Painted glasses are rarely used in wedding ceremonies, but thanks to this they are now gaining popularity, because you can create any design with paints.

After exclusivity, the main advantage is that such decor cannot be accidentally disturbed, as happens with lace, rhinestones or ribbons. It does not deteriorate and does not fall off the glass, so the wine glasses have a long service life.

Depending on the execution technique, certain paints are used, which vary for each case. When the drawing is done in a mixed style, several types of materials are used.

The main types of paints used to decorate a glass:

1. Water-based acrylic (stained glass) paints acquire a muted glossy sheen when they harden, and when undiluted they give a slightly convex pattern. The picture on the glass takes a long time to dry; it may require firing to consolidate the result, but this method is dangerous for thin-walled wine glasses.
2. Solvent paints, also classified as stained glass paints, are based on varnish compositions, which is why they are more fluid and harden quickly. Therefore, to increase transparency, a special solution will be required. Pictures look good on glass, especially if the design does not involve a ribbed surface.
3. Contour paints are a thick mass placed in a tube with a sharp spout, made specifically for drawing thin lines.

To make the pattern convex, the manufacturers created a fairly dense texture. After all, it is used for drawing details or contours.

1. Techniques used to paint wedding glasses:
2. Dotted or confetti. The selected colors are applied with matches, toothpicks or cotton swabs, depending on the required diameter. In this case, acrylic paints are used to create the pattern.
3. Picture in stained glass style. This design creates a specific pattern using stained glass paints, after which, after drying, an outline is applied depicting lead or gilded bindings. To make the glass look like a real cathedral, the base paint should be slightly translucent, showing the passage of light rays through the picture.

This creates the feeling of a mosaic.

Stained glass paints are often used to create drawings, especially in an authentic style. And contour pictures are used to draw schematic pictures, or individual small details that should protrude above the surface.

How to decorate wedding glasses with your own hands: dot painting on glass The most in a simple way

, is a point decoration. To create it, you don’t need the ability to draw, and you don’t need a lot of time and resources.

• Materials:
• acrylic paints;
• cotton swabs, matches;
• disposable container, from 2-3 cm in diameter (can be made from foil);
• cotton pads or cloth;

alcohol or acetone. First, wash the glasses and let them dry. After this, the surface is further cleaned with a cotton swab dipped in alcohol.

When everything is done, the wine glass is turned upside down.

This method of preparation will remove all contaminants that could disturb the future decoration.

Paint of the selected color is poured into a disposable container. Having dipped a cotton swab into the paint, they begin to make dots from the very bottom of the bowl. The distance between them is approximately the same so that the decoration looks uniform. After completing the first row, the next one begins, while the pressure applied with the stick decreases - this method will produce smaller circles. When this ceases to work, they switch to painting with matches.

The higher the dots rise in the glass, the less common they are.

At the same time, they are arranged in a chaotic order. Sometimes they are made into curls or pyramids.

Stop placing dots 1.5-2 cm before the edge of the glass. This is done to prevent paint particles from getting into your mouth. The leg and stand are most often left clean.

But sometimes inscriptions are made on the stand using contour paints of the same shade.

When newlyweds want more variety, glass decorations are made from several colors.

This style of execution can look rude, just like the same mugs, so you need to monitor moderation in.

How to paint wedding wine glasses with an outline on glass - master class But at the same time, you need to try to create dots and lines on the paper so as not to spoil the workpiece.

For painting you will need:

• contour paints;
• masking tape;
• cotton pads and alcohol;
• stencil.

Glasses are cleaned and degreased with alcohol or acetone. After preparation, thin strips of tape are used to glue the stencil onto the bowl.

Take a tube of paint of the main color and begin to apply dots along the outline of the stencil. When the figure is completed, the adhesive tape is removed, and the gluing area is degreased with a cotton swab.

After the glass has dried from the alcohol, the boundary is closed and the next stage is started. Sometimes there is a more complex method of execution - drawing a solid line.

When the main figure is completed, dots begin to be drawn on the sides of the wine glass. At the same time, they try to different colors and the size of the circles were randomly distributed.

The dots gradually become smaller, leaving large gaps between them. At the same time, a clean strip the size of the main pattern is maintained at the back. This is done to make the glass look lighter and lighter.

DIY painting of wedding glasses with acrylic paints – tips and ideas

Painting is the most difficult way to create a design on glasses. This technique is only suitable for people with developed drawing skills.

, is a point decoration. To create it, you don’t need the ability to draw, and you don’t need a lot of time and resources.

• 2 plastic plates;
• 1 plastic glass (for washing);
• brushes;
• cotton buds;
• acrylic paints of the desired colors;
• cotton pads and degreaser.

The glasses are prepared for drawing and turned upside down. After this, water is poured into a glass, and paint is squeezed onto one of the plates. The second vessel will serve as a stand for wet brushes.

To draw the stamens, cotton swabs are dipped in paint and dots are randomly placed along the bottom of the glass. In this case, the colors and sizes of the circles should differ slightly. When the stamens are finished, they are left to dry for 2-3 hours.

