Make a large paper rose with your own hands. Large roses made of corrugated paper

Paper rose. Master Class

Modeling. Paper plastics. Master class with step-by-step photos.

Master class with step-by-step photos “Rose. Breath of Summer."

Purpose. Paper roses will be a wonderful interior decoration. Can be used in scrapbooking when designing postcards, albums, and creating paintings. Or you can just give a bouquet.
Ovchinnikova Svetlana Aleksandrovna, teacher of OGKOU SKOSH No. 39, Ulyanovsk.
Master Class will be useful for children of middle and high school age, educators, teachers and all lovers of creativity.
Target: creating a rose from damp thick paper.
Tasks:
- learn to work with wet thick paper;
- promote the development of creative abilities through paper-making and modeling;
- develop fine motor skills of the hands;
- cultivate aesthetic taste and accuracy in work.

What do roses whisper in the morning,
Waking up in the morning?
Thank your fate
And a state of rest?

We love roses for their beauty,
Their wonderful smell, aroma
For the joy they bring to people,
They are given a fleeting glance!
(from the Internet)

Paper is the simplest, most accessible and easily processed material. Depending on the idea and purpose of the product, paper is used that differs in thickness, texture, texture and color.
The wet folding technique takes advantage of the ability of wet paper to retain its shape after drying. The secret lies in paper sizing - a water-soluble glue that binds the paper fibers and gives it rigidity. When the paper is wetted, the glue dissolves, the fibers separate from each other and the sheet becomes soft and pliable. When drying, the reverse process occurs and the paper takes on the desired shape.
To create flowers using this technique, you can use paper for watercolors, pastels of various colors, cardstock or whatman paper. The paper thickness must be at least 80-120 g/m and up to 200 g/m. I bought paper at an artist's store individually.
The master class is based on the example of this rose. I wish you pleasant viewing.

It is necessary to prepare materials and tools:

A sheet of white office paper;
- green and yellow (color optional) paper with a density of 160 g/m2, one sheet of A-4 format;
- green corrugated paper or tape;
- a piece of wire 25cm long;
- scissors;
- wire cutters;
- PVA glue;
- a simple pencil;
- a ballpoint pen with a non-writing refill;
- tool for embossing - boulka;
- protractor;
- ruler with round holes of different sizes;
- a needle (like a darning needle, with a blunt tip);
- a soft mat or backing (the kind was in the box with the shoes);
- cloth napkin.

First you need to prepare a petal template. The blank is 6-petal. To do this, you need to measure a square with a side of 6 cm on a sheet of office paper.

Cut out this square and fold it in half.

Mark the middle of the resulting rectangle - 3cm. Use a protractor to mark 60 degree angles. 180:3=60. Draw the lines.

Fold the workpiece in thirds along these lines.

From edge to edge, draw the outline of the edge of the petal. Cut out.

Open the template, mark the middle.

We trace the template on a yellow sheet of thick paper. One flower requires 6 blanks. It is better to outline with a non-writing ballpoint pen, this way there will be no pencil marks on the paper that could spoil the appearance of the flower. Along the long side of the sheet, across the width of the workpiece, cut a strip of paper, fold it like an accordion and cut out the petals. From one such segment you will get 4 pieces.

The rose preparations are ready.

Pierce the blanks with an awl in the middle. Cut the petals towards the middle. As in the photo.

Moisten the paper. Fold in a stack and hold under a tap of water for 1-2 seconds, walk over the blanks with your fingers, distributing the water. Place it under water again and quickly remove it. You can place one piece at a time in a container of water and remove it immediately. For any option, place the workpiece on a wet cloth. Do not wring the napkin too hard, just so that the water does not flow. If the room is hot, place the blanks between layers of fabric. We only work with wet parts. For clarity, dry and wet workpieces.

At the end of a piece of wire, use pliers to make a small bend in the form of a loop, leaving a little space.

Make the center for the flower out of paper to match the color of the flower. To do this, fold several short, narrow strips into a stack. Place the wire in the loop in the middle and press the wire to the end.

Glue the ends of the paper together to form a ball or drop. You can use a foam ball with a diameter of about 10-12mm.

The first blank put it on the wire up to the ball. Apply glue
on 2 opposite petals.

Wrap the first petal into a cone shape and let it stick together well.

Glue the second petal on top of each other, creating a cone. Let it stick together well.

