Gas electrolux gwh. Reviews of Electrolux geysers

Geyser Electrolux GWH 265 ERN NANO PLUS - a geyser with electronic ignition of the burner is easy to use. The burner ignites automatically when the tap is turned on hot water, then the heating power and water temperature are regulated using ergonomic knobs on the front control panel. The presence of flame is monitored by an ionization control unit. The productivity of the NanoPlus geyser is 10 liters per minute.

In this model, the gas burner is made of high quality stainless steel. In the model Geyser Electrolux GWH 265 ERN NANO PLUS, the chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.

Heat exchanger

In geysers Geyser Electrolux GWH 265 ERN NANO PLUS heat exchanger is made of oxygen-free copper high quality using OXYGEN FREE technology, which maximizes its resistance to oxidation and exposure high temperatures during operation and does not require the application of any additional protective layers.

The heat exchanger in NanoPlus geysers does not contain lead and tin, which indicates its safety for human health and environment, as well as high reliability and durability.

Digital display

On the control panel of the geyser Electrolux GWH 265 ERN NANO PLUS geyser there is a modern digital LCD display with intelligent control. The display shows the water heating temperature, as well as various functions of the column: indication of the presence of a flame on the burner and the presence of water circulation in the heat exchanger, indication of the charge level of the batteries for ignition. If the charge level is insufficient for ignition, the battery icon will flash, indicating the need to replace it.

Multi-level security system

The first level of the security system is a traction sensor. It is triggered when there is no draft in the chimney or reverse draft appears, turning off the gas supply. The second level of the security system - a protective thermostat protects the column from overheating. The third level of safety - the hydraulic safety valve is designed to control the circulation of water in the heat exchanger. This protects the geyser from overheating. The fourth level - flame ionization control controls the presence or absence of a flame on the burner. The intelligent control system controls the operation of all sensors. If any malfunctions or errors occur in the operation of the column, an error code is displayed on the LCD display, which is very convenient when servicing and operating the device.

Operation at low gas pressure

Gas water heaters Electrolux are designed taking into account the peculiarities of work in Russia, Ukraine, Kazakhstan, Belarus and other countries post-Soviet space, where the pressure of gas and water in the mains is sometimes quite low. The minimum water pressure to turn on is 0.15 bar, gas pressure is 13 mbar.

2 year warranty

Description of the geyser Electrolux GWH 10 NanoPlus 2.0

Instantaneous water heater Electrolux GWH 10 NanoPlus 2.0— extremely easy-to-use gas water heater with electronic ignition. The burner ignites automatically when the hot water tap is turned on, then the heating power and water temperature are regulated using ergonomic knobs on the front control panel. The gas burner is made of high quality stainless steel. The chimney diameter is 110 mm, which makes it possible to connect to almost any exhaust system.

Heat exchanger

In NanoPlus geysers, the heat exchanger is made of high quality oxygen-free copper using OXYGEN FREE technology, which maximizes its resistance to oxidation and high temperatures during operation and does not require the application of any additional protective layers.

Digital display

The control panel of the GWH 10 NanoPlus 2.0 gas water heater has a modern digital LCD display with intelligent control. The display shows the water heating temperature, as well as various functions of the column: indication of the presence of a flame on the burner, indication of the battery charge level for ignition, etc.

Multi-level security system

Advantages of the Electrolux GWH 10 NanoPlus 2.0 geyser

Temperature setting accuracy - 1ºC
Digital display with backlight
Indication of switching on, heating temperature, battery charge level
Flame presence control (turns off fuel supply)
Chimney draft sensor (turns off the gas supply)
Protection against switching on without water
Overheat protection
Electronic ignition
Electronic control
Heating temperature adjustment
Pressure safety valve
Stainless steel burner
Heat exchanger material - oxygen-free copper
Universal chimney diameter

Geysers Electrolux GWH 275 SRN - geysers with piezoelectric ignition of the pilot burner and automatic heating temperature control.

Specifications

Design

The GWH series water heater has a multi-level security system.
The first level of the security system is a traction sensor. The sensor is triggered in the absence or appearance of reverse draft, turning off the gas supply to the main burner.
The second level of the safety system is a thermocouple, which automatically stops the gas supply when the pilot burner flame goes out.
The third level of safety is the hydraulic safety valve, which is necessary to ensure that gas only flows to the main burner if water is circulating in the heat exchanger. This protects the geyser from overheating.
A modulating burner automatically adjusts the flame height when pressure drops in the water supply system and increasing water flow, thereby ensuring the desired heating temperature.
Electrolux gas instantaneous water heaters are equipped with a copper heat exchanger.
The heat exchanger is made of electrolytic copper, a design that prevents scale formation, and a special coating protects the heat exchanger from high temperatures.
The burner in Electrolux water heaters is made of high-quality stainless steel, which significantly increases its service life.
The column is turned on automatically when the tap is opened hot water, thanks to an electric spark from the batteries. After closing the hot water tap, the pilot burner flame automatically turns off. The absence of a pilot burner flame significantly reduces gas consumption.
The Electrolux GWH series gas water heater can operate in one of two modes - more economical or more powerful.
The chimney diameter is 110 mm, which makes it possible to connect the water heater to almost any exhaust system.
True European quality based on modern technologies, perfect water heater design and high level security allows for reliable and stable operation.

