What does the sign for the end of the main road look like? Main road direction sign

Practice shows that the designation main road only reduces the number of accidents - many drivers do not understand how to determine the priority of certain road users or make gross mistakes in this area of the rules. The result is large-scale accidents, which are aggravated by their unpredictability - the injured party rarely expects that they will not give way. Therefore, any of us needs to know how to determine where the main road is. At the same time, it is necessary to understand that they are not always installed at intersections, and you need to be able to quickly find the answer to the question of who has priority even in the most difficult situations.

How to find your way on the road?

Basic regulatory signs

An indication of movement on the main road is the sign marked in the Rules with number 2.1. It is unique in its own way - this symbol is the only one in the shape of a diamond, which allows it to be recognized even from the back, excessive dust, or fading under direct sunlight. In addition, the “Main Road” sign is distinguished by the use of a bright yellow color, bordered by a white stripe of small thickness, which makes it possible to unmistakably recognize it at any time. climatic conditions and any current road conditions. According to the requirements of current standards, the preferred location for installing such a symbol is a ready-made or specially organized support located on the right side of the road just above the eye level of the person driving. Therefore, when approaching an intersection, first look to the right side - if there is no main road sign there, it is also worth looking to the left and ahead, as well as up the center, where it may be placed in exceptional conditions.

The “Main Road” sign cannot be confused with any other

On secondary transport routes, warning symbols are installed that belong to the special designation number 2.4 in the Rules. They have a similar feature to the main road sign - a unique shape that is an equilateral triangle, set with the apex down. Similar feature also regardless of any circumstances. The triangle is white in color and contains a wide border of a bright red hue. In some cases, a sign with number 2.5 is also used, containing the white inscription “STOP” in a red equilateral octagon - unlike the previous one, it does not simply establish priority, but prohibits without decelerating to a complete stop.

Additional designations

According to the standards of road transport construction and infrastructure organization, the “Main Road” outside a populated area can be replaced by one of the designations related to numbers from 2.3.1 to 2.3.7. They warn drivers that a secondary route is adjacent to this route, which allows them to ensure that priority is maintained before passing a certain section. Confused in various options There are no signs indicating the main road - the priority direction is always indicated in the center with a thick stripe, and those adjacent to it - with thinner lines on different sides.

Instead of the “Main Road” sign, signs warning of the junction of a secondary road may be used

Under the priority road sign or the instruction to give priority to another participant, there may be a large white plate with black markings referring to number 8.13 in accordance with the current Rules. It indicates which particular road is the main one relative to the current location, and helps to quickly determine the order of movement. It is worth remembering that the main road on the auxiliary sign is always indicated by a bold line, while secondary roads that do not have priority are indicated by thin lines. An additional sign is required when three or more paths intersect or when the direction of the main road changes.

Traffic rules

Seeing this sign in front of you, you must understand that you have priority over traffic moving in a different direction. If such a sign is installed at an intersection, but no explanatory signs are provided, you should understand that the main road is the one leading straight. If sign 8.13 is present, just mentally place it in the center of the intersection and evaluate what status your path has and whether you have priority over other vehicles.

It is worth noting that The effect of the “Main Road” sign applies equally to all participants on it. Sometimes, as a result of this misunderstanding, tragic situations- the reason most often becomes the reluctance of a person who continues to follow the main road to give way to someone who is leaving it. It should be clarified that in such circumstances it is necessary to apply other rules - in particular, it is worth remembering the interference on the right, and giving an advantage to the one who falls under this definition. However, this does not at all apply to those who enter the main road from a secondary one - they are forced to let through all transport that has priority and only then continue moving.

There are also cases when a sign loses its power. An example of this is the placement at an intersection or the appearance of a traffic controller in the prescribed uniform and with the appropriate insignia. In this case, it is necessary to use exclusively their signals to determine the degree of priority of a particular vehicle. If the traffic light is completely turned off or is in warning mode (flashing yellow light), the existing main road sign is used.