Apply glue to the next 2 opposite petals. Glue it into a cone as well.

Glue the last pair of petals in the same way. Press down the resulting corners at the base. This was perhaps the most difficult stage.

string second part petals on wire. Apply glue to three petals, one after another.

Glue them in a circle, moving them behind each other.

Glue the remaining petals in the same way. And while they are wet, you can slightly bend the edges of these petals. Press the resulting corners of the base. You can place the structure in a hole of suitable diameter. The size depends on the thickness of the paper.

Third detail. Twist the edges of the petals at an angle of 90 degrees using a needle. As in the photo. We work with wet workpieces!

Thread the third piece onto the wire, with the curled edges down. Apply glue and glue the petals in threes.

After gluing the last petals, press the corners of the base.

Place the flower in a suitable hole on a ruler with a round hole. This way the petals will stick together at the same time. And the workpiece will dry out a little.

U fourth, fifth and sixth parts twist the corners of the petals using a needle (like the third part). Turn the piece over with the folds facing down. On a soft mat (backing), twist the workpiece, as if rolling it with a roll from center to middle. I have this homemade instrument. You can use a nail polish cap with a round top.

You will get this detail.

Insert each part into the holes of a ruler of suitable diameter, straighten the petals. Allow the pieces to dry completely. You can use a hairdryer.

Dry parts take on the appearance of a cup. Apply glue to the base of the flower and stick it so that the petals are in a checkerboard pattern, straightening the petals.

It will turn out like this.

Glue in the same way 5th And 6th details. Place the flower in a ruler hole of a suitable diameter.

Sepals pattern. To do this, cut out a square with a side of 6cm. Find the middle and divide it into 5 parts using a protractor. Angle = 72 degrees. 360:5=72. Draw lines 3 cm long, randomly draw sharp petals. No special precision is required.

Trace the template on green paper using a non-writing pen. Cut out. Make a hole in the middle with an awl. Cut each petal into a herringbone pattern.

Moisten the part and immediately curl the edges with your fingers, giving the workpiece a “shaggy” look.

Apply glue to the base of the flower and glue the part.

Preparing the leaves. Draw a rose leaf measuring about 3ms long and 2.5 cm wide. I selected the size of a real rose leaf and traced it.

Trace the template on green paper, fold the piece in three like an accordion and cut out the leaves. Then 2 more sheets.

Moisten the leaves, place them on a substrate and draw out the veins with a needle. Guide the needle at a slight angle from the sheet. Let dry.

Cut a strip about 20cm long and 2mm wide from a sheet of green paper. You can do it arbitrarily, so to speak, “by eye.” Glue it in half lengthwise (for rigidity), as in the photo.

Form a rose branch with leaves. Glue the leaves - one on the edge of the strip, the rest on the side in pairs. Only 5 leaves. You can have 3 leaves.

Cut a strip about 1 cm wide from corrugated paper and paste it over the stem of the rose, not forgetting to attach a twig with leaves. Instead of corrugated paper, you can use tape.

Thick colored paper can be replaced with whatman paper "Goznak" (it feels a little less dense to the touch) or watercolor paper (it is thicker).

Good afternoon. Today I want to show you the fastest ways to create paper roses. And give ready-made diagrams and templates for do-it-yourself paper roses. We will start with the fastest ways (that even a child can do) - that is, the lesson is suitable for kindergarten teachers and primary school teachers. And then we’ll move on to more complex techniques for making paper roses. You will also find here workshops on making large roses from paper, suitable for decorating holidays and wedding ceremonies.

Let's start making paper roses with your own hands. But first, let’s make a small digression and see what practical application your future rose crafts will find.

Paper roses

For all occasions.

Paper roses can decorate your gift wrapping. Moreover, you can make your own cardboard packaging with your own hands. Below I give a drawing of a box in the form of a piece of cake with paper rose cream.

You can use paper roses to serve the table at a romantic dinner, anniversary, or wedding.

Paper roses can become part of the festive decor at a wedding. Roses can become a bride's bouquet. Such a bouquet will be nice to keep for the friend who caught it.

You can give a bouquet of such roses to your loved ones and friends. Wrap it in music paper and decorate it with dew drops from ordinary Soviet SILICATE GLUE.

You can decorate a wall in your house with them or decorate a holiday. Run a wire along the wall and tie paper roses and leaves onto it.

