How to make a slingshot out of paper. How to make a slingshot from paper Pocket weapon: where to use a slingshot

The slingshot has long been perceived as nothing more than an attribute of defense and attack by all the boys in the yard. For easy way Its model, which you can make with your own hands, has become a favorite toy and even a weapon for adult men for small game. Currently, the slingshot is still very popular and has unconditional respect among boys different ages. Despite its apparent simplicity, its manufacture can be different from each other, as well as the material used.

It is a mistaken opinion that a slingshot is just a small mini weapon for hooligan boys. A professional slingshot in the hands of a fighter can become a real weapon with which you are not afraid to go at the enemy. To obtain such a weapon block, experts use the highest quality materials: titanium, carbon fiber. Supplemented with a laser pointer or collimator sight, it was often used to restore order during mass riots. A combat slingshot is also used as a first “assistant” when firearms was not used appropriately. The purpose of the slingshot is not specified; everyone uses it for different purposes. Later we will describe ways in which you can do without a slingshot, but with its help make the work easier. Let's look at what a slingshot is for, how to make it yourself, and figure out which material is preferable in everyday use.

The slingshot is throwing weapon, in which the projectile acquires kinetic energy potential energy, stored in a stretched elastic band.

Origins of the slingshot

The meaning of the word “slingshot” itself, according to some unreliable sources, comes from the word “horns”. Indeed, they do have certain similarities. It is often compared to a catapult, only in this case it is a miniature device. Like many inventions that have survived to this day, the slingshot was created by Leonardo da Vinci. The original device was a slingshot without rubber, and instead there were special rollers on the axles. Inside there were springs with pulleys. A cord is attached to them, when stretched, the springs stretch and create conditions for precise and long shot. Over time, this mechanism was replaced by a simpler one replaced by rubber.

What does a slingshot consist of?

In appearance, the slingshot does not have a complex mechanism, however, it is divided into several important units:

The body of the slingshot, consisting of wood or less often metal;
A throwing tourniquet that accumulates energy;
Boot, heel or saddle. Serves to hold the projectile. It may be absent if the projectile protrudes in the form of metal brackets.

A slingshot, similar to the standard model, is mainly made of wood (walnut, cherry, elderberry). For perfect shape young branches are taken as a basis in the shape of the letter Y, the young “horns” are tied together and left in this form for approximately two months. After which the shape of a regular slingshot is formed.

A serious approach to the manufacture of a slingshot determines the accuracy in the symmetrical placement of the horns relative to the handle of the base.

After two months, the slingshot is cut down. In order for the device to acquire a strong appearance, it should be cleared of the top layer of bark and dried, wrapped in material, for about two weeks. The slingshot is then fired over an open flame. From this point on, the ideal thickness and surface are achieved using sandpaper.

Correct selection of material

Slingshot body. Having become a favorite among young men, slingshots today are found in metal, plastic, wire, wood, and cardboard. Naturally, the most durable material from the above is metal, and then wood. It’s just that a slingshot made of wood is more common due to the fact that the complexity of working with metal cannot always be used at home. Plastic is no less durable, even mechanical stress is not harmful to it. Cardboard is only suitable for playing with children, but do not underestimate its power for throwing bullets.
Choosing a rubber band. According to numerous reviews, the most suitable option is rubber cable sheaths. The simplest option is a medical tourniquet, but only because it can be bought at a pharmacy. Many people recommend a Martens bandage, a GP 5 gas mask. A latex surgical drainage tube is considered very durable and malleable, but it is very difficult to get. More simple options used by those who need a slingshot only for the game, for example, rubber from a ball or a bicycle tire is used by young men. It is affordable, and its throwing properties absolutely meet their needs.
Kozhetok. Almost always it always has a rectangular shape. The material from which it will be made must be durable and provide reliable wear resistance. Usually it is leather, less often suede, dermantin.

Which projectile to choose

The good thing about a finished slingshot is that you can pick up shells for it even on the street; these can be ordinary stones. The size and shape are chosen by the owner himself for personal reasons. If you want to increase destructive power, speed, and impact when thrown, then opt for special metal bullets purchased in stores. These can be steel balls, lead shot, chopped lead, or drawing lots.