Video about what a driver should know about the “Main Road” sign:

Under no circumstances should you think that the main road sign is establishing. If the infrastructure includes appropriate markings and other markings, standard rules should be followed. In particular, a controlled intersection requires you to pay attention to the traffic light signal or the traffic controller’s gestures, while the rest require you to unconditionally let such traffic participants through.

Therefore, when approaching a secondary road, try to slow down at least a little and concentrate your attention on the vehicles moving along it. It is also advisable to place your foot on the brake pedal to significantly reduce reaction time and reduce the severity of the consequences. Of course, even the next person on the main road will be right, but is the time, effort and health worth it?

Movement priority

The basic rule regarding the main road is that those traveling in the direction indicated by the sign have priority. However, you should remember such nuances as the need to comply with other rules, including priority for the vehicle located on the right, as well as regulations regarding maneuvering. On unsigned roads, the main road can be difficult to find, but you can manage it if you pay attention to the surface and the purpose of the path. In addition, be careful even when driving along the main road - .

The main road sign belongs to the priority category. As a rule, it is installed at intersections to indicate the main road. Many drivers find it difficult to understand the principles of operation of this sign and determine its boundaries. Availability driver's license does not yet indicate the motorist’s ability to understand situations on the road and make decisions. Let's learn how to recognize main road signs, what they mean and how to follow them correctly.

Since the road sign indicating the main road is in the group of priority ones, it would be useful to understand what their essence is. The group is relatively small, but at the same time it has no less importance in traffic rules than a warning one.

Which signs are priority:

Main road – defines the area where the right of way is provided. Used at intersections without regulation.
End of main road sign – used to indicate the end of the main road.
Intersection with a minor road – informs you about the intersection of your road with a minor road at the next intersection.
Junction of a secondary road - its meaning coincides with the previous sign. The difference lies in the adjoining of the road to yours from one of the directions.
Give way - do not interfere with the movement of motorists moving on the main road.
Driving without stopping is prohibited - analogous to the sign of giving way. Requires you to stop before crossing an intersection.
The advantage of oncoming traffic is that it is installed on narrow parts of roads. The sign requires you to give way to motorists in the oncoming lane.
Advantage over oncoming traffic, on the contrary, provides the right of passage on a narrowed road. But if oncoming cars have already entered the lane, you need to let them pass.

Now let's take a closer look at what a secondary and main road is, and how to understand the sign that marks it.

The “main road” is manufactured in accordance with GOST and has the appearance of a yellow diamond. The borders of the diamond are made in white and have the same width. Outwardly, it is known to many people, as it is quite common in cities.

This is what the picture of the “Main Road” sign looks like:

When placing a main road sign, the distance to where the action begins is taken into account. This means that it is placed immediately before the intersection with the main road.

The repetition of signs before subsequent intersections is due to the actions of signs indicating a yield, intersection or junction. They are installed in front of the exit point from adjacent streets. They do not indicate priority, but only ask to give way. The main sign is duplicated in order to supplement information about the road.

Instead of repeating a priority road sign, a junction sign is often used. It is placed at some distance from the intersection. That is why this combination is more often used outside settlements.

By the way, within the city limits there must be a duplication of the “Main Road” at every intersection. This is due to the coverage area that is listed at the installation location. If the sign is located behind the intersection, then it is valid throughout the journey. The end of the main road is indicated by a corresponding sign (2.2). But we must remember that this does not make the road secondary. Only the intersection of equivalent roads is determined.

The concept of a main road is established by the definition of traffic rules. According to the law, the main road is a section of the roadway on which priority of passage is established relative to secondary roads. A secondary road is a road adjacent to or intersecting the main one. These are all kinds of access routes, alleys, driveways and other routes.

As a rule, the main road is marked with specially designated road signs. And also the main part is the part that has a hard coating in relation to the primer.

A priority sign installed in front of an intersection gives the right of priority passage only at that intersection. It is often duplicated at subsequent intersections. Therefore, to determine the coverage area, another sign is installed - a crossed out yellow diamond, which means that the main road ends, but it is not placed in every case.

