Where is the apostrophe located on the English keyboard? Where is the apostrophe on the keyboard?

This article outlines one of the ways to quickly insert special characters into text for which there are no keys on a standard keyboard (apostrophe, accent, second degree, third degree, degree sign, ppm sign, etc.).

Having mastered these simple techniques, you can significantly increase your typing speed, raise the level of comfort and productivity of your work by computer. The method below is suitable for text editors Microsoft Word, Wordpad and many other programs.

The essence of the method is that each special character has its own code. To insert a character into the text, you need to press the button Alt, and while holding it, dial this code on digital buttons located on the right side of the keyboard. The symbol will appear after you release the Alt key. The language of the keyboard layout does not matter.

I highlighted the word “digital” in bold for a reason, since it will not be possible to enter the symbol code using the buttons located at the top of the keyboard. You need to enter using the keys located on the right side of the keyboard. In order for them to work, it is advisable that the keyboard has NumLock. By default, it is always enabled. Otherwise, it can be easily activated by pressing the "NumLock" key.

Now I suggest you experiment. Open Wordpad or Word, and while holding down the Alt key, enter the code 0169. Release Alt. A copyright symbol will appear. Similarly, you can insert a huge variety of special characters into the text. The codes for the most frequently used ones are shown in the table below:

No.	Symbol name	Character code	What does the symbol look like?
1	Apostrophe (very relevant for Ukraine)	39	elm
2	Accent mark	769	emphasis
3	Degrees	0176	40°
4	Permille sign	08240	‰
5	Second degree	178	2²
6	Third degree	179	2³
7	One fourth	188	¼
8	One second	189	½
9	Three quarters	190	¾
10	Not equal	8800	≠
11	Almost equal	8776	≈
12	Less-equal	8804	≤
13	More-equal	8805	≥
14	Plus or minus	0177	±
15	Ampersand	038	&
16	Paragraph	0167	§
17	Euro	08364	€
18	Copyright sign	0169
19	R trademark sign	0174	Chaynikam.Info®
20	TM trademark sign	0153	™Chaynikam.Info

Editing text often raises certain questions even among advanced PC users. For example, someone doesn't know how to insert some characters. The “comma on top” sign has become very popular. It is commonly called an apostrophe. How to put a “comma on top” on the keyboard and more? Below we will present the most common and convenient methods of bringing your idea to life. Even a schoolchild is able to remember and master them. Therefore, there should not be any special difficulties.

Types of commas

When thinking about where the “comma on top” is on the keyboard, the user should understand that apostrophes come in different forms. And therefore there is no clear answer to the question posed.

On at the moment you can find a regular apostrophe. This is a comma, the tail of which “looks” in one direction or another.

You can work with a slanted apostrophe. This is a comma that is placed above a character slanted strongly to the right. Often found in English texts.

In addition, the “comma on top” can be double. This symbol is usually called double quotes. We'll talk about them too.

Standard apostrophe seal

How to put a “comma on top” on the keyboard? It’s worth starting with the most common scenario. We are talking about printing a single “slanted” apostrophe.

In this case, you will have to perform the following manipulations:

Switch keyboard layout to English.
Place the cursor in a particular place in the text.
Press the button with the letter “E”.
This algorithm can be repeated as many times as the number of characters required by the user. The reception does not cause any real difficulties.

Italic apostrophe

How to put a “comma on top” on the keyboard? The following technique will help you install a slanted apostrophe. The user will not need any skills or abilities to complete the task.

The instructions for installing the corresponding symbol have the following interpretation:

Switch the language to English.
Press the button with the letter “E”.

There is no need to do any further manipulations. We found out where the “comma on top” is on the keyboard. What other ways are there to bring your idea to life?

Digital code

For example, you can use a non-standard solution. We are talking about using a digital character code. Using specialized combinations, the user can easily insert characters in the text that are not on the keyboard. And the signs on it too.

How to put a “comma on top” on the keyboard? You can use the following form of instructions:

Enable Num Lock mode.
Press the Alt button.
Type code 0146 while holding Alt.
Release the pressed keys.

The manipulations performed will provoke the writing of a regular apostrophe. This technique, as a rule, is not in great demand, because not everyone knows the combination responsible for printing the “comma”.

Inserting characters into text

We found out how a “top comma” can be placed on the keyboard. What needs to be done to easily print any types of apostrophes in the text? It's not as difficult as it seems.

Let's consider this action using the MS Word text editor as an example. The so-called special insert comes to the rescue. This operation allows you to easily print a variety of characters in text. For example, the icons " trademark"and more. The main thing is to find the corresponding symbol.

