fabric like this:

And then like this:

When we glue the short sides of our cover, we will get these corners:

Here the cover is almost ready:

Just in case, we try it on our block - it fits perfectly!

Now is the time to add sew-on embellishments and embellishments that attach to eyelets or brads to the cover. You can save the adhesive decorations for later. I will have a notebook to write down dreams :)

On the block itself you can weave a captal:

You can glue a bookmark or several to the cover. I glue them on with a hot glue gun.

Here's the finale :) Let's try on the block for the cover:

We place two sheets of clean paper between the endpaper sheets, apply Moment Crystal glue to the endpaper and close the cover, trying to glue it as evenly as possible. The same goes for the back of the notebook. If decorations allow, the finished notebook can be placed under a press or simply pressed firmly on it.