When there is an intersection after a crossed out sign, according to the rules it is considered equivalent. In this case, the right of passage is determined by an obstacle on the right or by the surface of the road surface. If the road is covered with asphalt and wide, it is the main one, and if it is covered with a primer, then the driver must give way when driving along it.

The end of the main road sign, combined with a yield sign, means that the motorist is obliged to allow other drivers to pass.

It is known that priority signs cannot prohibit any actions by drivers, but only indicate who has priority when driving through uncontrolled intersections. But the main road sign, installed outside populated areas, prohibits standing on this section. That is, you cannot stop in the middle of the highway for personal needs, the only exception being emergency situations. In case of violation you will receive administrative punishment. Therefore, wait until parking spots appear on the way and park calmly.

It is possible to install a sign together with a sign indicating the direction. This is done where equal and unequal intersections intersect. This combination also regulates the movement of pedestrians and is installed along with the sign pedestrian crossing. When approaching such intersections, you must slow down in advance and be more careful. The absence of a direction sign indicates the straightness of the road.

Many drivers find it difficult to organize their actions when changing direction. The fact is that when they see a sign defining the main road, they assume the right of way. But what to do in a situation where two motorists standing different sides crossroads believe that they have the right to pass?

How to act when changing the direction of the main road at an intersection:

When moving, think not only about yourself, but also about other motorists. Take a closer look at the addition - plate 8.13, indicating the direction.
Visually position the sign in the center of the intersection, then you will see that the wide stripe shows the priority road, and the narrow stripes show the secondary one.
Having excluded the thin stripes “in your head”, keep in mind only main part. Then the second participant in the movement and you will act according to the rule of interference on the right. The one who has no obstacle starts the movement.

In the same way, you can mentally divide the site into two halves for travel.

You can only move at a roundabout intersection in a counterclockwise direction. It is indicated by a blue circle with arrows. There are dividing stripes on the ring. Additionally, the area is regulated by other signs, for example, or “driving without stopping is prohibited.” This combination of symbols indicates that the driver already in the circular lane has the advantage.

Sometimes the above signs are supplemented with a yellow diamond - indicating the main road. It is placed along with a direction sign. It depicts the entire ring or part of it, indicating where the priority road begins its operation.

The part of the circle shown on the sign must be remembered, because this is where the main road ends and the driver at the intersection gives way to those entering, according to the rule of interference on the right.

If the intersection is controlled, this greatly simplifies the driving process. Installed traffic light It works the same as at a regular intersection - red prohibits, green allows through.

The main thing is, when entering the roundabout, decide in advance which lane you will occupy. It depends on which direction you plan to leave the intersection. The traffic rules establish the entry rule - from any lane of the adjacent road.

Conditions for selecting the correct band:

if you are going to leave the circle to the right or move straight, choose the lane on the right edge;
if you plan to make a left turn from a roundabout or turn around reverse side– take the lane on the left;
when the number of lanes is three or more, the lanes in the center are occupied when moving through the ring along a straight path.

It is a mistaken belief that you need to turn left when entering the roundabout. It is required to use the right one not only when entering, but also when leaving. A left turn signal is only required when changing lanes or making a U-turn. Turning on the turn signals is not required when crossing the ring.

Remember that any violation of traffic rules is subject to appropriate punishment. Violation of the requirements of a main road sign and failure to provide an advantage to other road users faces a fine under the Code of Administrative Offenses of the Russian Federation in the amount of 1,000 rubles.

If the traffic police officers on duty notice such a violation, they will certainly draw up a report on you. It is good if this maneuver does not lead to the creation of a dangerous or emergency situation. Then the penalty may become larger, and this is in addition to the costs incurred in the event of a possible accident.

Such violations are more likely to lead to an accident. Therefore, before driving along the main road, you need to make sure that other participants give way to you from all adjacent roads. This is the only way to avoid a collision and pass through the intersection unhindered.

Even when you follow the rules and move in the right direction, it is important to remember that a motorist driving on the secondary road could easily make a mistake or not know the rules at all. You need to be completely sure that they have given way to you and only then continue moving.