THREE FAST WAYS

Make a rose out of paper.

For those who are in a hurry, at the very beginning of the article I include the three fastest ways to make a rose with your own hands from paper. These methods already have stencil templates. You need to quickly trace, cut and assemble the rose.

The first method is to string layers of rose petals onto string (or wire). Each layer is 2 petals (opposite in vector). Between them in the central roundel there is a hole made with a hole punch.

Here's the diagram. You can place a piece of paper directly on your monitor screen. The diagram will be visible on the surface of the sheet. Quickly trace the outline with a pencil. Cut them out - and now you have the blanks in your hands.

Now you need to do:

3 pieces of the first size,
2 pieces of the second size,
2 pieces of the third size,
and the middle part (No. 4).

I drew the middle part small, it didn’t fit on the diagram– you can leave it like this, or you can increase it. You can draw it yourself - in fact, it is an ordinary snail, one side of which looks like petals drawn by hand. Draw a spiral, snails, and then outline it with petal arches.

Or you can enlarge it on the screen MPa - to do this, press and hold the Ctrl key with one hand, and with the other hand, rotate the mouse wheel away from you (this will make the picture enlarge a little) - achieve the desired degree of magnification - and trace this enlarged part onto a sheet of paper.

By the way, you can tint the details with watercolors, walk through the browns of the petals - so that the rose has shades and halftones. This way it will look more natural.

The diagram for assembling a paper rose is shown in the photo below.

Step 1. First we string it onto the hole three big parts– we move them relative to each other so that the petals spread out in a circle. And we fix it with glue, glue the round middle parts of the part together.

Step 2. Then we string 2 pieces of second size– cross to cross, petals on 4 sides.

Step 5. On top of the glued rope we place our snail spiral, which can be slightly twisted in your hands and wrapped so that it fits into a petal twist.

Step 6. On top of this twist draw the center of the rose with a marker. Or glue bead. Or cut any paper stamen. Or roll it up crumpled piece of colored paper and insert like a paper bead in the center. That is, use what you have on hand.

Terry paper rose.

You can also take any shape of petals and also change their size to get a template for a new rose with your own hands. Here stencils for shaggy roses with uneven edges of paper petals.

Lush rose with rounded petals.

Here in the picture I painted over the petals specifically- as a hint that you can make a rose in which the color of the center smoothly flows to the edges - from dark pink to light pink, as happens with some varieties of natural roses.

You can increase the size of the template by pressing the Ctrl button on your keyboard and rolling the mouse wheel away from you (or towards you to reduce it).

And then place a sheet of paper on the screen and trace the translucent design with a pencil.

2 ways to make a rose

Made from crepe paper

We cut the paper into rectangles. Then we place these rectangles on top of each other with their corners (as in the figure below). Each time we put a drop of glue under the bottom - so that in this linear installation all the parts are glued to each other at the corners. As a result, we got a toothed tape.

In the photo, this rose contains candy inside. But this is optional. You can use a ball of crumpled paper. And so, around this lump we begin to wrap our jagged tape. As a result, we received a bud.

Now we need another toothed belt - but from semicircular parts. Tape with rounded teeth. We wrap the bud with this rounded ribbon of petals - and we get a plump, lush paper rose.

Here's another quick way to make a rose using crepe paper.

We fold the papers into even wide folds - so that they do not move relative to each other, we fasten them with a stapler.

We cut out a petal from this fold - large, medium, small - we get a pack of petals of each size.

We make blanks from green crepe paper.

We make a cocoon around the wire from a strip of crepe paper. When the cocoon is thick, we begin to shape the petals - we spread each one with glue in the lower part.

We start with small ones, move to medium ones and end with large ones. We get a lush paper rose from crepe corrugated paper.

As you can see, a rose is also quickly and easily obtained. A good way for those who have stocked up on crepe paper.

From the manner of arranging rose petals, and it depends on their shape, what kind of rose you will get. Here in the photo below we see roses, also created in the same way– but they look a little different. Because the shape of the petals is different.

In nature, there are a variety of roses - you can see that they differ in the shape of their petals. You too can develop your own varieties of roses from crumpled paper. If each petal is crushed, squeezed at its top, then we will get a new rose bud, a half-closed, rumpled terry variety.

