Beautiful leaves of paper. How to make paper leaves with your own hands? Beauty from dry leaves

Hello dear readers. Lately I became so interested in scrapbooking and creating postcards. Probably, for me, this is an activity from which I get great pleasure. I’m very glad to share the creation of flowers, leaves, and cards on the blog. I'm a student, so my stories and master classes are more likely to be for beginners than for professionals. But everything starts with the first step, even the longest journey. Gradually you improve and you get beautiful work. When you become imbued with something, it becomes a part of you. I think creative people will understand me.

I am very happy when beauty is born in the form of a beautiful postcard. This is a new activity for me, but very interesting. There is already a large stack of postcards. My daughter suggests making an exhibition.))) This is an activity “for the soul”; when I make postcards, I relax. Interesting activity.)))

Every time you collect knowledge bit by bit you create beautiful things. Today I have simple paper leaves for a rose. I made a master class for you. I'll tell you how I make rose leaves.

Paper leaves for roses. Master Class. Scrapbooking

To create the leaves I will need green paper. My last purchases were not limited to one dark green paper.

I buy paper at a craft store. My paper is double-sided, thick.

I will also need a simple pencil and scissors.

You can use a template or cutting to create leaves. I will draw the leaves by hand. I haven’t purchased any cuttings for myself yet.

On a piece of green paper I draw a rose leaf with a simple pencil. I cut out the leaf with scissors. I save a lot of paper))

Recently, prices for materials have been constantly rising. I don't know about you. Tell me where I can profitably buy materials for scrapbooking, if you know.

I do different photos so that it is clear how I fold the leaf. First you need to roll and then unfold the leaf. This is how you get such a “miracle leaf”. Very plausible, in my opinion.

I was taught how to make such leaves at a master class that our daughter attended in the summer. I asked the teacher a question and received step by step instructions. For which she was very grateful. This is how I make leaves now.

The result is leaves very similar to rose leaves, with veins. To create the leaves, I use green paper of different shades. The results are gorgeous leaves.

If you make leaves for roses differently, then share how you do it below in the comments.

I make different roses, I shared this option on the blog so far. As it turns out, it’s not at all difficult to do, as I previously thought. It’s with flowers that I glue leaves on cards. Looks great!

Nature is an excellent artist. She paints her creations so talentedly that even such a trifle as a bright red maple leaf has become a symbol for the flag of an entire state. Looking at the samples that autumn presents to us, you can learn how to create autumn leaves with your own hands from man-made materials.

There are many such materials, and this article presents schemes for working with the most popular of them.

paper art

The origami paper folding technique is an oriental art that will help in simulating autumn leaves. Below is a diagram of how to fold a maple leaf.

From a combination of autumn leaves folded using this technique, you can create collages and appliqués, but even one carefully executed leaf can become a masterpiece.

Another art that allows you to depict an autumn leaf more voluminously is quilling.

The leaves obtained using this technique are delicate and delicate. To create a maple leaf you need to prepare:

• thinly sliced ​​strips of equal width in yellow, red and orange;
• sheet of cardboard;
• album sheet;
• toothpick;
• PVA or silicate glue;
• a sheet template printed or drawn on paper;
• pins.

The template must be placed on a sheet of cardboard and protected from gluing with transparent polyethylene and (or) tape. Along the contour of the lines on the template, use pins to secure the frame of the future sheet of red strips of paper.

Roll yellow and orange strips of paper into rolls, gluing the end of the strip with glue. The rolls will need to be modified, giving them the shape of a “drop,” “eye,” or “triangle.” This is necessary in order to fill the template shape in the corners, making the pattern dense, after first lubricating the figures with glue.

Attach the tail and reinforce the entire work along the contour by covering it with red flat paper.

Can only be used yellow stripes for the main color, and convey the play of tones using red blush, treating the edges of the sheet with a cotton pad.

An interesting option for using paper to make leaves is the accordion folding technique, imitating corrugated paper. This also gives the sheet additional volume.