Only responsibility and a sober mind will allow you to drive a car safely. The main thing is not to forget that there are other traffic participants who, in turn, can ignore road signs.

Nuances

Drivers often have different opinions about driving under the “Main Road” sign. This is due to the fact that each specific situation is assessed in its own way.

For example, some motorists believe that the sign is only valid until the nearest intersection unless it is followed by a duplicate. It is difficult to determine whether this is true or not. Based on practice, the priority part of the road ends at the intersection at the place where a separate sign indicating the priority of traffic is installed. But the rules say that without clarifying designations it does not cease its action and continues in the direction of the intersection.

Remember that the “Main Road” sign is installed mainly on unregulated parts of the road, and if there is a traffic light, it stops working.

There are cases when, instead of a sign, a red triangle is placed. Moreover, this is a fairly common situation. The driver must be able to “read” additional signs and identify secondary and main roads.

In the rules, these clarifying signs have certain serial numbers(2.3.2. – 2.3.7). Remember them and study them in detail so that in the future there are no incomprehensible situations in the process of determining the advantage on roads. It doesn’t take long to study them and it’s not difficult, but you will avoid fines for violating road signs.

Violated very often. Sometimes through negligence, sometimes on purpose. In order not to run into trouble again, you will have to learn all the rules that you can. And signs indicating certain restrictions, including. It's actually not that difficult. What is this "Main Road" sign? How does it work? What will happen to the driver for violation?

Appearance

First, a little about how exactly it is depicted this sign. Fortunately, he doesn't have anything difficult to remember. There are no elements that could cause difficulties.

The thing is that the "Main Road" sign is a yellow diamond with a white frame. It is not prohibitive or permissive. Although, for violating the rules associated with the main road, certain penalties will be imposed on the driver. The sign helps show which people have an advantage when driving on unregulated areas.

Where do they put it?

It is worth paying attention to the location of the pointer. The "Main Road" sign is installed only at the beginning of the path. Practice shows that most often there are additional signs underneath. These are original signs that limit the action of the sign.

It is impossible to see this pillar in the center of the road or at the very end. After all, as we have already found out, the “Main Road” sign serves to regulate traffic in a particular area. It makes no sense to put this kind of pointer at the end.

Coverage area

Very interesting point, which has a "Main Road" sign, is an action. It is not quite ordinary and is a little different from most road signs. What exactly? What should you pay attention to?

The whole problem is that the “Main Road” sign is valid until the very end of the highway. Of course, if there are no additional signs and clarifications under it. It should be noted that the action does not stop at intersections. In this case, the sign works in the direction of traffic in a straight line. Everything is easy and simple. And the “Main Road” sign, whose coverage area extends to the entire area, does not allow turns and U-turns.

But there are also some restrictions. They are also worth paying attention to. As already mentioned, they are indicated under the sign, or the action is terminated by installing a separate pillar with a sign.

End of the main road

How can you tell when the main road has ended? For example, look at the pillars with signs. There you can often see the "End of the main road" sign. It begins its action at the installation site and extends to the new pointer.

The "End of the Main Road" looks almost the same as its beginning. It is a yellow diamond with a white border. But in this case, to indicate the end of dominance, 4 diagonal black lines will be drawn in the direction from right to left. They seem to cross out the "Main Road" sign. This kind of sign is installed in those places where the yellow diamond action needs to be stopped. At the beginning of the road you will never see a post with an "End" sign. If this happens, record it - this action is a direct violation of the rules traffic. Information should be provided to the traffic police for further elimination of errors.

Movement

In the article you can see the "Main Road" sign (photo). With the direction to the right or in any other direction, this sign is installed very often. What does it mean? It’s not so difficult to decide here.

If you see an additional white sign with a turn under the “Main Road”, know that there is a rule in this direction. That is, the thick line (stripe) in the image shows how you can continue to move along the main road.

Most often, these kinds of signs are placed at intersections. To make it clear: the effect of the sign extends in the selected direction. But in others - no. This rule should be known to all drivers. Otherwise, you may run into some trouble.