A simple option to make a slingshot with your own hands

A strong slingshot will be no worse than one bought in a store, if you approach your homemade product responsibly. Find a branch that looks like the letter Y. It is advisable to use sizes that are between 15 and 20 cm long.

To ensure the branch is strong and secure, make sure there are no cracks or chips before breaking it from the tree. It’s okay if there are small scratches on the branch; they can be easily cut off with a knife;
The bark will become redundant, so it is often removed. This is done for aesthetic reasons.

The best option would be a fresh branch. But the moisture it contains is excessive, otherwise the structure will lose reliability. How to dry it. The easiest way is to wrap it in material and dry it in the microwave. Use the correct step-by-step instructions:

Wrap the future slingshot in a small towel. Place in the microwave and leave on the highest setting for a few seconds.
The stick will create a hissing sound, when it stops, put it down again for a few seconds and do this several times.

The photo below shows what can happen if a stick is placed on for a long time no towel. It may turn black or even catch fire. So be careful, watch what you do.

Let's move on to creating notches. For this you will need a construction knife. Make cuts on the top of each branch, as shown in the photo.

Let's move on to the choice of tires. IN in this example medical tubing will be used, you in turn can use another rubber band, for example, a tourniquet, rubber from an old ball or bicycle camera. The diameter is 80 mm, and as for the length, you decide what it should be. The traction force depends on this. The shorter the band, the stronger the throwing. Don’t forget that it still needs to be stretched, so you shouldn’t make it too short either. Once the length is chosen, cut the two tubes in half and tie the end of each to its own notch.
Tie a piece of dental floss around the tube. The thread will tighten the tube and make it strong.
Let's move on to creating the skin. It is not difficult to cut from any durable fabric, preferably leather. A 10x5 rectangle should have a small hole on each side (0.8 - 1.20 cm). Later we will thread the traction tube through these holes.

Now everything is simple. Pass each end of the rubber tube through the holes. Make a knot on each one. Manipulation with dental floss can also be used in this case, the structure will become much stronger.
The slingshot is ready. Practice using your new slingshot to shoot down some inanimate object, train your eyesight and accuracy.

This example is more suitable for the amateur method of throwing stones or other small equipment.

An original slingshot for homemade work with children

It's no secret that most children who like slingshots are boys. Therefore, you can use this master class as a development activity for your son or grandson. To start the process you will need the following tools:

Tube from toilet paper. You'll have to prepare in advance; you won't unwind a whole skein;
Insulating tape;
Pencil;
Rubber;
Scissors.

Take a cylindrical shape of toilet paper and cut it vertically, this will make it easier to roll. Roll it into a stick and wrap it with electrical tape.
At the end of the cardboard stick, make a hole the diameter of a pencil. Insert it, turning it round and round.
Let's move on to the skin. To make it you will need durable cardboard. Using scissors, cut out a rectangular shape and use a hole punch to make holes for the elastic along the edges.
You determine the length of the elastic yourself; if you don’t stretch it on one side only, it is approximately equal to the length of a pencil. Insert it into the holes of the leatherette, tying each end into a knot. And twist the other end onto the end of a pencil and tie tightly. This way you will get a slingshot that you can play with at home, and you can come up with anything you want in the form of bullets. For example, soaked paper from which you form bullets with your fingers.

Slingshots made of cardboard will be stronger when the handle, which bears the main force, is strong. Therefore, it is better to additionally wrap it with adhesive tape.

Rules for using a slingshot: caution

Some types of slingshots are considered melee weapons, but even if the slingshot you buy is legal to use everywhere, this does not open up the boundaries for you to shoot animals and people. Do not hold the slingshot at eye level and do not aim at the eyes of the person standing next to you; even a small bullet can lead to dire consequences.

How to make a hunting slingshot with your own hands

What makes a slingshot ideal is the correct design, and it doesn’t matter what material it consists of. The elastic band, in turn, ensures fast and accurate flight. To find the required forked branch you will have to work hard, but you can use a jigsaw. In order to make a slingshot for hunting we will need:

Jigsaw and wood or ready-made slingshot branch;
Sandpaper for sanding;
Rubber;
Construction knife;
Drill;
A small piece of leather.