Well, now let's move on to the painstaking techniques of creating a paper rose. There will be more complex, less fast ways to make a paper rose. But this is only for the first time. Once you gain experience, you will be able to twist such roses with closed hands - quickly and without fuss.

Paper rose

FROM TWISTED STRIP.

If you take an ordinary STRAIGHT strip of paper, you can wrap it in a rose. Just start wrapping it around the toothpick. First we make the winding with a regular roll. And then we continue to wrap the paper tape around itself with a TWIST.

That is, the tape simply twists - with an oblique bend. We make twists as we wrap the ribbon around the stick.

Take any unnecessary sheet of paper (draft) right now, cut a strip and try to twist it like this. Practice a couple of evenings - and one day you will figure out exactly how to twist the ribbon in the BEAUTIFUL way - how often to make twist turns, at what angle.

And also – using the same technique – you can also fold a rose from a straight strip of CREPE PAPER. Fold the long strip carelessly along in half. And wrap it around the base stick in the same way. It will work out lush delicate paper rose.

Ball-trees in a pot are decorated with such roses. A foam ball is covered with crepe roses and stuck into a pin sticking out of a flower pot.

Here is a rose twisted from a red and green napkin. Fast and easy.

Paper rose

SPIRAL METHOD

(and 4 of its varieties)

You can take not direct strip of paper - and spiral paper strip. And then we will get a new rose model. Like this one.

But this model is complex - it’s a bit difficult to twist and glue it. There is nothing for ordinary pva glue to cling to - although it works, you need to hold it with your hands for a long time. It is best to use glue from a hot gun in this model - then the work will go faster.

Here is a master class that shows how to make such a rose from paper. On a sheet of cardboard we draw a spiral-snail. Cut it out. And we begin to twist it around the stick. PLEASE NOTE the twisting does not start from the middle end - but from the edge.

This method of making a paper rose there are modifications- that is, slightly modified options. Let's look at them.

Modification of the spiral method No. 1 – PEAL.

We start twisting and assembling the rose in exactly the same way - not from the central edge of the spiral - but from the outer edge.

The arches of the petals on such a spiral rose DO NOT HAVE TO BE ROUND. You yourself can change the shape of the edge and get new varieties of paper roses.

For example, here is a template with jagged Jagged EDGES of pink petals. Or a rose with a sharp petal.

Modification of the spiral method No. 2 – SQUARE.

And here another modification of this method make a rose out of paper. Here our spiral is not round - but square - and even with uneven edges. And this is the rose that comes out of it. Uneven as if alive, recently blossomed wild Rose.

Modification of the spiral method No. 3 – ADDITIONAL PETALS

And here is a spiral rose, which is pasted around the edges with lush convex petals.

Step 1. Making a spiral rose. This will be the middle of our future lush rose.

Step 2. We prepare flat petals - 4 pieces of each size (small, medium, large).

Step 3. Cut each petal at the bottom. And we place the edges of the cut on top of each other, on the glue. This is how the petals become convex.

Step 4. Cover the rose with petals, first smaller ones, then larger ones.

Modification of the spiral method No. 4 – LACE

And instead of a spiral shape, you can take a ROUND one. And also roll the round strip into a rose.

And to make it more elegant, you can take this round strip from a lace paper napkin, as in the photo below.

You can also cut the same rose not from paper - but from felt, or even from a fluffy washcloth.

PAPER ROSES

From toilet paper rolls.

Here is a master class where a rose is made from recycled cardboard.

Step 1. A six-petal template is cut out of plain paper using the snowflake method. That is, we fold a square sheet as for a snowflake and cut it in a semicircle). We unfold it and get a flower.

Step 2. Cut the toilet paper rolls, flatten them on a wet towel - press them, then dry them

Step 3. We transfer the template to the sleeve paper - then we roll up the rose. The first layer is in a tight bud. We design the other layers as lush rose petals made of paper.

ROSES FROM PAPER

SNOWFLAKE method.

I called this method a snowflake because the beginning of creating such a rose coincides with the beginning of cutting out a snowflake from paper. Here, too, you need to fold a sheet of paper into four, and then into a triangle. And cut out a semicircular module from it - when you unfold it, you get an octagonal flower.

Cut out 4 octagonal flowers. These will be 4 tiers of our future rose. Each tier needs to be changed.