The difference is that by folding the paper manually, as if corrugating it, the sheet turns out to be quite rigid. Factory-made corrugated paper has a slightly different purpose. It is very delicate and is used not for leaves, but for flowers.

Therefore, if we make leaves from corrugated paper, then we corrugate the colored paper ourselves.

Universal plastic

Sometimes there is a need to make autumn leaves different shapes ourselves, since it is not on sale necessary elements or they are too expensive. You can make them yourself from modern material - from foamiran. This is a relatively new decorative material used for jewelry, floristry, wedding arrangements and other areas. It is environmentally friendly, easy to paint, flexible and comes in a variety of colors.

Leaves made from it are distinguished by their naturalness, compared to other materials. They look like real ones.

To make such leaves, you need:

1. Several sheets of foamiran to match the color of autumn leaves.

Leaf patterns various trees from paper so that blanks can be made from them.

1. Using toothpicks, draw outlines according to the templates on the selected sheets. Cut out the blanks.

1. In nature, leaves are rarely completely intact, therefore, in order to give the leaves natural look, use a toothpick to make holes in them.

1. Acrylic or oil paints Using a piece of sponge, apply paint along the edges and along the petioles.

1. Using a lighter, lightly burn the edges of some leaves to “age” them.

1. Use an old toothbrush to brush the leaves, spraying paint.

1. Using a special template-mold, which has the texture of a natural leaf, give the blanks a mesh pattern, like real leaves. To do this, you need to heat the workpiece on an iron and immediately apply it to the mold so that the imprint has time to form.

1. To stiffen the leaf, apply glue to the pre-prepared floral wire with a toothpick and press it onto each leaf so that petioles are formed (Seconda glue).

When working with kids, you can make beautiful autumn leaves from plasticine.

Lay out and knead pieces of plasticine on a template cut out of paper. different colors they will like it. Using a toothpick you will need to draw veins and smooth out the sheet. Place plasticine insects on them. The result will be a bright and colorful work.

Knitted autumn

Autumn motifs inspire you to transfer bright and multi-colored images to clothing and textiles. Images of leaves look very romantic, being made in the form of a pattern with knitting needles. All that remains is to choose the color of yarn that suits you.

Useful tips

In autumn, nature provides a huge selection of materials from which you can make various crafts, paintings and applications.

In this article you will learn how to make beautiful flowers from leaves, a vase from yellow autumn leaves, and many other crafts, including crafts that you can do with your children.

On our website you will also find:

• Beautiful and simple applications for those who love autumn
• Beautiful DIY crafts made from natural materials

Crafts from autumn leaves: bowl

You will need:

Colorful leaves

PVA glue

Sponge or sponge brush

Scissors.

1. Inflate the balloon.

2. Mix water and PVA glue in a 1:1 ratio.

3. Use a sponge to apply PVA glue to the ball.

4. Carefully begin gluing the leaves to the ball one by one.

* Trim if necessaryscissorsleaves or twigs attached to them.

5. Apply glue over the glued leaves to secure them in place.

6. Continue gluing leaves until the entire bottom half of the balloon is covered.

*May need to be glued more leaves to the bottom of the ball so that the bottom of the future vase is strong.

7. Leave to dry for 24 hours, after which you can pop the balloon and you're done!

Table decoration made from maple leaves

You will need:

Multi-colored leaves (if you use artificial ones, the decoration will last a long time)

Strong thread or fishing line

Scissors

Superglue or hot glue

Baking paper

Masking tape

Centimeter.

1. Using a centimeter, measure the distance between the chandelier and the table so that you know how long to cut the thread and baking paper.

2. Cut the paper to the desired length.

3. Cut the thread, the length of which should be 15-20 cm longer than the baking paper.

4. Using masking tape, secure the thread at the top and bottom of the paper, leaving 15-20 cm hanging from one end of the paper. You will use this end of the thread to tie the craft to the chandelier above the table.

5. Starting with the top piece of masking tape, begin laying out the leaves (face down and from largest to smallest), leaving a few centimeters (5-7 cm) between them. Continue adding leaves all the way to the bottom.