When the slingshot-shaped branch is in your hands, we begin sanding away the tree bark. If you decide to use a jigsaw, know that the handle should not be flat, and the horns must be made the same in distance between each other and in length.

We cut out a flat flexible plate from leather. We make holes on the sides for the elastic and thread it through, tying it at the ends.

To attach the elastic band to the slingshot, you can use a drill and make corresponding holes at the ends of the horns, or you can make cuts with a knife. Both methods are welcome. The main thing is that the knot is strong.

The horns should be at the same angle from the handle. And the handle, in turn, should not be too thin, since you will have to shoot from it often, the design should be durable.

You can expand your imagination and create a completely different type of slingshot using a plastic bottle. You will need:

Plastic bottle;
Construction knife;
Rubber band for money;
Finger cap.

Cut off the top plastic bottle. We don't need a lid. We put the fingertip on the neck and tighten it with an elastic band. That's it, the slingshot is ready, all that remains is to put the projectile inside and take aim.

The best stretch for a slingshot is 80% of the resting length. A good option for the throwing harness is latex.

Pocket Weapon: Where to Use a Slingshot

The first thing that comes to mind for a person who is not interested in this type of weapon is the boys playing in the yard. But the slingshot has a much broader horizon and its properties very often become useful at home. Let's figure out where you can use a pocket weapon.

Anyone who has a vegetable garden or garden knows that very often it is attacked by petty thieves such as crows and other types of birds. You can save yourself with a scarecrow, but if it doesn’t help, you can drive away the ill-wishers with a slingshot. Just be extremely careful so that if you miss, there is no other person far away from you.
“The pear is hanging - you can’t eat it” - this is how the well-known riddle begins, but today is not about it. The slingshot can be used to aim to hit the fruits that are located at the very top of the fruit tree.
The tourist needs to give the slingshot its due. The foreign country is full unexpected surprises, unless, of course, you are aware in advance about some of it hazardous areas. In this case, a slingshot can be useful in scaring away wild animals and protecting yourself from dogs. If you decide to stay overnight in the forest for a few more days, then this is the perfect time to try your weapon on small animals. Such hunting does not require licenses or special permits.
Anglers often use a slingshot to throw food into the distance of a reservoir.
With the help of a slingshot they develop accuracy. Using it for such purposes, in a very short period of time, you will shoot down targets from a very long distance.

As you can see, a slingshot is a very useful throwing device that is accessible to every person. You can put it in your pocket and carry it with you as a protective device.

How to make a slingshot for fishing

Perhaps it will be a discovery for many that slingshots are used to feed fish at a distance of 30-40 meters from the shore, but not for the fishermen themselves. This simple device is popular nowadays. Characteristic feature for the slingshot used in the fishing industry is rubber. The force of flight depends on its rigidity. The softer the rubber, the closer and vice versa. In fishing stores you can find two types of slingshots: for crumbly mixtures of complementary foods and complementary foods in lumps. Consider the master class of a slingshot, which in fact will turn out to be no worse than the factory version.

We will need:

Pezzer catheter;
Strong thread;
Branch resembling the letter Y;
Scissors, knife;
A small piece of leather.

We clean the finished branch from the bark. You can do this with a knife or take sandpaper.
We get rid of existing moisture using a microwave, after wrapping it with cloth or drying it for about a month, if there is time for this.
We cut small transverse grooves in the upper axis of the branch.
We tie each end of the catheter with a thick thread to two holes.
From the leather we cut out the required leather jacket shape.
Make holes on the sides and attach the ends of the catheter to them. We fasten tightly with thread.

To ensure maximum flight power, it is recommended to hold the slingshot vertically. Make the balls the same, of the same weight, so that you know the approximate footage from the shore. The elastic band should be pulled as tight as possible.

They say that even a stick shoots once a year, so take the slingshot seriously. Use it for its intended purpose, namely: to hit objects to develop accuracy, for game, for feeding and for helping with housework.

Slingshots are small multifunctional throwing devices. For many years They are used for a variety of purposes, ranging from hunting to accuracy games. Slingshots can vary in size and design, as they can be made from a number of various materials. However, all slingshots have common features: A strong frame, rubber bands and projectiles that are sent flying when the rubber band is pulled and released.