Sometimes it is advised to bake paints to finish the job faster, but wedding glasses are fragile and can crack from high temperatures. Therefore, it is better to let the paint dry naturally.

After drying, draw the petals of the plant. They are made with a thick brush, and then the veins and details are drawn. When all the small elements are completed, the glass is again given time to harden.

The last step is decorating the stem of the glass. It is covered with green paint, depicting the stem of a plant.

This is the easiest way to create original glass. But if a person has great experience in drawing, he can make more complex plant designs on the bowl.

How to make painted glasses for a wedding yourself: templates, stencils with patterns

In this video you will learn in more detail about painting a wedding glass:

When there is a desire to create a complex design on wedding glasses, but there is no skill in working with paints and glass, ready-made sketches and stencils will help. After all, the principle of creating decor is to print and cut out the pattern, then apply it to the glass and paint over the voids.

Depending on the volume of the pattern on the stencil, different colors are chosen. For large ones, stained glass is used, and for small parts, an outline is used.

Self-painted wedding wine glasses will delight you during the holiday and from photographs, and with the correct application of paints, they can be placed as decoration in your future home. Sometimes the execution technique is so flawless that they are used on every marriage anniversary without losing their beauty.

In the old days, before the wedding, the bride was always tested to see if she could sew and embroider and keep the house in order. Nowadays, the requirements for brides have become much softer, but what girl would refuse to boast about her skills!

And one of the most successful ways to demonstrate good taste, as well as ingenuity, patience and perseverance, is to decorate wedding glasses with your own hands, turning them into real works of art.

Usually such things are carefully stored for for long years and taken out of the treasured box for the next wedding anniversary.

Preparation

Since the glasses are still supposed to be decorated by hand, you can buy the simplest glass wine glasses. Moreover, they do not even have to be of the same shape: for example, for the groom you can buy a thin, strict wine glass, and for the bride - a wider, squat one, imitating a female figure.

It is advisable to purchase at least six pieces: glassware tends to break at the most inopportune moment.

For the same reason, it is better to decorate not two glasses, but at least four, or even all six: two are intended for the newlyweds to take a sip of champagne at registration, two more will await the newlyweds in the restaurant, and the last two will serve as spare and can be used for a photo shoot.

You can literally decorate wedding glasses with anything: beads, beads, rhinestones, artificial pearls, lace, ribbons, artificial flowers, feathers.
And if you decide the same, then the glasses will need to be decorated in the appropriate style and color.

The most important thing is to thoroughly degrease the glass with alcohol or acetone before work, then wash it and rub it until shiny with a soft cloth.

How to decorate glasses for a wedding with lace?

The easiest way to decorate glasses is to carefully cover them with lace.

The style of the glass will depend on what lace you choose. White lace or lace with silver lurex thread looks elegant and solemn.

For Wedding in Tiffany style Turquoise lace is ideal.

If a wedding is planned in shabby chic or bohemian style, then colored ones would be quite appropriate: scarlet, purple, blue lace or lace with gold lurex.

Well, for the wedding in rustic style It is better to choose embossed lace in beige or cream colors.

You can glue lace using:

• glue gun;
• PVA glue;
• silicone glue;
• instant glue for ceramics and crystal;
• super glue (highly resistant instant glue.

Lace can be glued around the glass, stepping back a centimeter from the edge.

You just need to remember that instant adhesives contain substances that are unsafe for prolonged inhalation. Therefore, it is better to work in a ventilated area.

A lace “skirt” looks beautiful when placed on the leg of a tall wine glass. The combination of a lace “belt” on the glass itself and a lush, gathered lace frill on the base will also be very impressive.


If you use embossed lace of the Vologda type for decoration, then you can cut out individual elements (flowers) and stick them on the glass of the glass.

Lace is usually trimmed with beads or pearls. The stem of the wine glass can also be decorated with lace or satin braid.

For a richer design, you can combine lace with rhinestones.

Painting with paints

Used for painting glasses acrylic paints. To ensure that the design does not wear off or wash off, after application it should be carefully coated with a special varnish, which is sold in handicraft stores.

You can cover the edge of the glass with construction tape so that the edge of the tape protrudes slightly above the glass edge: this is done so that, when picking up the vessel, you do not smear the paint that has not yet dried. Then, using a sponge, the entire remaining free part of the glass is covered with a continuous layer of paint (usually gold or silver).
You can also use gold paint to outline designs or ornaments.

Look very elegant on wedding glasses monograms young or other drawings (doves, hearts).

To depict something truly spectacular on thin glass, you don’t have to have Raphael’s talent: just print the image you like on a printer, then glue it on the inside of the wine glass and trace it on the outside.

Decorating with artificial flowers

Artificial flowers can be glued to the surface of the glass or to its stem.

The composition looks beautiful when the stem of the wine glass is one solid flower, above which the reservoir rises. To create such beauty, it is enough to disassemble a large artificial flower(rose or peony), and then, row by row, cover the leg with them, starting from the top.

Each subsequent row of petals should be glued slightly lower than the previous one. The remaining free stem of the glass should be draped with green silk or guipure.