6. Once you have everything laid out and are happy with how the piece looks, use glue to glue the leaves to the string.

7. Make several of these strips with leaves and tie them to the chandelier above the table.

Roses from autumn leaves

You will need:

10 leaves of different sizes (for one flower)

Short branches

Scissors

Duct tape or floral tape.

1. Take a small leaf, place it face down and bend the ends. After this, start rolling the leaf on one side to create a bud.

2. Take the second sheet, turn it face down and fold the top end towards the center.

3. Place the first leaf in the center of the second leaf, fold the outer ends of the second leaf and wrap both ends around the first bud.

4. Continue adding leaves, getting larger and larger leaves.

5. When you have added all the leaves (or not all, but achieved the right size flower), hold the bottom of the flower and begin wrapping it with duct tape while securing the flower around the branch. Trim off any excess parts.

6. Make several similar flowers for a bouquet.

Bouquet of roses from leaves (photo instructions)

Bouquet of roses from leaves (video)

DIY Leaf Crafts for Kids: Turkey

You will need:

Cardboard (for 5-6 circles)

Stapler

Scissors

Leaves (about 20 pieces)

Toy (plastic) eyes.

1. Cut 5-6 circles from cardboard different sizes. You can use cups, saucers, plates and other small round objects as auxiliary tools.

2. Remove stems from leaves. Leave two leaves with stems, because... these stems will act as turkey legs.

3. Glue each piece of paper to its own cardboard circle.

4. Stack the circles one on top of the other. They can be attached with glue or a stapler. If you use a stapler, it is better to attach each circle separately to the adjacent circle.

5. Glue a large brown leaf to the back of the large circle.

*If necessaryscissorstrimextra parts.

6. Take one free sheet and cut out a small triangle from it - this will be the turkey's beak. Glue it to the center of the first leaf.

7. All you have to do is glue on the eyes and the turkey is ready!

Children's crafts from leaves (photo)

Here are a few interesting examples How to make beautiful children's crafts from simple leaves:

Applications from autumn leaves: animals

Leaf Crafts for Kids: Alphabet

You can make an alphabet from autumn leaves.

Crafts from dry leaves: paintings

Very beautiful pictures can come from fallen leaves. These paintings can decorate any interior.

Autumn compositions from leaves

While in the forest, you can make beautiful patterns from leaves on the ground and photograph them as a souvenir.

Crafts from maple leaves: large autumn leaf

You will need:

Plywood or thick cardboard

Simple pencil

Many leaves

PVA glue

Sponge or sponge brush

1. On large sheet Using plywood or cardboard, draw a large maple leaf with a pencil.

2. Find fallen leaves in a park or forest and dry them on baking paper.

3. Lay out the leaves in a pattern on the plywood, take a brush and PVA glue, apply glue to all the leaves and leave to dry.

After the glue dries, all the leaves will harden. You can trim off excess parts if necessary.

4. Glue the leaf blank to plywood or cardboard. For better adhesion, use superglue.

5. Use a straight branch as the trunk of your large leaf. It can also be glued with superglue.

Ready!

DIY crafts from autumn leaves: mask

You will need:

Leaves of different sizes

Cardboard (from under a box of cereal, for example)

Scissors

Hot glue or PVA glue.

1. Draw on cardboard simple form mask and cut it out.

2. Check where on the mask you need to make holes for the eyes.

3. Make holes for the eyes and insert an elastic band into the sides of the mask so that the mask can be put on.

4. Using PVA glue or hot glue, begin gluing the leaves to the cardboard mask, starting from the outside and working towards the center.

Bouquet of flowers from leaves

You will need:

Autumn leaves of different colors (30-35 pieces)

Floral wire

Green adhesive tape (scotch tape) or floral tape

Scissors.