Steps

Classic wooden slingshot

Find a strong Y-shaped spear. Pay attention to the branches lying on the ground that can be broken off or trimmed to the desired shape. Branches from almost any tree will work for your slingshot, as long as they are strong enough to hold their shape when you pull your slingshot. However, for convenience and simplicity, it is best to use a spear about 15–20 cm long with branches 2.5–5 cm thick.

Look for branches on the ground in a wooded area. There you will have a noticeably greater choice among suitable materials.
If you prudently remove the flaking raw or mossy bark from the slingshot, you will get a slingshot that will be more convenient to hold in your hands.

Dry the spear. Hang the found branch over a heat source, such as a fire or burner, and turn it over periodically. Dry the branch for several hours. As it warms up, excess moisture will gradually come out of the branch. This is necessary so that the slingshot bends less at the time of the shot.

Make grooves at both ends of the fork. Take a pocketknife or a sharp stone and scrape out shallow circular grooves at the ends of the spear. Each groove should be located about 2.5 cm from the ends of the forks. The grooves will ensure reliable fastening of the rubber bands (weights) with which you will shoot.
- If you make the grooves too high, the pressure of the stretched rubber band may cause the slingshot to break. If you make them too low, then the shells you shoot may constantly cling to the base of the fork.
Cut the elastic band for the slingshot weights. Any thick, springy material you have on hand can make an effective throwing mechanism. Thick rubber bands or strips of latex and even medical tourniquets are all great options for making a fairly powerful slingshot. Having selected the appropriate material, fold it in half and cut it to get two identical ties. Each string should approximately correspond in length to the length of the fork of the slingshot.
- The specific length of the draw weight will depend on your preferred shooting style, as well as the materials you are working with. Shorter pulls will allow you to make more powerful shots, but it will be more difficult to draw the slingshot.
- Longer strings will allow you to adjust the slingshot to your liking or even completely redo it if you make a mistake somewhere.
Attach the heavy ropes to the spear. Take one of the two strings and wrap the end around one of the grooves on the slingshot that you prepared earlier. Tie the tie securely in this place. Do the same with the second weight. Trim the tied ends of the strings shorter so that they do not get in the way. Your homemade slingshot is almost ready!
- To ensure that the slingshot shoots accurately, make sure that its lengths are as equal as possible. Otherwise, your weapon will turn out skewed.
- Check the tension knots for strength. If one of them comes undone at the moment of firing, the slingshot can whip your arms quite painfully.
Make a skin. Take a piece of durable material and cut a strip about 10 cm long and 5 cm wide from it. At a distance of about 1.5 cm from the ends of the strip, make holes through which the free ends of the ties can be threaded. The resulting skin will serve as a nest for your shells, in which they will sit securely immediately before the shot.
- It is best to use durable material having some resistance, such as leather or thick burlap.
- To make holes in the skin, use the tip of a pocketknife or similar object. You can also simply make slits in the material, but they can break after just a few shots from the slingshot.
Tie the skins to the ties. Insert the free end of one string into one of the holes on the leather cover. Tie a knot at the outer edge of the leatherette. Repeat the same with the second weight. Now the slingshot trigger is a single unit and consists of a skin in the center and two weights attached to its ends.