In the upper tier we remove 4 petals with scissors (4 remain)
In the second tier we remove 3 petals (5 remain)
In the third tier we remove 2 petals (6 remain)
In the fourth lower tier of the rose, remove 1 petal (7 remain)

Now you need to glue these trimmed flowers into cups - to do this, we place one marginal petal on the second marginal petal - with glue. We get cups - 2 petals, 4 petals, 5 petals, 6 petals.

We bend the petals of each cup using a round pencil. We put the cups on each other. At the bottom we glue a green paper bottom to them - they are attached to it with glue.

We fold the leaves into a fan. Forming a flower.

And using exactly the same method you can make a rose from the same roll of toilet paper.

In this way you can create any type of paper rose. With torn petals, with round petals, with pointed ones.

Large paper rose

TECHNIQUE OF INDIVIDUAL PETALS.

You can make a large rose - where each petal is the size of an A4 sheet. We buy colored office paper – a whole pack. We cut the petals into different sizes. We make each petal convex - for this we make a cut in its lower part with scissors - and glue the sides of the cut overlapping each other.

Then we collect the colors on a round paper base. We cut a folded sheet of paper into a fringe - and roll it into a roll - YOU RESULT IN A stamen of a rose.

Depending on the shape of the petals, you can get different shapes of paper roses. Below you can see how your imagination can create new pink flowers.

The same color of paper can create an interesting composition of roses if all the flowers are of different shapes and sizes.

Here are some ready-made templates for such large paper roses. YOU can come up with your own petal shapes. And see what comes of it in the end.

In such roaa it is not necessary to make a TWICE STAMINA. Can be done spiral rose center(lesson earlier in this article).

Or you can make the middle in the form of a DENSE BUD. In the master class below we see just such a rose. And you can see How exactly is such a boot assembled? it is made of a cross-shaped petal shape . Each side has a cross and rises up and crumples into a bud.

You can make a large rose for a beautiful photo portfolio. Buy a pack of pink office paper and collect your own unique paper rose - so big and lush.

And from the scraps of this office paper make the roses smaller. They can decorate the holiday table. Or paste over the mirror frame. Use as decor on gift wrapping. You can also make an artificial bouquet from these paper roses.

Moreover no matter what shape you have leftover scraps of paper. To make such a rose, it is not necessary to take petals of a SYMMETRICAL SHAPE. You can twist a rose from irregularly shaped petals.

Cut it out three petals in the shape of a heart(these will be the edge petals). We cut each of them at the bottom - and put the cuts overlapping each other - on glue.

And then we glue such convex petals to each other.

Three other half-shaped petals– we roll them into a roll – on top of each other. We glue the roll into the middle of our first three petals using strips of paper. We get a rose.

These are the ideas for paper roses that I have collected in this article. Now you have become an expert in this matter - and you understand perfectly well that you can do all this with your own skillful hands. So get down to business and let your world bloom with lush roses of happiness.

Happy paper roses.

Olga Klishevskaya, especially for the site

If did you like this article
And you want to thank our free author for this painstaking work,
then you can send any amount convenient for you
on his personal YaD wallet - 410012568032614

The rose is, without a doubt, one of the most beautiful flowers in the world, which is why it is very popular.

A paper rose is no less attractive than a real one, and the fact that you make a beautiful flower with your own hands, makes the rose even more meaningful to the person you give it to.

Learn making a paper rose is not difficult. There are many ways to do this, and you will learn about several from us.

How to make a rose with your own hands. The easiest way.

You will spend very little time on the rose in this example, but will get a lot of pleasure. Such flowers can be used as decor in an apartment or as a symbolic handmade gift.

You will need:

Thick paper

Scissors

Beautiful vase

1. From thick paper you need to cut out a square measuring 10x10 cm.

*The color of the paper depends on the color of the rose you will be making.

2. Draw a spiral on the square (see picture).

3. Cut out the drawn spiral.

4. Start rolling the paper spiral starting from the outer end.

5. Screw the bud tightly to the end and glue the inner end to strengthen the structure.

The rose is ready, and you need to start making leaves for it.

6. Cut out a leaf and glue it to the rose.

To make the rose look more chic, place it in a beautiful vase.