To make it even more impressive, you can glue several feathers of the same color as the petals between the petals.

Decoration with ribbons

There are many options for decorating wine glasses with ribbons - from very simple bows to complex compositions and draperies.

Satin, silk or gauze ribbons tied in the form of a bow on the stem of a glass look very elegant.

You can make artificial flowers from satin ribbons rolled in a special way. Such flowers are usually glued to the surface of the wine glass: small ones, made from narrow ribbons - closer to the edge, large ones, made from wide ribbons - at the base.

Petals of artificial flowers made from ribbons are embroidered with beads or pearls. Instead of stems, narrow green ribbons or threads are glued.

Decoration of wedding glasses with rhinestones

Rhinestones glued to them will add shine and solemnity to the glasses. Rhinestones that have the same shape as the stones with which the bride’s dress is embroidered will look especially impressive.

Rhinestones can be glued to the surface of the wine glass in a checkerboard pattern: closer to the edge - less often, near the stem - thicker. Rhinestones glued to the petals of artificial flowers imitate dew drops.

How to congratulate loved ones on their wedding day in an original way? It’s very simple – you just need to do it.

We offer beautiful inscriptions on wedding rings x and in different languages.

All about how the wedding ceremony takes place in Orthodox Church after reading our article.

A wedding celebration is not only about gorgeous looking, happy newlyweds, it is also about an unusually decorated table. The importance of the moment should be emphasized by absolutely everything, even the design of the dishes.

Decorating glasses for a wedding

Decorating wedding glasses: it’s time for business

A few ideas on how to decorate wedding glasses

Conclusion

Photo gallery - DIY wedding glasses

What is the easiest item on the table to attract attention? Of course, elegant wine glasses! But how to decorate wedding glasses so that they make a splash?

You can do it in different ways. The easiest way is to order original work in a specialized salon. However, if you want to make your own contribution to creating a holiday atmosphere, then try decorating DIY wedding glasses. The process is not as complicated as it might initially seem. There are many ideas that even those who have never done needlework can implement.

– a waste of time?

It has long been a tradition for the bride and groom to drink from beautifully decorated wine glasses. But is it worth spending time on such delights if the life of these accessories is so short? And indeed, the glasses are destined to be broken literally in the first half hour of the ceremony. It is believed that glass flying into pieces should bring happiness to a young family. Beautifully done DIY wedding glasses decoration- not a reason to abandon the ritual. Beat them to health! Just use a trick and prepare a couple of sets, perhaps even variously decorated, wine glasses. The surviving pair will make a great souvenir. You will appreciate the importance of accessories when celebrating your first wedding anniversary, and over the years theseDIY wedding glasseswill become family heirlooms.

DIY wedding glass decor

Ideally, you should make at least three sets of festive wine glasses. The first one will be used in the registry office, the second one can be taken with you to a photo shoot, and the third one will be waiting for the newlyweds on the formally served table.

If you are planning a small party, you can dodecoration and wedding glassesguests. Naturally, the decor here will be simpler, but in this situation the attention shown must be assessed. Those present will be incredibly pleased to lift the decorated wine glasses with their souls.

Decoration of wedding glasses for guests

But let's return to the paraphernalia for the bride and groom. For them, it is absolutely not necessary to take glasses of the same shape. A young wine glass may have a more rounded shape. For the groom, an elegantly formal glass, thin and tall, is suitable. But the decor of the couple should be kept in the same style. This will emphasize the harmony of the union.

Decorating wedding glasses: it’s time for business

The glasses will probably remain in photographs and videos from the celebration, so you should take care that they do not look ridiculous against the general background. You can start decorating wedding glasses with your own hands as soon as the couple’s outfits are chosen, and it becomes clear in what manner the hall will be decorated.

The design of the glasses should be in harmony with the style of the wedding

Absolute harmony is the main motto of festive design. If it is decided that turquoise will be the leitmotif of the decor, then this should definitely find a response in the outfits of the newlyweds, in the decoration of the wine glasses, and in the decoration of wedding bottles with your own hands. It could be some small parts or more significant background decisions.

Wedding bottles and glasses in the same style

A few ideas on how to decorate wedding glasses

“It’s better to practice decorating wedding bottles and wine glasses on ordinary glasses and empty containers”

Let's start with the classics of the wedding genre - gilding. There are two ways to decorate wine glasses in this way.

Option 1

This is where the leg will be decorated. Need to stock up:

1.​ masking tape;

2. old newspapers;

3.​ with a can of spray paint of the desired color.

Necessary materials for decoration

You need to start working by preparing the wine glass. It is thoroughly washed and dried. In order not to stain the top of the glass, I wrap it in newspaper approximately to the middle of the height of the stem and secure the wrapper with tape.

Secure the newspaper with tape

For greater reliability, the paper can be fixed at the top. This way you will be sure that it will not turn around at the most inopportune moment. Next, paint is used in decorating wedding glasses with your own hands. The table is covered with old newspapers, on which a wine glass prepared for decoration is placed upside down.