Piston slingshot made of cardboard tubes

Make a longitudinal cut on a cardboard toilet paper tube. Take scissors and cut the toilet paper tube on one side so that it can be unrolled into a sheet. You only need to make one cut, as the tube should remain an intact sheet piece.
Roll the cardboard into a narrower tube and secure with tape. Place the edges of the cut cardboard tubes on top of each other, and then roll it up the way people usually roll newspapers. As a result, the tube should become half the diameter it was before. Wrap a long piece of tape around it to secure it, leaving only an inch of cardboard sticking out at one end.
- This part will serve as the internal piston of the slingshot, which you will use to launch projectiles.
- The inside diameter of the tube should be small enough to hit the projectiles you intend to shoot without allowing them to slip through. It will be helpful to compare the dimensions of these parts before you tape the tube together. If it is too wide, twist it a little tighter to get the right size.
Make two holes on opposite sides of one end of the tube. These two holes should be large enough to fit a pencil. Place them at one end of the tube strictly opposite each other, and not at opposite ends. In order not to skew the holes relative to each other, it will be more convenient to look at the tube from above.
- To carefully punch holes, use a hand-held single hole punch. But if you don't have a hole punch, you can make holes with scissors or the tip of a pencil.
Insert a pencil into the holes of the cardboard tube. Insert a pencil into one hole of the piston and out the other. Place the pencil exactly in the middle. To do this, adjust it until the ends of the pencil of equal length stick out on both sides of the tube.
- It's best to use a short, thick pencil, as you'll be less likely to accidentally break it.
- Be careful not to damage the holes in the cardboard when inserting the pencil. They should only be large enough to accommodate a pencil. If one of the holes breaks, rotate the tube and make two new holes in it.
Take the second whole toilet paper tube and make a series of cuts on it. Use a pencil to draw two vertical lines 1.5 cm deep from one end of the tube. Leave a finger-width of space between them. Turn the tube and make two more similar marks on the opposite side of the same end. Then take your scissors and carefully cut the cardboard along the marks.
- This tube will be the outer cylinder of the piston slingshot, housing the thinner piston you made first.
Hook a money rubber band on both sides of the tube. Hook the elastic bands over the paired cuts, lowering them to the very bottom of these cuts. In order for this type of slingshot to shoot properly, you will need to use an elastic band on both sides.
- You will achieve the best results if you take two identical rubber bands. If you don't have much choice, try to check that the rubber bands you use are the same size and thickness.

Once upon a time, hunting was one of the main human activities. Successful results provided people not only with food, but also with clothes, shoes and even jewelry. In our time, commercial hunting has practically disappeared, and now it is more of a hobby. Expensive, requiring not only desire, but also certain skills. Weapons and devices have been invented in such a quantity and of such quality that the hunter often only has to aim and pull the trigger. But real professionals do not recognize such tactics. Some of them also disapprove of this type of weapon such as a slingshot for hunting, considering it ineffective. However, this statement is controversial and to understand who is right, we should take a closer look at this ancient weapon.

No man needs to explain what a slingshot looks like. A homemade slingshot, made from scrap materials, has been in the hands of almost every boy. But it still doesn’t hurt to remember. Moreover, modern hunting slingshots have undergone some improvements, and manufacturers no longer use forked branches specially spotted on a particular tree. Although the principle remained unchanged.

So, a slingshot for hunting consists of three main parts:

The base, which simultaneously serves as a handle and a place for attaching the harness.
Tourniquet. Power and range depend on its elasticity and resilience.
Kozhetok. A specially selected piece of tanned leather into which the projectile is inserted.

Previously, the process of making a slingshot began with finding a suitable branch. The type of wood also mattered. Oak, ash, cherry or apple trees were best suited for this purpose. A dense forked branch was tied with twine and left for a while so that it accepted the required form. Only after this the blank for the slingshot was cut off. They removed the bark from it, polished it and burned it.

A multi-layer elastic cord was attached to the upper ends, in the middle of which a leatherette was attached - a small piece of tanned leather. Then the slingshot had to be shot, because it is impossible to make products identical in strength, range, accuracy and lethality.

IN modern models other materials are used. More durable and flexible.

Shooting principle

A projectile is placed in the skin. The tourniquet is stretched too much. The distance of the target in this case does not play a role. The projectile must receive maximum charge kinetic energy. Not only the power, but also the accuracy of the shot depends on this. Aiming is in progress. Then the skin is sharply released, the tourniquet instantly contracts and sends a projectile. In this case, the speed can reach 70-90 m/s, and the range is 200-250 meters. These indicators do not apply to all types of slingshots. Everything will depend on the material from which it is made, the design features and the type of projectile.

Ammunition

There's not too much variety here. But after many years and even centuries practical exercises, three types of projectiles for hunting slingshots were selected:

Plastic balls of various weights and sizes. They are not very effective for hunting, or more precisely, they are too light, but they are ideal for training.
Metal buckshot and shot. These are just combat options.
And, of course, small-sized and suitable-shaped pebbles. This type of shell can be easily found right on the spot.

Advantages and Disadvantages

The debate on this topic will never subside. Some consider a slingshot to be an ideal weapon for hunting. Others, on the contrary, do not compare it with the same bow or hunting crossbow. And there’s nothing to say about a good branded gun or carbine. However, it's not that simple.