How to make a paper rose. Method II

You will need:

Thick paper

Scissors

Glue (adhesive tape)

1. Fold a sheet of A4 paper in half, and then in half again.

2. Now you need to cut the sheet into 4 strips. To do this, unfold it and cut along the folds.

3. Use duct tape to hold the cut strips end-to-end together, creating one long strip.

4. The strip that you have obtained needs to be twisted so that you get a rod-trunk (see picture).

5. You now need to fold the remaining part of the paper in half, while slowly turning it around the center (see picture). Continue wrapping and gathering layers until you have a rose.

*If you wish, you can paint the rose with your favorite color if you made it from white paper.

How to make a rose. Method III

You will need:

Crepe paper (red and green)

Stick, skewer or wire

Pencil

Scissors

Floral tape or glue

1. Make a heart shaped template. The size of the template depends on the size of the flower. In this example, the height of the heart is 15 cm.

2. Cut out 5-6 hearts according to the template.

3. Making a stem. Prepare 3 wires or a stick and wrap it with floral tape.

* Floral tape can be replaced with glue.

4. Making petals. Gently stretch the paper wide. Wrap the top edge of the heart around the round handle.

Wrap the first petal around the stem and secure it with ribbon.

Do the same with the remaining petals.

5. Making leaves. Prepare 3 wires and wrap them in crepe paper. Next you need to glue the leaves to them, which must be prepared in advance.

6. Making a rose cup. Cut a strip of green crepe paper.

Attach the strip to the base of the cup using adhesive tape (you can replace it with glue).

Attach leaves to the stem. Make one common stem and decorate it with green crepe paper.

Paper rose. Method IV

You will need:

Printable template

Printer

Scissors

Stick, toothpick, skewer or wire

Pencil

1. To make such a paper rose you need to download a flower template

Scheme on how to make a rose

2. After which you printed out the template, cut out the petals and leaves.

* Take a close look at the template, where all the petals and leaves are numbered.

3. Use scissors to bend the ends of the petals on both sides.

4. Three green leaves also need to be bent in half lengthwise.

5. Prepare a toothpick, thin wire, stick or skewer and twist petal number 1 around it. Use glue to secure everything.

6. Now around twisted petal number 1 you need to wrap petals number 2 and 3 and also secure with glue.

7. You need to glue petals 4, 5, 6, 7 together to make something similar to cones (see photo).

8. Collect and glue all the parts of the flower together!

You can find roses in other colors by clicking on the links below.

DIY paper roses. Method V

Like the previous roses, this one can be made in any color. The example shows the color red.

1. Prepare colored cardboard. Draw a spiral on it. Try to make the line that you draw from the center to the periphery not even, but a little wavy.

2. Using scissors, make a cut along the entire drawn line. You should get something similar to the peel of a peeled apple.

3. Now you need to wrap your spiral around your pencil. Try to wrap tightly until you reach the middle. After this, you need to remove the pencil and let the flower straighten out.

* Using your fingers, you can try to slightly bend the paper petals in the central part.

4. Apply a lot of glue in the center and let it flow into the central part of the spiral. In order for the glue to set well, you need to press the entire structure to the bottom.

DIY corrugated rose

You will need:

Corrugated paper (pink and green)

Scissors

Wire (straightened paperclip or skewer)

1. Prepare pink or red corrugated paper and fold it several times, first lengthwise and then widthwise.

2. Using scissors, cut out what looks like double petals, shaped like hearts. In this way, you can make 8 petals at once with one cutout.

* In the video, the petals are simply cut out of paper, but you can first draw them on it and then cut them out.

3. Each group of petals should be slightly crushed to give more naturalness. You can stretch it by pressing your fingers into the middle part.

4. Now you need to cut a strip 3 cm wide from a roll of corrugated paper (choose the length yourself, based on the video tutorial). Apply glue along the strip.

5. At one end of the tape you need to put a short length of wire (you can replace it with a straightened paperclip or skewer) and wrap the entire strip around it. This way you will get the core of the rose. It is to this that you will further glue the petals.

6. All that remains is to apply glue to the petals and attach them to the central part.

7. At the final stage, you need to make leaves from green paper. To do this, fold the green crepe paper in half and half again, and cut the shape of the petals as shown in the video.

* In the video, a foam rubber strip is pressed against the wire, and then green paper is wrapped around the wire along with the foam rubber.

Origami rose Kawasaki (video)

This method of making a paper rose was invented by Kawasaki, after whom it is named.

How to make a rose from a napkin (video)

Origami rose from a napkin (video)

Good day!