Parking

The "Main Road" sign, the photo of which will allow you to learn it, has a small peculiarity regarding the rules of parking and stopping. Although there are no additional signs indicating this, drivers are not allowed to pause on the main road.

There is a penalty for violation. But in areas not related to the main road, you can park and stop easily. Of course, when there are no other signs with restrictions. Please note: this rule operates outside populated areas. That is, in cities you can still try to park in such a way as not to interfere with traffic. But outside of them - no.

There is an exception to the rule. This is a forced stop. Usually due to an accident or other road incident. In this case, you will have to initially prove your innocence. If it works out, you will avoid punishment, if not, you will need to settle accounts with the state in the manner prescribed by law.

Interrupt

The "Main Road" sign is valid up to the nearest limiting sign. There are some exceptions. More precisely, it is one. And your movement on the main road can be legally interrupted ahead of schedule.

In what cases does this behavior occur? If a vehicle with special signals crosses your path. This includes ambulances, fire trucks, emergency vehicles, police cars, and so on. In this case, you must give way to them. There is some punishment for violation. It’s not too serious, but it’s unlikely to go unpunished.

Priority

In some cases, the priority of traffic on the main road may not be entirely clear. But drivers have long known that there is a small rule for determining priorities in questionable areas.

Roads with a hard, even surface (asphalt, stone, concrete, etc.) are always the most important in relation to dirt roads. In this situation, drivers must give way to those driving on a “civilized” surface. For violation, special penalties will be applied to you. Not too harsh, because the “Main Road” sign does not prohibit or limit anything. It only serves as an additional means of regulating traffic. And this violation cannot be punished too harshly. But for accidents caused by failure to comply with the "Main Road" sign - quite.

Punishment

What can a driver face if he does not give way to a vehicle moving along the main road? To begin with, such a citizen must be caught and proven guilty. Usually there are no problems with this. And only then can punishment be judged.

The “Main Road” sign (traffic regulations emphasize that it does not prohibit anything) only regulates traffic in areas without traffic lights. The penalty in case of a corresponding violation is a fine. Plus a verbal warning that you need to follow the rules of behavior on the road.

How much should an inattentive driver who fails to give way pay? Only 1000 rubles. But this is on at the moment. The government is considering increasing this fine several times.

Popular opinion

Often among drivers there are very interesting opinions regarding traffic at intersections with the "Main Road" sign. After all, each specific situation will be assessed differently in the event of a violation.

So, for example, some people believe that the “Main Road” sign is only valid up to the nearest intersection, unless a “duplicate” is installed behind it. It is difficult to judge how true this statement is. After all, practice indicates that the main road usually ends at an intersection - a separate sign is installed there that shows the supremacy of traffic. Although the traffic rules indicate that without clarifying symbols, the action does not stop beyond the intersection and takes place in the direction of traffic.

Also, the indicator stops working when the first traffic light appears. Remember: the "Main Road" sign is installed solely to establish relations in unregulated areas. And as soon as traffic lights appear, its effect ceases.

Additional designations

Often under the “Main Road” sign you can see a white triangle with a red edge and some strange lines. Usually one of them is fatty and the other is thinner. These are additional signs that warn all drivers about the junction of a secondary road with the main one. The position is indicated by a thin black stripe. The priority road is marked in the center with a vertical thick line of a similar color.

Sometimes a red triangle is even used instead of the main "Main Road" sign. This is also quite a common occurrence. And using these additional signs, the driver must be able to identify the main road. And the secondary one too. In the road transport construction standards, such clarifying signs have their own serial numbers: from 2.3.2 to 2.3.7. Remember all this, and you will know exactly when you should give way to drivers, and when to give way to you. There is nothing supernatural about this. Remember that any violation will result in punishment. And problems with the law in the future can bring you a lot of inconvenience.