1. Place your leaves on a flat surface in order, from small to large. Clean them from dust and dry them.

2. Use scissors to cut off the leaf stems.

3. Take the wire and cut it into small pieces, about 10 cm long. Each piece will be used for a separate sheet.

4. Take floral tape or regular adhesive tape (scotch tape) and cut or tear off several 5 cm pieces.

5. Take the second largest sheet and wire make a hole in it 0.5 cm from the edge. After this, bend the wire and twist it. This must be done carefully so as not to tear the sheet.

Back view:

6. Use duct tape to wrap the wire. You need to attach the tape to the edge of the leaf and begin to carefully wrap the wire.

7. To attach the wire to the smallest sheet, you need to twist it and only then insert the lower part of the wire into it.

Make a stem out of wire to form the core of the flower.

Wrap the wire with duct tape.

The core and petals are ready and can be connected.

8. Wrap the second leaf around the core and add a second leaf, a third, etc.

Today we want to tell you how you can make autumn leaves from paper from the simplest paper modules. And these will, of course, be maple leaves - feathery, wide and simply very beautiful. Moreover, the leaf is beautiful in itself, and can be used as an element of a garland or as a component of other crafts, ideas for which you will find below.

Today we will talk about how to do:

To make autumn leaves out of paper, you needed:

note paper (multi-colored), square; we have a side of 8 cm;

any glue.

How to make autumn leaves out of paper: master class

We work with note paper - squares with a side of 8 cm. Of course, to create autumn leaves, you can use paper of any color and format, the main thing is that it is a square or rectangle, cut to form a square.

If you take a separate leaf (8x8 cm) for each module, the finished leaves will come out too large. They can be used, say, to create a wall garland (wall garland, because the leaves are not double-sided after all) or to decorate a large display case.

If each leaf is cut into 4 parts, the finished autumn maple leaves will come out in a good size, neither large nor small. And the scope of their use is expanding dramatically! This could be a packaging design element, a fragment of a postcard or a craft. Below we will look at how to decorate a gift box with such leaves, make a drawing of a tree with paper leaves and an autumn wreath.

Let's get started.

To create one maple leaf according to our sample, you will need 10 squares, i.e. 2.5 sheets for notes.

We fold one of them in half and in half again, pressing the folds well. We unfold it to its original position.

Under the sheet marked in this way, we place two more sheets of paper for notes and cut all three sheets along the folds.

We fold 9 squares out of 10 diagonally.

Then we unfold each one (the module in front of us is positioned so that the fold lies vertically) and bring the right and left corners to the fold, as shown in the next photo.

Three modules are already ready (let's call them large), and with the remaining six we do the same, but now we bring the lower cuts on the right and left to the fold. It turned out like this (let it be small modules).

Here are all the modules that are needed to assemble one autumn maple leaf from paper.

We put small modules in pairs, like this.

Lubricate them with glue - the area that is highlighted in the photo with red shading.

Then we glue the large module.

We got three shamrocks. On one of them, we lubricate the folded wings, indicated in the photo with red shading, with glue.

Glue trefoils onto the glue strips so as to assemble a maple leaf fan.

We have one square left. Lubricate about half the square with glue (the lubrication area is marked in red).

We seal the back of the leaf with it.

Now you need scissors. The lines for cutting are outlined in red.

We bend the corners to form a leaf stem.

We coat one of the parts with glue.

Your handmade autumn paper sheet is ready.

What can be made from them?

Crafts from paper autumn leaves

Of course, there are a great many options for creating crafts from autumn leaves from paper. We will give only a few of them. For example, they can effectively decorate a gift.

Gift packaging

A gift in an ordinary cardboard box will instantly “sparkle” if you tie it with jute twine and decorate it with a couple of paper maple leaves. What do you think?

First we will make a blank: a cardboard circle for the base of the wreath. To do this you will need a compass.

Let's cut out our circle.

And let's start assembling the wreath. You can glue it with anything - any glue that sticks to paper. To save time and make the craft more reliable, we used double-sided tape.

We cut it into relatively narrow strips and paste it all over the ring.

Remove the protective paper and glue the finished paper leaves.