Spring time is coming and you want warmth and more love. The February holiday is behind us, which means that your defenders have received from you. Now it’s the women’s turn, and usually each of us is waiting for something unexpected on the eve of March 8th. Beloved men will primarily present luxurious bouquets. And our children will help them with this, make beautiful roses in labor lessons or in kindergarten.

Today we will look at just such crafts that will be made of paper. If you want to please your mom or grandmother not only on International Women’s Day, but for example on a Birthday or Mother’s Day, then visit me in another post, where you will see many other delicate flowers. And you definitely won’t resist and create such a magnificent gift.

After all, a rose is a royal flower, and it is very popular with everyone, especially on days of significant events. You definitely can't argue with that.

Many people will probably think that it is difficult to make such gifts on their own, but you are wrong. It turns out making paper roses is quick and easy. And step-by-step instructions and descriptions with pictures will help you with this.

So, what are you waiting for, get to work.

How to make roses from corrugated paper quickly and easily? Step-by-step instruction

I think that the first work should be shown with a template, cut it out of cardboard or thick paper, and then attach it to the corrugated material. At the same time, roll the corrugation like this, as shown in the picture, to make a strip. Then roll it up like an accordion, outline the shape of a petal and cut it out.

To make a stencil like the one shown below, you need to hold a piece of white office paper to your monitor and draw the image.

This is such a funny picture. It's like petals on a branch. Take any stick or you can take a pen rod (wire) and start twisting clockwise until you get a rose.

The more petals, the more magnificent the flower.

As soon as you finish working with the bud, proceed to cutting out the leaves. Glue them on the wire, and also decorate the twig with corrugated paper of only green color.

The next option will be like this, even easier than the previous one, draw a semi-oval, only slightly flattened, or you can say a round petal. Fold the corrugated paper like an accordion and trace over the stencil. Cut and twist in a spiral.

Roses using the origami technique without glue and scissors (step-by-step diagrams for beginners)

A rather original way to make a rose is to use a regular pencil and a stationery knife. Draw a spiral on a piece of paper and run a knife along its contours. And then, starting from the middle, twist it onto a stick into a flower.

As you can see, any beginner can cope with this work; it is easy and not complicated.

Below I want to show you some ready-made templates so you can use them to build this beauty. So as not to sit and draw on your own.

Now look at the next beauty, the rose is assembled from ordinary paper, or rather from a strip, by bending and twisting:

You can do approximately the same thing with crepe paper (corrugated), such beautiful roses are great to decorate a ball and the result can be a topiary.

You can also twist a rose using the origami technique, it also turns out very beautiful.

Templates for making large voluminous roses

Just four templates are enough, these are a petal, a heart and leaves for decoration:

The work steps are described in the illustrations, so I hope everything will be clear. If you have any questions, ask.

Paper rose from a napkin

Oddly enough, even an openwork napkin that we are used to using in the kitchen can be quite useful for such creative work. It is its ribbed openwork edge with a pattern that will help create such a pretty rose. Just a couple of strokes, cut as shown and twist into a bud.

The next option is made from a napkin, tear it into squares. You need to cut each piece into 4 parts.

Another option is a twisted flower, literally. You need to cut the napkin into two halves and twist each one onto a pencil, and then pull it off, in general, see this master class:

Master class on creating a bouquet of roses from sweets and paper

You can now find a whole bunch of such crafts on the Internet. I even have a whole one on my blog, but at the moment I want you to get acquainted with these flower bouquets, with candies hidden inside the buds. Use a video from the YouTube channel.

The easiest ways to make crafts in the form of paper roses

Well, now I propose to plunge into the world of fascinating souvenirs, while the process of making roses will be shown in pictures. And you can easily cope with such work. Choose any instruction you like and act according to it.

Roses can be made not only voluminous so that you can pick them up and give them as a gift, but it is also quite appropriate to make them and stick them on.

The most probably unexpected way is to take an ordinary newspaper and use it to make a craft in the form of a large rose.

Or use colored double-sided paper.

Here is another master class, if you are planning to decorate a gift box, for example, then it will help you with this. The rose looks cute and attractive.

Here are more leaf templates for cutting out.

The following ideas will be made from thick cardboard, or you can take a toilet roll and make such an unusual souvenir gift from it.

Or make your own flower from banknotes.