Painting the bottom of the glass

The open part of the leg must be evenly sprayed with paint. In order for the coating layer to lay down perfectly, it is better not to spray the composition from too close a distance. Work by stepping back a couple of steps from the item you are decorating.

The finished result

Option 2

In this case, it will be partially covered with gold top part. Painting tape will help you decorate wedding glasses beautifully with your own hands. It can be wrapped figuratively, in a spiral, or in some other way around the bowl.

Wrapping the top of the glass with tape

Hide the leg, almost up to the stand, under a piece of cellophane. Further everything according to the scheme. Paint is applied to the exposed parts. The glasses are left in this form until it dries completely. Now you can remove the protection and tape. The glasses for the wedding celebration are ready.

Decor of the top of the glass

A wide variety of materials can be used to decorate glasses for a wedding:

• feathers;
• rhinestones;
• beads;
• beads;
• ribbons;
• textile;
• paints;
• flowers;
• clay.

If you don’t have handmade skills, you shouldn’t immediately take on finishing work. It’s better to practice decorating wedding bottles and wine glasses with your own hands on ordinary glasses and empty containers.

Working with fabrics

Most often, needlewomen tend to use lace and this is quite justified. Its luxurious weave is gorgeous to begin with. All that remains to be done is to correctly place the fabric on the wine glass. Decorating wedding glasses with your own hands begins with degreasing their surface. To do this, use alcohol and a napkin.

Romantic decoration of glasses with lace

Measure the required length of the lace ribbon and make a blank, not forgetting to add an allowance of 5-7 mm to the seams. We fix the strip on the bowl of the wine glass using a glue gun. This must be done carefully so that there are no glue drips. From another piece of lace we will assemble a skirt. When decorating glasses for a wedding, it is attached to the stem. The finishing touch will be a satin ribbon bow imitating a belt.

Original glass with lace skirt

You can complement the lace composition with a scattering of sparkles and beads. The same algorithm is used to decorate with other types of fabrics: guipure, tulle, satin.

Working with ribbons

Decorating wedding glasses with your own hands using ribbons is a springboard for unleashing your imagination. Both a modest bow and luxurious drapery can become a stylish decoration.

Trimming wedding glasses with ribbons

Usually, satin or silk ribbons are beautifully woven around the stems of wine glasses, but you can complicate your task and make flowers from ribbons. To make, for example, a rosebud, which, by the way, is also suitable for decorating wedding bottles with your own hands, you will need a large-width ribbon. It is folded in half, bending along the wrong side, and the joined edges are swept away. To form a bud, you need to pull the thread. You can put together a whole bouquet of these roses.

Making a rose from ribbon

It is permissible to make the buds multi-colored. The compositions are fixed to the bowl of a wine glass. Decorating glasses for a wedding with ribbons is traditionally completed by decorating the latter with rhinestones and beads. They are used to embroider flower petals and make their cores. Thin, green ribbons or twisted thread can act as stems. To imitate drops of dew on flower petals, when decorating wedding glasses, they are decorated with small rhinestones.

Roses made from ribbons for decorating glasses

The most effective bows are made from satin, gauze or silk ribbons.

Decor with rhinestones

Bright and shiny, with their sparkle and tints they create a unique play of light. The most effective decorations for DIY wedding glasses are the so-called stars. You can make some pretty fancy patterns out of them. In general, it is recommended to use medium-sized pebbles of the same size and the same color spectrum. How to decorate wedding glasses with them? Yes, as your imagination dictates! If you want, post the symbol of celebration - wedding rings. You can make star scatterings and monograms.

Rhinestones create a unique play of light

Those more experienced in needlework can work with different fractions and colored rhinestones. They will help you lay out entire stories and fantastic allegories.

Working with beads

A universal decor used not only in decorating wine glasses, but also in decorating wedding bottles with your own hands. Typically, beads are used in symbiosis with beads. The elements are fixed to the glass surface with glue. The product must be degreased before decorating. After applying a layer of glue to the area chosen for decoration, carefully place large beads in the design. Fill the remaining voids with multi-colored beads and leave the glass to dry.

Decor of glasses with beads different sizes

Engraving

Decorating wedding glasses in this way can only be done by specialists. The only thing in which you can take the initiative is composing the text of the inscription or creating a sketch of the drawing. You can place an invented family logo, words of declaration of love, or portraits of the newlyweds on the glasses. The engraving design should be complemented with a delicate colored ribbon curling around the leg.

Example of engraving on wedding glasses

Do you want to do something similar to engraving in the design of wedding glasses with your own hands? Try making your desired lettering on glass using a stencil, clear glue and powder glitter. Draw and cut out letters or phrases on paper. Attach the workpiece to the bowl. Apply glue to your work surfaces and immediately sprinkle them liberally with glitter. Remove excess by shaking the glass slightly and leave the decor to dry. The paper is removed after the adhesive base has completely dried.

Fresh flowers to decorate glasses for a wedding

A unique, but, unfortunately, short-lived spectacle. All the charm of the decor will fade on the second day, but they will still complete the mission, and with what success!