The undeniable advantages of the slingshot:

Can be used under any circumstances. Even if you went into the forest to pick mushrooms or go fishing in the river, you can make a targeted shot at any time.
Having certain skills, preparing for a shot takes only a few seconds. Which, coupled with noiselessness, makes it possible for a second attempt to hit the target if the first was unsuccessful.
The slingshot is easy to carry and even with a supply of shells it is quite light.
Relatively high power. There are slingshots whose destructive power reaches 70 meters or more. Of course, it can’t be compared with a gun, but in a dense forest sometimes there are only ten meters left.
Silence.
And the last argument is cheapness.

What other arguments could there be that speak in favor of a hunting slingshot? They certainly exist, as well as disadvantages:

To learn how to properly and successfully use a slingshot for hunting, you will need many days of training.
Large game is not available for this type of weapon, although cases of wild boars have been reported.
No matter how high-quality the harness is, its service life is very limited.
Not a long aiming range. This point was also noted in the merits, so it all depends on the circumstances in which the slingshot is used.

After considering both lists and deciding what outweighs the advantages or disadvantages, you will have to make a choice: will you take the slingshot into service and go hunting for hares, squirrels and other small game. Or will you prefer a more lethal weapon, which will provide the opportunity to kill a larger animal.

Correct shooting technique

This concept includes two components: aiming and the hunter's stance. By mastering both correctly, you can achieve amazing results. Experienced hunters are able to hit a target that is not standing still. And it’s also not uncommon to shoot while you’re on the move.

In this light, two aiming techniques are worth considering.

Instinctive shooting

This method is based more on imagination and feelings, although it does not abolish the laws of physics. Aiming is done with both eyes, and the slingshot is controlled by sensations, because it is completely outside of direct gaze. When the hunter feels that the direction of fire has been chosen correctly, by lowering his hand with the leatherette clamped in his fingers, the trajectory and flight range of the projectile is adjusted.

The undoubted advantage of this aiming method is that the shooter does not care which eye he sees better. But the disadvantages include two facts:

If a hunter is poorly able to imagine the trajectory of a projectile, he is unlikely to achieve any success. This is the very imagination on which the method is based.
The second is the fact that after replacing a worn out harness, you will have to spend some time shooting.

Mastering this method requires long training. But having mastered it, the hunter is unlikely to leave the forest without trophies.

Aiming with an eye

Installing a landmark on a slingshot for hunting can significantly increase the efficiency and accuracy of shooting even for an inexperienced shooter. But there are some nuances here:

You will have to aim with one eye, the one that is sharper.
The reference point should be set slightly to the side, since the hand with the skin will be in close proximity to the face, and this fact can negatively affect accuracy.
When choosing a reference overlay, you need to ensure that it matches your individual color sensibilities.

The essence of aiming with an eye comes down to the following: three points must be lined up on one line. Eye, sight and target. The flight range is determined in the same way as in the previous method.

A well-made and individually adjusted eye gauge can be easily used with several types of slingshots, simply moving it from one to another, which can significantly improve hunting results.

Hunter Stance

When hunting with a slingshot, sometimes there is no time left to take the correct stance. Find support for your feet, fall on one knee, or vice versa, straighten up. All these movements in the forest, where any movement means danger for the animal, can scare away the prey, and you will have to spend some more time searching for it. Therefore, the hunter’s stance comes down to two concepts, from which the method of aiming follows.

On the move. Experienced shooters advise not to try to keep the sight exactly on the target while moving. It is almost impossible to do this, and by and large not required. The sight can move along a certain trajectory, perfect example which will be the infinity sign - a figure eight falling on its side. The junction of the imaginary lines will be the aiming point. As soon as the shooter feels that the movements have converged at this point, and it, in turn, coincides with the target, a shot is fired. "Infinity" is not the only option. The trajectory of the sight should be selected individually.
Fixed aiming. At first glance, nothing complicated. Point the sight at the target, make sure that all three points coincide and release the skin. But there are subtleties here too. Learning to hold a tense slingshot straight throughout the entire time of sight is not easy. And one more thing: between the moment when the sight found the target and the shot, the delay should be 5, maximum 7 seconds. In the forest when hunting, this method is rarely used, since you can’t sit in an ambush with a slingshot, so this method of aiming is more suitable for sports competitions and shooting.