Well, or else, each rose petal can be signed with pleasant words, or

This is where I end the post and hope that you will learn how to fold roses, because as you may have noticed, all you need is paper and the desire to create. Good luck.

See you soon, see you in the group. Goodbye.

Best regards, Ekaterina

The Queen of Flowers has always attracted attention and was a welcome gift and decoration. Poems and legends are written about it, and gorgeous bouquets are made from it.

Many needlewomen are interested in how to make paper roses with their own hands. Creating this flower will require more time and skill than making simple plants.

Let's consider several options for making an amazing flower.

Chic bouquet as a gift

On the cardboard we draw a spiral-shaped corolla with a pencil. Then we take scissors and cut out the template. The result should be a spring. The pattern is used to obtain blanks from colored material.

You should prepare the wire for the peduncle in advance. A little glue is applied to the edge of the future stem. The required number of buds is made, and then the bouquet is decorated.

exquisite flower

Fold the square of the selected shade in half diagonally. Then a petal is cut out from the resulting triangle. Having unfolded it, the master will see that the result is a corolla with 8 petals.

You should make 4 blanks. Each detail must be finalized by cutting off 1, 2, 3 and 4 petals, respectively. The corollas are glued so that the outer elements are fastened together.

The result will be parts with 2, 4, 5 and 6 petals. Using a pencil, the edge of each of them is slightly bent. Then the bud is collected. Leaves are cut out of green material and glued to the bud.

Corrugated paper rose

An original decoration will decorate the interior of any home. Interesting photos of paper roses will allow you to find your own option for creating beautiful compositions.

For the corrugated version, you will need green and red material, tape for the stem, wire, and scissors.

Five elements in the form of drops and 15 parts in the shape of a heart are cut out. The blanks are carefully stretched along the edges. The bud is formed by gluing the petals one by one.

The elements are fixed using adhesive tape. The product is complemented with green leaves that are attached to the stem of the plant.

Now a novice craftsman will understand how to make a rose from corrugated paper. Based on this product, other options can be obtained. To do this, simply slightly modify the pattern of the petals.

Beautiful flower made of colored paper

The sheet is cut into strips of 1 cm. The width determines the size of the future souvenir. The edge should be bent diagonally, twisting the rose.

The bud is held together with glue during the manufacturing process. Several plants of the same or different colors allow you to create unique bouquets to decorate your home.

Rose made of money

For a souvenir you will need printed banknotes. To get a neat product, you need to follow the step-by-step instructions for making a paper rose. The sheet of material is folded in the center and tied with wire, having previously turned in the corners.

You need to make 4 parts, which can then be easily connected into a bud. The wire is twisted, resulting in the formation of a plant stem.

Big rose

The following materials will be used in the work: corrugated paper, wire, tape, glue.

Draw the pattern templates yourself by observing real plants. You can print ready-made patterns, cut them out and transfer them to cardboard.

A life-size paper rose looks unusual at any celebration. If you create several copies, you will get a huge bouquet.

For one product you will need 15 heart-shaped elements and 5 drop-shaped elements. The resulting petals must be given the desired shape. The hearts are stretched a little, and the droplets are rolled onto a pencil.

Two pieces of thick wire are wrapped with special adhesive tape. Then a bud is formed. A sepal is placed at the base. The leaves are alternately attached to the stem using tape.

Royal Rose

For a beautiful accessory you will need napkins of different colors, ribbon, and a regular pencil. This simple method will allow you to create an original gift.

The napkin is wound around the pencil. It needs to be compressed. After this, the pencil is pulled out. The result should be six finished parts, which are held together with tape. Then a corolla of 6 petals is formed.

Crepe paper flowers

This material is very similar to corrugated paper, but it is softer. The result is more delicate artificial plants.

The basis for making souvenirs from this material is twisting. This option is ideal for beginners.

You need to take a 5 cm wide tape and scissors. To fasten the bud you will need glue. The tape is folded and the corners are cut off from one edge to form a petal.

Then the process of winding onto a pencil begins, resulting in the formation of a corolla. Several blanks can be used for beautiful crafts or gift decoration.

Conclusion

Simple flower making techniques help beginners master the technique of making paper flowers. This is an amazing hobby that adults and children will enjoy.

Using different patterns, large and small flowers, paper rosebuds, and life-size products are produced. They will make a great gift for a birthday or other holiday.