Distinctive Features

piezoelectric ignition
modulating burner
multi-level security system
two heating power modes
°C temperature increase by 25-50
thermostat on the front panel
ease of use
modern design
long service life
chimney diameter 110 mm

Installation

When installing the water heater, leave free space: 50 mm on both sides, 150 mm on top, 150 mm on the bottom and 300 mm from the front panel. The device is placed on the wall and connected to the gas pipeline and cold and hot water pipelines. The geyser can be connected to almost any exhaust system.

Application

Electrolux GWH 275SRN is designed to quickly and reliably solve hot water problems when working on natural gas with a pressure of 13 mbar and water pressure of 1-10 atm.

Quality assurance

The gas water heater has certificates of compliance with the requirements regulatory documents GOST

Electrolux has been present on the Russian market for several decades. But previously it was known to our consumers, mainly due to its high-quality household appliances. Refrigerators, washing machines, electric water heaters and microwave ovens from this famous Swedish manufacturer have long won respect not only among Russian consumers, but throughout the world.

And so, relatively recently, the company began supplying to the market, in particular, geysers Electrolux, reviews of which are both positive and negative. Let's try to disassemble this gas water heater, using the Electrolux GWH 265 ERN Nano Plus model as an example.

We will try to find the advantages and disadvantages of this model, understand the principle of operation by considering its technical characteristics and design. Based on these operating instructions, everyone will be able to draw conclusions and formulate their own reviews about the Electrolux gas water heater, which can now be purchased inexpensively at a low price.

Features of Electrolux geysers

One of the first models to appear on the market was the Electrolux GWH 275 SRN, the reviews of which were very good from owners and specialists, mainly due to its high-quality European assembly (Spain). IN recent years the company supplies two models to the Russian market: Electrolux GWH 285 ERN Nano Pro and Electrolux GWH 265 ERN Nano Plus automatic.

Geyser Electrolux Nano Plus

Both models are equipped with automatic ignition from batteries installed in a special compartment and a gas control system. These geysers are assembled in China, and components are supplied from Europe. Visually, the Nano Pro model has an on/off button for the device and two knobs for adjusting the temperature and water flow.

The Nano Plus model differs in appearance from the Nano Pro in the presence of an informative digital LCD display on the control panel. It displays the water temperature at the outlet of the water heater, there are indicators of flow and battery charge level, which flashes when the geyser does not turn on when the water is turned on.

The display shows errors in the operation of the Electrolux gas water heater of the Nano Plus model, for example:

E0 - emergency hot water temperature sensor triggered;
E1 - low battery charge level;
E2 - the emergency flame sensor has tripped.

Operating principle of a gas automatic water heater

When we open the hot water tap on the mixer, the water flow sensor is automatically activated. After half a second, the information display will turn on, showing 2 indicators blue: “battery” and “shower”.

After a few seconds the flame indicator will light up. After turning on the gas burner, all indicators light up, except for the battery indicator, which now simply shows their charge level.

When we stop using hot water, turn off the tap. The flow sensor cuts off the gas supply to the gas burner of the column, all indicators turn off. Only error codes can be displayed if the device malfunctions.

Display of the Electrolux Nano Plus geyser

Electrolux geyser device

Like most gas instantaneous water heaters, the Electrolux GWH 265 ERN NanoPlus geyser consists of gas and water units, a heat exchanger for heating water, a gas burner with stainless steel nozzles and an open combustion chamber.

A special feature of the Electrolux Nano Plus model is the presence of a copper heat exchanger that is safe for human health, does not contain oxygen and lead, and is made using special technology. Oxygen Free.

Let's take a closer look at the diagram to see what else can be found under the body of this device.

Electrolux geyser device

1 - gas part solenoid

2 - hot water outlet

3 - water temperature sensor

4 - LCD display

5 - threaded fitting for connecting the bellows

6 - fitting for draining water

7 - electrode for igniting the burner
8 - flame ionization electrode

9 — column electronics unit

10 - open combustion chamber

11 - sensor for protection against overheating of combustion products

12 - emergency hot water overheating sensor

13 - heat exchanger

14 - gas burner

15 — rod with water unit membrane
16 - the water unit itself
17 - double case for batteries
18 — entrance cold water
19 - gas part
20 - pipe for monitoring gas pressure

Geyser Electrolux NanoPlus: technical characteristics of the water heater

The rated power of this model is 20 kW, and the hot water output is 10 l/min. The water heater can turn on at a water pressure in the pipeline of 0.15 atm, which is a good indicator compared to models of the previous generation of Electrolux gas water heaters.