Fresh flowers in the decoration of glasses

Fragrant romance is present in the decoration of the dresses of the young guests, so why not draw it as a red line in the table decoration? What else, if not a rose, a symbol of love, could become the material for decorating wine glasses for newlyweds. If you decide to start decorating wedding glasses with your own hands, then be prepared to sit through the work the evening before the celebration.

Step-by-step master class

In addition to the wine glasses, you will need:

• gel “super moment”;
• rose buds;
• beads;
• scissors;
• brush.

Decorating wedding glasses with your own hands traditionally begins with degreasing the glass. It is wiped with alcohol, and in the absence of the product - with acetone, the remains of which are washed off with running water. The surface of the glass is polished to a shine. We set the product prepared for work aside and begin disassembling it into flower petals.

We cut the bud from the stem and carefully, so as not to damage the delicate petals, disassemble it in parts. It is advisable to immediately sort the petals by size. This will make it easier to decorate glasses for the wedding in the future.

The petals are fixed to the bowl of the glass

The moment of truth is coming. We grease the pink petals with glue and fix them to the bowl of the glass. The decor is done from top to bottom. The smallest petals will be used first. They should be glued completely, over the entire surface. Don’t forget to leave 2 cm from the top border of the bowl. This is important in the design of wedding glasses, because it’s not souvenir products, which will simply be put on a shelf, you will need to drink from them somehow.

Attaching the petals to the glass knife

Having made the core, we move on to creating the next tier. Let's use slightly larger petals than we have already used. We will glue them only when the core is dry. We will place the second petal ring not end-to-end with the first, but retreating 0.7-1 cm down.

The petals will block the gap and the bare glass will not be visible.

We continue to work according to the already familiar algorithm, but now we coat only the base of the petal with glue.

Further on increasing. The largest pink petals should appear at the base of the bowl of wedding glasses decorated with your own hands. From the outside ready product should look like a wine glass planted in the middle of the flower. The base is ready.

Now we need to solve the issue with the leg. The easiest way is to decorate it with a satin ribbon in green shades, but if the desire to create has not yet disappeared, then decorate it with beads and seed beads. It will turn out very impressive.

DIY wedding glasses with rose petals

Feather decor of wine glasses

The technique is also universal, suitable for decorating wedding bottles with your own hands.

You should not cover the entire glass with feathers. It will look ridiculous. It is quite enough to make a feather edge at the base of the bowl, and then complement the decor with beads, ribbons, sparkles, and painting. The last option should be highlighted in a separate column, since it is very good in itself.

Wedding glasses with feather decor

How to decorate wedding glasses with painting

You can decorate wine glasses with paints in a variety of ways. If drawing is not your thing, that's okay. Stencils will help you make thematic drawings. They are fixed to the prepared glass surface with tape and the voids are painted with acrylic paints. Allow the latter to dry and remove the sticker.

Painting glasses using a stencil

When designing wedding glasses in this way, it is important that the picture does not “float”, so it needs to be hidden under a protective layer of varnish. The painting can be supplemented at your discretion with sparkles, scatterings of beads, sequins, and ribbons.

DIY wedding glass painting

Decoupage technique

“This decorative technique is often used when decorating wedding bottles with your own hands.”

A very unusual way to decorate glasses for a wedding. You need to prepare:

• rice paper (white);
• decoupage napkin with a themed pattern;
• pearl paint;
• glue;
• Polish for hair;
• two-centimeter wide masking tape;
• regular varnish.

We prepare the surface for decoration. Use masking tape to protect the edge of the bowl. We wrap the remaining part with rice paper so that it fits closely to the edge of the tape. The side ends of the paper are fixed with an overlap, with a wrap of no more than 0.5 cm. The excess wrapper is torn off.

Initial stages of decoupage of glasses

The next stage of decorating wedding glasses with your own hands is fixing the paper to the surface of the glass. This is done as follows. The bowl is moistened with water and wrapped in paper. The paper will get wet and cover the glass evenly. All that remains is to fix it in this position by covering it with decoupage glue. It is applied with a flat brush. The base for decor is ready, and it is sent to dry.

This will be followed by colorful decoration of wedding glasses. We select the necessary fragments of the drawings and lay them out on a file or cling film. We treat the pictures with hairspray several times. This will promote better adhesion of the parts to the surface. Place the pictures one by one on the bowl of the wine glass and coat the top with glue.

Spray the pictures with hairspray several times

At this stage of decorating wedding glasses with your own hands, you need to be especially careful. The pictures should not wrinkle or deform, so the glue should be applied from the center to the periphery and very short strokes should be made with a brush.

After all the elements are laid out and the glue has dried, the bowl of the wine glass is coated with glassy varnish and dried again. The glass is ready to use.

Final coating of glasses with varnish

This decorative technique is often used to decorate wedding bottles with your own hands. Decoupage will make it possible to indicate the purpose of each of them. Don't understand what we're talking about? Whether wedding guests will drink from decorated bottles or not is a rhetorical question, but two beautifully decorated bottles must be on the newlyweds’ table. They will not be uncorked. This champagne has a different mission. The first bottle will be unsealed to celebrate the first wedding anniversary, and the second will wait until the birth of the first child. The theme of decorating wedding bottles with your own hands is intuitive. The one that is destined to be drunk on the occasion of a new addition to the family can be decorated, for example, with angels; the second one, it makes sense to veil it under fabric. Choose a small floral pattern to look like printed chintz.