As practice shows, there are a number of signs that reduce the number of traffic accidents, one of such signs is “Main Road”. But, unfortunately, many motorists cannot determine the priority of certain areas of traffic or make mistakes. Such situations often end in emergency situations. In this regard, every road user must know where the main road is and how to identify it. But there are times when it is not always possible to find the appropriate signs at intersections, so even in difficult situations you need to know who has more priority.

Orientation on the road

Main adjustment signs

In rules 2.1 there is a sign indicating movement on the main road. This sign is quite rare; it can be recognized from any angle, even if it:

covered with snow;
covered in mud;
burned out in the sun.

The sign has the shape of a rhombus, is colored lightly yellow and is surrounded by a white border around the edges. This coloring helps to recognize it in any weather, as well as in different situations happening on the road. In accordance with the terms of the current standards, it is necessary to install this kind of sign on a ready-made support, which should be located at the edge of the road on the right side. So, when you approach an intersection, the very first thing you do is look carefully at the right side. If for some reason the sign is not there, be sure to look ahead, up, left and center, it could have been moved there except.

However, on some secondary roads you can see warning signs, which in the traffic rules belong to the designation 2.4. These symbols are very similar to the main road signs, both have the same shape of an equilateral triangle and are mounted with the apex down. This feature, in turn, also allows one to recognize the sign under different circumstances. The sign has a triangular shape, is painted white and has a wide border of bright red around the edges.

In many cases the sign 2.5 is still used. It has the shape of an octagon with the inscription STOP in white. This sign, compared to the one mentioned above, not only determines priority, but also does not allow you to cross the intersection without reducing speed until you stop.

Additional designations

In accordance with the standards of infrastructure organization, as well as RTS (road transport construction), the “Main Road” sign can sometimes be replaced with the following designations, which refer to numbers 2.3.1 - 2.3.7.

They inform motorists about the presence of a secondary route on this route and make it possible to maintain priority while crossing certain territory. There is no need to confuse the types of signs establishing the main road. The priority direction is always marked with a large stripe in the middle, but as for those adjacent to it, then with thin stripes on all sides.

Also under the main road sign you can often see a large white plate with black markings and referring to the number 8.13 in accordance with the rules. Using it, you can accurately determine the road, which is the main one in relation to the location of vehicles. She also contributes quick determination order of movement.

Always know that on the auxiliary sign, the main road is marked with a bold stripe, but on the auxiliary signs, which do not have the right of priority, with thin stripes. An auxiliary sign is required when three or more paths intersect and when the direction of travel on a main road changes.

Movement according to the rules

If there is such a sign in front of you, you must know that you have priority over vehicles traveling in the other direction. When there is such a sign at an intersection and there is no explanatory sign, you need to clearly understand that the road that leads exclusively straight is the main one. Having noticed the presence of sign 8.13, imagine it in the center of the intersection and evaluate your path, and think about whether you have priority over other vehicles.

It is also necessary to know that the influence of the “Main Road” sign concerns every motorist present on it. Very rarely, but unpleasant situations do occur due to misunderstandings. The reason for all this is the lack of desire on the part of a driver driving on the main road to give way to a person leaving it.

In this regard, in such situations, you should use other rules, and do not forget about the interference on the right. Priority is given to those who fall under this definition. This in no way applies to those drivers who enter the main road from a secondary one. Because they have to miss everything vehicles having an advantage, and only then continue their movement.

However, there are also situations when the sign loses its influence. For example, if there is a traffic light at the intersection or there is a traffic controller at it with all the appropriate insignia and in the required uniform. Then you should use only their signals to determine the degree of advantage of any transport. If the traffic light is not working, is turned off or the yellow lights are flashing, then adhere to the sign.

Don't think that a "Main Road" sign gives cars priority over pedestrians. Provided that the infrastructure has all the appropriate markings and, of course, designations, it is necessary to act in accordance with the rules. Often, at a controlled intersection, you should follow the traffic lights or the traffic controller, and all other signs oblige you to give way to the same motorists.

When a sign is located outside of town and designates a main road, it can determine both priority and restriction. In such areas, stopping is prohibited. First you need to wait for a road pocket or the first exit, which in any case is on the highways. However, there may be an exception, this is a stop due to an accident that occurred on the main road or another emergency. For such a violation, the traffic police inspector may issue you a fine, and to prevent this from happening, you will need to present him with strong evidence.