The chimney diameter is 110 mm, and the dimensions of the device are very compact: 55 x 32.8 x 18 cm. The diameter of the pipes for connecting gas, cold and hot water is 1/2 inch. It is possible to switch the operation of the device from natural gas to bottled (liquefied) gas.

In addition, this water heater has a built-in burner flame modulator, unlike, for example, its direct competitor - a geyser. This function allows you to set the desired water temperature. We set it once, and the device itself will maintain the temperature we set. Other parameters and characteristics are indicated in this table.

Technical characteristics of the Electrolux Nano Pro model

Possible malfunctions of the Electrolux geyser and their elimination

1. The speaker does not turn on.

The batteries may need to be replaced or they may be inserted incorrectly; pay attention to the polarity of the batteries.

2. The outlet water does not heat up well and is not hot enough.

Try reducing the flow of cold water into the column or increasing the gas supply.

3. There is a smell of gas in the kitchen or apartment.

There may have been a gas leak in the gas pipeline. In this case, you should not look for the cause of the gas smell yourself; be sure to contact a gas specialist.

Advantages of the Electrolux GWH 265ERN Nano Plus geyser:

- compact size
- environmentally friendly copper heat exchanger
- stainless steel burner
— smooth burner modulation
— low price from 8500 rubles
- famous brand

Disadvantages of Electrolux geysers:

- Chinese assembly
- low performance
- narrow model range
- difficult to find spare parts

Generally, Geyser Electrolux Nano Plus is worth the money, despite different reviews. It is modern, has all the necessary functions and good technical characteristics. If you are not bothered by the Chinese assembly and its low performance, then you can safely buy an Electrolux GWH 265 ERN Nano Plus gas water heater in stores in your city. Let's watch the video review.

Technical characteristics of the geyser Electrolux GWH 350 RN

Power range: 14.6-24.4 kW
Ignition: electric
Water flow: 7.0-14 l/min
Chimney diameter: 125mm
Overall dimensions: 722x350x256mm
Weight: 13.3 kg

Distinctive features of the Electrolux GWH 350 RN geyser

Automatic temperature control
The column turns on automatically when you open a hot water tap.
copper heat exchanger made using Exothermic technology
constant electronic monitoring and analysis of gas water heater operating parameters
temperature increase by 25-50°C
constant control of exhaust and minimal emissions of gas combustion products

Security systems for geyser Electrolux GWH 350 RN

draft sensor - instantly turns off the gas supply if there is no flue gas draft or reverse draft appears
thermocouple - gas shutdown in the absence of flame
ionization flame control - monitors the presence of flame
hydraulic valve - gas supply to the burner only when there is water, protects the gas water heater from overheating

Delivery and payment

Our couriers deliver to homes, offices, apartments and transport companies in Moscow and the Moscow region.

Delivery in Moscow:

The standard cost of delivery by courier within the city within the Moscow Ring Road is 450 rubles.
Orders are delivered from 10:00 to 18:00 on weekdays. Evening orders are discussed individually.

Delivery outside the Moscow Ring Road:

The cost of delivery by courier is 20 rubles - 1 kilometer, plus delivery is 450 rubles in Moscow.
Orders are delivered from 10:00 to 18:00 on weekdays.

Pickup:

You can independently pick up the product you like at our office at the address: Moscow, st. Baikalskaya 1.
Before arriving at the company’s office, it is mandatory to confirm the availability of goods in the warehouse!

Delivery throughout Russia

Delivery is carried out by transport companies - auto, air or by rail from Moscow to any region of Russia. Delivery times and costs may vary depending on the delivery method you choose. The cost of delivery by region also depends on the weight and volume of the equipment you order. We recommend that all our regional customers do the following:

Having selected the product you are interested in, place an order for it on our website.
In the "Comment" column, indicate your wishes regarding the order, if any.
After placing your order, our manager will contact you and discuss the details of payment and delivery.
After confirmation of payment by our bank (24-48 hours), in case of payment by electronic money, the funds immediately arrive in our account, your order will be sent by a transport company.

When receiving the cargo at the destination, you must:

Have your passport with you for individuals or a power of attorney (seal) from the recipient company, if the order was placed for an organization.
Check the quantitative correspondence of the actually issued cargo and that indicated in the waybill.
Check the integrity of the packaging, the presence and integrity of the adhesive tape with the markings of the carrier company, and the absence of mechanical damage to the cargo packaging.
In case of detection of the above damages, it is necessary to draw up a report or claim to transport company and notify the online store manager about this.

Cash

This payment method is available in our office in Moscow or for delivery throughout Moscow and the region; for organizations it is mandatory that the recipient of the order has a power of attorney or a seal of the organization. Cash receipt You will be able to receive it in our office or by mail after completing your order.

Bank transfer

Payment by Sberbank card. The most popular payment method outside the Moscow region. You can pay at any branch of Sberbank of the Russian Federation or other banks providing such services, as well as at Russian Post branches.