In general, there are nuances. However, having mastered all these skills, you can safely take the slingshot into service.

How to make a slingshot for hunting with your own hands

The hunting equipment store offers a fairly wide selection of slingshots, but remembering your childhood and making one yourself is also not difficult. To do this you will need a very small set of materials and tools:

Suitable piece of branch. Can be replaced with a plastic or metal part.
Rubber or special harness.
A piece of tanned leather.
Jigsaw.
Drill.
Scissors.
Sandpaper.

The algorithm of actions is still the same as in a cheerful, happy childhood.

A carefully selected horned branch should be cleared of bark and treated with sandpaper.
On each horn of the sighting part, approximately two centimeters below the ends, remove the annular chamfer under the elastic band.
The elastic is wrapped around the antlers, tied in knots, and the knots are wrapped with thread.
The center of the elastic is measured and cut.
In a piece of leather selected for the leather, holes are made along the edges.
The ends of the elastic are passed through these holes and tied with a knot.

The homemade slingshot is ready and no drawings are needed. The main thing is that the ends of the elastic bands are the same in length, otherwise the skin will be shifted to one side. All that remains is to select suitable shells and start shooting.

Review of several popular models

But let's go back to the store. Choose a truly high-quality slingshot for hunting, and one that is also strong, accurate and durable, to an inexperienced person quite difficult. Therefore, here are a couple of the most popular models:

Model FS-1 from Truemark. Very light. The kit includes a clip for shells. Removable hand rest. Designed almost 50 years ago, it is still one of the best-selling models.
Survival Slingshot Archer Complete. Purely hunting model. The kit includes a flashlight. Arrows can be used.
The so-called fighting slingshot. Collapsible model made of anodized aluminum. There is a large scatter when shooting, since the sighting part is too wide.
The base is made of aircraft aluminum, which makes it lightweight. Due to thin rubber, the accuracy of hitting the target is increased.

The list is far from complete, but the listed models are enough to understand that finding a slingshot to suit your needs will not be difficult.

Safety precautions

Shooting, no matter where or what it is made of, is quite dangerous. Especially when the view is blocked tightly standing trees, low bush or peeking out from behind a cloud sunbeam. Therefore, it is necessary to observe safety precautions when hunting.

The first danger is ricochet. A projectile from a slingshot flies very quickly and can change its trajectory, hitting a stone, a tree trunk, or just a thick branch.
When shooting a slingshot, you must wear safety glasses.
Carefully monitor what is on the projectile’s flight path and, especially in the immediate vicinity of the target.
And never aim at an animal unless you intend to shoot.

This is where we can finish the review of this familiar and at the same time such an unusual weapon for hunting. Good luck in the fishing.

Slingshots are the most versatile weapons of all. If done correctly, you can even use it to hunt small game, although the main purpose of a slingshot is usually to shoot at targets for fun. So how to make a slingshot?

How to make a slingshot for outdoor shooting (video tutorial)

Find a suitable "Y" shaped branch. The dimensions of such a branch should be approximately 15-20 cm in length. You can remove the peel from the branch and wrap it with electrical tape to make it easier to hold the slingshot.

Dry the branch. To do this, you need to wrap the torn stick in a towel and put it in. It is necessary to dry the future slingshot when high temperature at intervals of 30 seconds. After all the liquid has come out of the stick, you can move on to the next step.

Make notches. Using sharp knife make a notch on each “finger” of the branch. The notches should be approximately 2.5 cm from the ends of the branches.

Cut off the rubber medical tubing. It is best to use a rubber tube with a diameter of approximately 80 mm. First, think about how long you want your pull to be. Once you have the length figured out, double it and cut it so you have two tubes the same length.

Attach the tube to the ends of the stick on the notches. This can be easily done using regular dental floss. Tie it tightly so that after the first shot your slingshot does not break.

Make a skin. You can make it yourself or buy a ready-made rectangular piece of leather or any other similar strong fabric. This piece should be approximately 10 cm wide and 5 cm high.