Craft tree from paper leaves

It’s simple: on a sheet of whatman paper we draw a trunk and branches with paint.

And glue our autumn leaves from paper in random order.

Eva Casio specially for the site Handicraft Master Classes

You can not only collect yellowed autumn leaves in the park to decorate children's crafts, but also perform DIY leaves using colored paper or corrugated paper, paints and even wax crayons. You can decorate a group with such bright paper leaves kindergarten before autumn ball or create an interesting decor for a children's room, because in the fall there is not enough bright colors. But you can find out how to create a beautiful bouquet from natural material.

DIY leaves

DIY autumn leaves can be done using wax crayons, however, due to the specific nature of the work process, the craft can hardly be trusted small child, rather, this is an idea for parents who need to decorate a class or group before the autumn ball. Such leaves will be useful for decorating various accessories with which you can decorate your home. The main advantage of homemade leaves is that over time they will not lose their beauty and their bright color. Start making the craft immediately, because we will reveal all its secrets to you.

Thanks to melted wax crayons, you can achieve a bright and unique color combination, using crayons, each leaf will be original. In addition to the multi-colored wax crayons that every child has, because they are so convenient to draw with, you will also need wax paper, a sheet of plain paper, and a grater for your work. At the final stage - a pencil and a sharp stationery knife. You will also definitely need an iron; don’t worry, the coating won’t get dirty during the process. It is better to choose crayons in bright autumn colors - red, orange, yellow, gold, you can use “remnants” (remnants of pencils, very small pieces that are no longer convenient to draw with).

Crayons of different colors should be grated on a fine grater to form crumbs. Then spread the multi-colored crumbs on a sheet of wax paper in an even layer (without gaps, gaps), cover with another sheet on top, and another layer - regular White paper. You have a “pie” made of paper and chalk crumbs, which must be carefully ironed with a hot iron. Under the influence of heat, the wax shavings will melt and a uniform layer will form, which must be allowed to cool.

You now have another sheet with fancy multi-colored patterns, which we will use as the basis for creating leaves. Now you need to put leaf templates on top (maple templates look the most beautiful), trace them along the contour with a pencil, and then cut them with a sharp knife.

Have you noticed that make your own leaves Not at all difficult, but due to the use of an iron, the work may be unsafe for small children. But children will be able to use ready-made wax leaves in their crafts, including them for decoration. The main rule for the long-term preservation of our crafts is to avoid direct contact with sun rays and place decorative elements near heat sources.

DIY paper leaves

They can turn out no less bright and unique DIY paper leaves. Children will simply be delighted with this idea, because they will be able to color the leaves just like nature does. We will create the leaves using the appliqué method; it is this technique that the children have already mastered to perfection earlier, when they created them in kindergarten.

The main material that we will use for the craft is colored paper bright colors. From additional materials: a sheet of baking paper, double-sided tape, PVA glue (or special glue for decoupage), a brush and a marker.

It is advisable to use orange, yellow, red and gold colors, but the child can use other colors to make the leaves look like they are from a fantastic fairy tale. Now the selected colors (this can be one-sided colored paper, quite thin) need to be torn into random small pieces. Even this stage creative process has a positive effect on the development of a preschooler, in particular, it develops fine motor skills. You should not resort to using scissors, because uneven, torn edges will add grace to our leaf.

You need to spread parchment on the work surface, and lay out pieces of paper on top, each one having previously been coated with glue on the reverse side. Pieces can be placed on top of adjacent ones, hiding the joints. When the layer of paper is laid out, a thin layer must be applied on top special staff adhesive for decoupage, which will ensure reliable fixation.

All that remains is to wait for the glue to dry, draw the outline of the leaf and cut it out. An element is ready that can become part of a beautiful autumn composition or DIY leaf crafts.

DIY flower leaves turn out natural and neat if you use corrugation. Thanks to its texture, using corrugation you can create concave and wavy petals that repeat them natural shape. Another material that will interest experienced needlewomen is foamiran, with which you can convey the natural texture of a leaf - thin edges with veins.