When the sign is missing

There are times when intersections are not provided with proper road signs, leading to confusion among novice motorists. It must always be remembered that the following have a secondary status:

1. Yard roads.

2. Access roads.

3. Technological paths of enterprises.

4. Driveways.

5. Lanes.

In addition to all this, a road that has a hard surface of any type has an advantage over dirt roads, and does not depend on their directions or sizes. The only exception can be established sign, indicating the advantage of the dirt road as the main one.

Sometimes on country roads the “Main Road” sign is not placed at all intersections. And therefore, the road will be of paramount importance until you come across the required sign, described in the rules under numbers 2.2. The reason for the end of the influence of the sign may be the passage of populated areas, as well as changes in the road surface. If the road surface is the same, you should adhere to the rule - obstacles on the right.

Wishes before practice

As we all already know, among motorists there are those who do not know the traffic rules or regularly or unintentionally violate them for some reason. When you go out on the road, you should always remember that unexpected situations may arise along the way and you should always be prepared to solve them. Very often, the “Main Road” sign cannot guarantee safe driving, since there may be a motorist who wants to enter the road without having priority. There are situations when there is not a completed exit, but only a failure to comply with the rules establishing the line for stopping. But this is quite enough for an accident to occur.

As a result, when approaching a secondary road, reduce the speed slightly and focus your attention on the vehicles moving along it. You can also place your foot next to the brake pedal, this will help change the outcome of the consequences. Only if it happens emergency, the one who moved along the main road will still be right.

Advantage of movement

As for the main road, the main rule is that motorists who drive in the correct direction have priority. But it is worth remembering that you must adhere to other rules, including the advantages of vehicles located on the right, as well as requirements regarding maneuvering. On roads that are not marked, it is very difficult to find the main road, but you can do it if you look at the surface or the purpose of the path. In addition, when driving along the main road, be careful and careful, because car owners do not always follow the rules.

The “Main Road” sign often raises many questions not only among beginners, but also among experienced drivers. It can be especially difficult to figure out where the road has its own direction. Or figure out where the coverage area of this sign ends.

Sign 2.1. Which section of the road does it represent?

It refers to those sources of information from which you can find out about priority. It is installed only on sections of the road that have priority over the roadway that crosses them. Usually they place it where there is no regulation at the intersection. Or where you can enter an intersection from such a road.

We can say that the sign itself helps you decide in what order you should drive through uncontrolled intersections. The presence of a traffic controller or traffic light means that the effect of the sign is canceled. Additionally, a special type of plate with the number 8.13 can be installed below. It will be possible to understand in which direction the main road goes.

Drivers need to know this to make it easier to determine the order in which a particular intersection is crossed.

Main road: about the appearance of the sign

A yellow diamond inside a white frame indicates the road on which you must yield to traffic. This type of sign is easily identified by its shape, even when viewed from the back. The shape has no analogues, so any driver will immediately guess what he sees in front of him. This will make it much easier to get through difficult sections of the road.

To make driving safer, you should listen to the advice of more experienced drivers. They advise slowing down when an intersection is visible. And then carefully examine the corner on the right. Is the sign missing? Then it’s worth looking at the corner closest to the driver. Then - to the one farthest from him. In this case, you will definitely come across at least some landmarks.

The sign is not installed. How do you know which road has priority?

Main road signs are installed at intersections in almost every locality. But sometimes you may encounter a situation where the sign is missing.

Then you should pay attention to the adjacent roads and the quality of the road surface. If some area has a harder surface than conventional soil materials, it will be a priority. The same can be said about the highway, which has exits from all nearby territories.

But the road will not become the main road in relation to the section that crosses it, even if there is a hard surface.

The sign and its installation locations

It is necessary to install road signs taking into account where their effect begins and ends. For example, you can install such a sign in front of an intersection, which will be covered by the sign.