Decoupage bottles for a wedding

Polymer clay in the decoration of glasses

Looking for a way to decorate your wedding glasses? Take a closer look at the stucco decor. This is quite an impressive design. You will have to work with polymer clay. Do about the same as with plasticine. Blanks of flowers, leaves, wedding symbols, doves, and cupids are made from clay. While the product is at the modeling stage, it can be tried on at the place of future fastening and the shape can be adjusted. As soon as the blanks for decorating the wedding glasses are ready, they are sent to bake in the oven. Smaller parts need to be baked separately from massive ones. How long to keep the clay in the oven can be found in the instructions for the material.

Decorating wedding glasses using polymer clay modeling

The base of baked decorative elements should be leveled. This can be done with a wide file, usually used for manicure. For greater beauty, the components are opened with varnish.

The decoration on glasses for a wedding should be fixed using an adhesive base. Additionally, you can decorate the composition with rhinestones, make flower cores from beads, and paint the missing stems with acrylic paint.

Conclusion

There are countless ideas on how to decorate wedding glasses, and each of them is magnificent in its own way. Choose an option that interests you and try to prove yourself in handicrafts. A little effort - and now you have in your hands not a simple glass, but a real exclusive, a real work of authorship, which is quite capable of making a wedding celebration unforgettable.

Photo gallery - DIY wedding glasses

A wedding is a grandiose celebration, which is usually celebrated with chic and splendor. Therefore, couples begin preparing for the big day several months in advance, paying attention to even the most inconspicuous details. At a happy moment, when relatives and friends gather at one table, they should see luxurious dishes, exquisite dishes and decorations that would symbolize the newlyweds. In this article we will tell you how to make glasses with your own hands, which in the future will remind you of a grandiose celebration.

Decorate with rhinestones and sparkles

This DIY option for decorating wedding glasses will highlight the sophistication of the celebration. The choice in favor of shiny stones is made by couples at whose wedding crystals and diamonds are appropriate. Such dishes will add not only glamor to the design, but also showiness.

How to do it? Take small and medium rhinestones. You can choose the color as you wish, because today there are silver, gold, and mother-of-pearl. Before you start gluing the rhinestones, stock up on gun glue so that there are no streaks left on the glasses. Prepare in advance a template according to which you will decorate the glassware, especially if you have a complex pattern or inscription in mind. To simplify the task, just take a washable marker and apply light strokes to the glass, and then glue rhinestones along the contour.

Lacy and delicate

Decorating glasses with lace is suitable for couples who decorate their wedding in pastel colors, using delicate flowers and a light pattern. Such dishes on the wedding table will definitely delight the newlyweds and guests. Besides this a budget option registration

How to do it? You will need lace. Today, there are more than 10 types of patterns that are made both manually and by machine. Choose the most elegant one, use glue to carefully glue the lace onto the glass and the stem of the glass, and then let it dry. If you show your imagination, you can make the dishes lush and voluminous. To do this, you need to gather the lace fabric into a kind of headband.

Summer bouquet

Do you want to surprise your guests with the decor of your wedding glasses? Flowers and mini-bouquets of fresh plants will do the job perfectly. Appearance Such dishes will add richness and elegance to your celebration. However, you need to decorate the glasses either on the day of the celebration or the day before, so that the beautiful and fragrant flowers do not wither.

How to do it? There are two ways: decorate with artificial flowers or decorate with fresh buds. Before gluing the mini-bouquet onto the glass, you need to think through the design and create a template. You can use small rosebuds, use glue to place them on the ribbon, and then wrap them around the glass. But it is also not forbidden to make a small bouquet from a bud, green twigs and beautiful lace, which are subsequently attached to the stem. In spring, you can use delicate peonies or cherry flowers. IN summer period- daisies or daisies, and in the cold season choose a rose.

Creative impulse

Create a unique decor for your wedding glasses. The master class will help you decorate dishes for the occasion using paint. Here you can show your imagination and depict absolutely any design. It doesn’t matter what style your wedding is in - fairy forest, a gothic castle or a hippie van. The ideal solution would be acrylic paints, which dry within a day and do not wash off or wash off for a long time.

How to do it? The bride and groom's glasses must be treated with alcohol to dry the surface and degrease. This way the acrylic will adhere more firmly to the surface. Always use templates, then you can create an even, beautiful and accurate drawing without flaws. You have a chance to make patterns, beautiful calligraphic inscriptions, and drawings of flowers. If desired, you can complement the design with rhinestones, sequins or lace. If you want to make an impression, use fluorescent acrylic paint, which will glow in the dark. This way you will always be the center of attention, especially when the feast turns into evening dancing.

Silk ribbons

DIY decoration of wedding glasses using ribbons is a budget option that will still delight your guests. Here you can also show your imagination, so you shouldn’t limit yourself to just tapes. Choose satin material, but for added effect it is recommended to use lace. Main plus of this material The fact is that today the color range is not limited, and you can choose ribbons to match the design of the celebration.

How to do it? Use gun glue to secure satin or lace. Wrap a satin ribbon around the stem of the glass, touching a few centimeters of the bottom. Make a graceful bow and carefully place it on the glue. Great idea You can make a man's tie or bow tie from a ribbon, and create a light lace dress for the bride's glass. Don't be afraid to complement the design with additional decor. For example, grease the surface of the glass with a thin layer and sprinkle generously with shiny sand so that not a millimeter is left free.

Decorative rope

Using rope or braided cord will add an exotic touch to your wedding. Generally, brown twine and wooden items are recommended. In addition, the glasses of the bride and groom can be used throughout the entire celebration and not be afraid that in the process of great fun you can break a family heirloom.

How to do it? Take a thin rope Brown and glue in the gun. Apply a thin layer of adhesive, and then wrap the string around the glass so that there is no free space left. Pay attention to the photo above, how impressive the thread looks. You can complement the decor of wedding glasses with ribbons and wooden objects. For example, you can use thin tree bark or bamboo sticks. This tableware design is suitable for those who want to have a wedding, for example, in an African style.

From polymer clay

The decor of wedding glasses made of polymer clay gives scope to the human imagination, because this material is the same as plasticine. You can make any drawing, inscription, figure or pattern from it. The main thing is to be creative and not be afraid to distinguish yourself. If you have not worked with polymer clay before, then better decoration Entrust holiday dishes to a professional. However, you will still be able to choose the perfect and unique template. But if you decide to do it yourself, then this master class on decorating wedding glasses is for you.

How to do it? Take polymer clay desired colors, and then form small petals. Use a sharp stationery knife or blade, so all the parts will turn out smooth and neat. Carefully make small buds that resemble a rose. Prepare the leaves and small stems using a thin toothpick. Before applying polymer clay to a glass, it must be degreased with alcohol. Let the glass dry, and then apply a thin layer of glue and secure the finished flowers. You can create buds of different sizes to make the glasses look more impressive. In order to work with the other side and not damage the finished flowers, the polymer clay needs to be baked. It is not prohibited to use an oven in which glassware is placed for 15-20 minutes at a temperature of 100 degrees.

Shiny sand

To create an exquisite design, you will need glitter - sparkles that look like sand or dust. Applying such decor is easy, you just need to think through the design, but you are guaranteed admiring glances.

How to do it? Decorating wedding glasses with your own hands begins with choosing the material. The color of glitter can be used as desired, and glitters are sold today, ranging from dark tones to bright acid powders. The dust is applied to the surface of the glass, which is pre-treated with a thin layer of adhesive. If you want to create a pattern, you can use a gun to apply glue and sprinkle glitter sand on top, then wait a few minutes and shake off any excess glitter.

Engraving

The bride and groom's glasses will be original and unique if you use engraving. Such festive dishes will become a real family heirloom that will last in the sideboard for decades. As a rule, the names of the newlyweds are used, but you can supplement the decor with vows, patterns and the date of the celebration.

How to do it? Engraving is best done by specialists who will carefully cut out the inscription on the glass surface. You can also try to make the decor yourself, using only ready-made template(stencil) and a liquid that will simulate glass etching. To do this, you need to treat the glass with alcohol or acetone to degrease the surface, then it is important to stick a stencil and cover the glass with liquid. After waiting a few minutes, you should remove the stencils and enjoy the beautiful engraving with your own hands. To enhance the effect, the color of the liquid can be changed by adding a few drops of paint to the mixture.

Spray effect

This original decor wedding glasses, which will take you only 10 minutes. IN this method we will also use glitter, because this is truly unique material. Try creating glasses that resemble silver or golden frost. This holiday tableware design will make your table look fabulous and magical.

How to do it? Take the glitter and place it in a small bowl. Add a little liquid glue and mix with a spatula. Take a porous sponge, carefully lower it into a bowl of shiny sand and apply it to a grease-free glass surface, simulating frost. If necessary, the procedure can be repeated after the first layer of glue has dried. To make the glass look impressive, you can use glitter different colors. It is not recommended to apply glitter along the edges of the glass, otherwise during the celebration the bride or groom may be poisoned by both the glue and the glitter itself. Finally, you can seal the decor with clear varnish or epoxy resin.

Greek pearls

Tired of rhinestones and sparkles? Then use wonderful beads that will always come to the rescue. It doesn’t matter if your arsenal includes decor of different sizes, because you can even use beads!

How to do it? Start by preparing the necessary material. Choose beads of the color in which you are holding your celebration. Agree, it would be inappropriate if your wedding is all in red and pink colors, and the young couple has glasses with blue and green beads on the table. To create decorated dishes you will have to use a glue gun. Apply a drop onto the grease-free glass and use tweezers to carefully place the bead. Try to do unique design: Start decorating the glass with large artificial pearls, gradually reducing the size of the beads. Approaching the edge of the glass, you can use small beads. Decorate the glassware with silk ribbon or wrap the stem with brown twine.