The described priority sign must be repeated before all intersections. This must be taken into account so that there are no difficulties in understanding the signs “junction of a secondary road”, “intersection...”, “give way”. They are often found before leaving the side streets that adjoin the main one. They do not inform that the road being crossed becomes the main one. They just demand to give way. Sign 2.1. may be duplicated in order to supplement the information.

One of the varieties of the “Adjacent to the Main Road” sign can replace the “Main Road” double. But such a structure is not installed in front of the intersection itself. And at some distance. Therefore, in urban conditions it can be quite difficult to understand. That’s why this scheme is almost never used in populated areas. Most often - outside of it.

Sign "Main Road" - about the coverage area

The priority road goes exactly straight if there are no additional signs under the sign. Additional signs are installed if the direction does change.

It’s more difficult to plan your actions at intersections, where the main road changes direction. There are two types of problems you may encounter here. Intersections of unequal and equivalent types intersect with each other. Most drivers in such situations simply forget about the surrounding angles. And they think only about those signs that they can actually see.

How should a driver act if the direction of the main road changes at an intersection?

The main thing is not to forget about all sides. The direction in which the main road goes will be shown using sign 8.13.
Such a sign can be mentally placed in the center of the intersection. Two narrow lines will mark secondary roads, and a wide one will mark the main one.
You only need to remember about the main section, and simply throw the secondary ones out of your head. Then the main rule for further actions becomes “Interference on the right.”
If someone does not have such an obstacle, it is he who should start moving first.
First, all cars in the main area must move away. And only then are they followed by those on secondary roads.

Possible violations

Actions that violate the requirements of the sign are punished with a fine of 1,000 rubles. You can read about this in the Administrative Code of the Russian Federation, in article 12.13. A warning or a fine of 500 rubles is the punishment for driving without stopping where it was needed. This is the subject of article 12.16.

It is best to purchase special tables of fines yourself to make it easier to navigate the penalties for certain violations.

What other traffic rules are important to know about?

If the driver himself sees this sign in front of him, then he must understand that he has priority in this situation. The effect of the “Main Road” sign applies equally to everyone who stands behind it. That is why the “interference from the right” rule applies. If someone enters the main road from a secondary road, then it is necessary to give way to everyone who has priority. And only after this the movement can continue.

Sometimes this sign may lose its power. For example, when there is a traffic light at an intersection. Or if a traffic controller who has the appropriate insignia and uniform established by law enters the site. Then you only need to wait for a signal from these sources to understand who has priority and who does not. The existing main road sign can be used in cases where the traffic light is turned off or only flashes yellow.

But don’t think that because of this sign, cars have more advantages than pedestrians. You should follow the standard rules if you have the appropriate markings and infrastructure.

What about combinations with other signs?

If there are secondary transport routes, signs that belong to group 2.4 are installed on them. They also have a unique shape, only an equilateral triangle with the vertex at the bottom. Thanks to this, signs can be easily distinguished from other sources of information, regardless of the environment.

Wide border in bright red plus white- main design features. There are also signs with white STOP inscriptions, they are designated in the rules as 2.5. They are used not only to set priority, but also for individual requirements. According to which it will be prohibited to pass through a particular intersection without slowing down and stopping completely.

Outside populated areas there are alternative options, helping to replace the “Main Road” itself. These are signs with numbers from 2.3.1. up to 2.3.7. They say that a secondary road adjoins the path along which the driver is moving. This will help ensure that when passing through certain areas, the priority of this vehicle over others is fully maintained.

It is difficult to get confused in such designations. Only thick stripes indicate priority directions. If roads adjoin it, thin stripes are drawn on different sides.

And below, under the “Main Road” sign, there are white signs with the number 8.13 in the rules. Thanks to this, the order of movement is determined faster. The sign shows that in the current state of transport it remains a priority. The main road on auxiliary signs is always indicated with bold lines. If the road doesn't have priority, then it's just a fine line. If three or more roads intersect with each other in one area, it is necessary to use clarifying signs.

Automotive lawyer consultation:

Write! We are always happy to help you!