Summing up

Decorating glasses - truly creative process, which always stands out for its unique approach. Decorating a wedding interior can become a real passion for you and, perhaps, will develop into a hobby over time. Don't worry if you don't have enough skills and abilities in your arsenal - everything comes with experience. You just need to practice on glassware that you don’t mind ruining. When you hone your skills, you can safely switch to expensive crystal. You can be sure that your glasses will impress your guests and loved ones. On a great wedding day, all the details are important, so don’t be afraid to use your imagination, because everything that happens at the celebration will remain in your memory.

For the hardworking - a bright light burns through life, for the lazy - a dim candle

DIY decoration of wedding glasses

Pleasant pre-wedding excitement, when you need to take into account every little thing, starting with ordering the wedding itself, designing invitations for guests, ordering or sewing wedding dresses, etc. take up a lot of time. Sometimes, in the hustle and bustle, people forget to take care of all the wedding paraphernalia and take into account all the little things that accompany the wedding ceremony. But, as you know, the whole consists of little things.

Today we will talk about wedding glasses - an indispensable attribute of the entire wedding ceremony. You must have at least two pairs of them. Experienced people buy a set of glasses, keeping in mind that glasses can break at the most inopportune moment and ruin the mood before or during the wedding.

One of the pairs of wedding glasses will be needed at the photo session for the future wedding album, while the second pair will decorate the wedding table. It is she who should give the wedding feast style and sophistication. The rounded shape and thin stem of the glass are associated with a young girl, and if this glass is designed accordingly, it will successfully complement the bride’s wedding ambiance.

Wedding glasses may vary in shape, but the design of wedding glasses should be made in the same style - this personifies the harmony of the newlywed couple.

The first pair of wedding glasses is intended for the newlyweds' walk and photo-video shooting. Without wedding glass decorations can't get by here. They should be light and airy. Rhinestones and snow-white lace will emphasize the youth and purity of the bride.

In the photographs in wedding album it will look sophisticated. Agree, a bride in a gorgeous wedding dress with a plastic glass in her hand looks simply ridiculous. Even an inexpensive glass decorated with a ribbon that matches the color of your dress is incomparably better than a plastic cup.

The tradition of breaking glasses “for good luck” is gradually becoming a thing of the past. The newlyweds want to keep the glasses so that they remind them of happy day their marriage. At the registry office, your couple will also stand out from other couples if you use one of the methods suggested below.

Decoration of wedding glasses- this is a whole skill, the result of which depends only on the taste and skill of the manufacturer and the availability necessary materials. There are masters who work with wedding salons who are engaged decorating wedding glasses. But if desired and available necessary materials you can do it yourself decoration of wedding glasses.

How decorate wedding glasses so that they not only decorate the table, but also speak about the taste of a young family? For this purpose, you need to take into account the style in which the festive table will be decorated; the overall color scheme is important. These components determine what materials need to be used for decorating wedding glasses.

For example, if the tablecloths are festive tables burgundy color, then weaving the material into decoration of wedding glasses the same color is desirable. General style and the color, of course, should not be discordant with the bride’s outfit. What materials to choose to decorate wedding glasses?

Most often, a standard solution is chosen for this - two wedding rings made of foil are attached to the walls of the glasses. However, many people want the wedding itself and all its paraphernalia to be exclusive. There are a great variety of materials for this purpose. These are: artificial flowers, beads, rhinestones, ribbons of various shapes and colors, paints, glue and many other handicraft products. Let me give you some advice.

To decorate wedding glasses, It's enough to know a few secrets. Any work with material and glue should be as careful as possible; there should be no traces of glue left on the surface of the glass. The product should not be clumsy and attract attention to itself. The decorated glass should only exquisitely complement the overall wedding decor plan. Let's take a closer look at the decorations themselves.

— Perhaps the easiest and fastest way decorate wedding glasses lace. Even if you just stick lace around the glass and decorate the stem with a kind of “skirt” made of the same lace, it will already look beautiful and original.

— Glass decorations medium-sized rhinestones are very stylish, the glass begins to sparkle and play with all its colors. Surely, guests will pay attention to it and will certainly note your exquisite taste.

— Wedding glass decorations flowers - the most popular and at the same time romantic way to make the moment of raising glasses unforgettable. You can stick fresh flower petals or whole buds onto a glass, or you can make flowers from ribbons or buy special petals from fabric.

— Exquisite original engraving on the glass of portraits of the newlyweds, logos, family monograms in combination with an original twisted ribbon will suit many couples.

— Decorating wedding glasses with paints is very original method their design. A good artist can create something real piece of art on a simple glass made of ordinary thin glass.

- And finally, ribbons, bows, medallions, brooches - all of them will help complement the design of the wedding glass, or they themselves can be a separate decoration.

All of the above will be appropriate provided that such an exclusive glass is raised by a well-groomed female hand by a thin stem, so that, firstly, it does not hide its beauty, secondly, the champagne in the glass will not heat up during numerous toasts and toasts, and, thirdly, it is simply beautiful.