How to put a comma on top? There are only a few corresponding symbols on the keyboard. To install in the text all existing species apostrophes, you must do the following:

Go to MS Word.
Open the “Insert” menu item.
Select the line “Symbol...” or “Paste Special”.
A window with various symbols will appear on the screen. Among them, the user will have to find one or another type of apostrophe.
Double click on the selected element. It will appear in the location of the cursor installed in the editor.
Repeat the process as many times as necessary.

Double commas

The last tip will help you immediately put double quotes (or two “commas on top”). This method involves using the keyboard.

Here are instructions to help with installation double quotes as commas:

Press "Shift" and press the "2" button on the keyboard. We are talking about the key located above the alphabet.
Switch the keyboard layout to English, press “Shift”, and then press the letter “E”.
It's done. We have figured out the basic ways to print an apostrophe and double commas on top. Where is the top comma on the keyboard? Finding it is easier than it seems. The answer to this question will no longer confuse you.

Where is the apostrophe (") sign in the Ukrainian keyboard layout?

Previously, I switched to the English layout, but now I use the two from the top row of numbers - I hold Shift and press 2, I get this symbol. It's not exactly an apostrophe, of course, but that's what I use.

Of course, there is a way to put an apostrophe () on the Ukrainian keyboard layout. And this is quite easy and simple to do. All you need to do is hold down the keyboard shortcut ALT And 3+9 . I would like to note that there are other ways to make an apostrophe, but in my opinion, this is the simplest.

I apologize to spin, But in the Ukrainian layout there is an opportunity set it with one keystroke.

Except Alla Ivanovna 688 Quite long paths have been described.

There are several shorter ways:

1) Path to insert an apostrophe with one key. In Windows 7 (I don’t know about XP), in addition to the regular Ukrainian layout, there is also an extended one. In it, instead of a Russian letter, there is an apostrophe. To do this, you need to change the layout to extended in the language settings. It's done like this. Right-click on the language indicator, select Options, on the General tab select Ukrainian, Add button, check the box next to Ukrainian extended. Simply remove Ukrainian from the list.

2) Using Alt. Digital combination: Alt+39 (same as Alla Ivanovna) or Alt+8217. The Alt+8217 option is more reliable when converting to other formats.

3) Using Ctrl. Ctrl+ twice e or Ctrl+ twice tilde (aka the key).

May be useful:

Emphasis in Word:

A) Place the cursor to the right of the required letter, then Alt+769 or Alt+0769

b) To the right of the letter, type 0300 or 0301 and after typing, press Alt+X.

V) Instead of a) and b) in Symbol, assign a keyboard shortcut.

Accent in QuarkXPress: for uppercase (capital) Alt+0152 and Alt+0136 for lowercase.
Printing quotes - Alt+0171 and - Alt+0187
Printing dash Alt+150
Em dash Alt+151

To put an apostrophe with the Ukrainian keyboard layout, you can use a very simple key combination ALT+39. And since I am Belarusian and we also have an apostrophe in our language, you can choose the Belarusian layout, in which the hard sign ъ turns into .

To put the apostrophe sign () in the Ukrainian layout (as well as Russian) on the keyboard (in Word this is exactly the case), just press the keys CTRL+E(At least that’s how it is for me). In some versions of Word, you need to hold down CTRL and press the key with the letter E twice - Ctrl+ E, E(I don’t know why this is so). Of course, you can also switch to the English layout and simply press the key with the letter E, but this is time-consuming and not practical. Also, in the symbols (insert - symbol - desired symbol), find the one you need and insert, including the apostrophe. There are probably some others alternative options, but the combination of keys given above, in my opinion, is the most optimal, not requiring distraction from writing the text.

There is no such symbol in the Ukrainian layout. Not all characters can be typed by pressing one key. There just aren't enough keys on the keyboard for all the characters. But you can type any character if you know its code in the character table. To do this, you need to press and hold the Alt key and, on the additional (numeric) keyboard, type the number of the desired character and release the Alt key. The number of the apostrophe character in the ASCII table is 39. Therefore, to print an apostrophe, press the Alt key, hold it, press 3, then 9, release the Alt key. You can experiment with other symbols in this way. For many, the first 32 characters are especially interesting: ?,??????

If we're talking about O Word program, then everything is much simpler there. Open the menu insert -> symbol

A window will open. In this window, each character can be assigned its own key combination. There are also preset combinations for some symbols. They can be seen on the Special Characters tab.

In this tab we see that Microsoft has assigned the combination Ctrl+, to the apostrophe. To type an apostrophe in Word while pressing Ctrl, press the quot key twice; (Russian e there) and we get an apostrophe. If you wish, you can change this key combination.

I think that it is not possible to put an apostrophe using the Ukrainian keyboard layout, but there is another way, besides switching to the English layout, is to send the Symbol Table shortcut to the desktop and move it to the Quick Launch panel. If you need to put an apostrophe, you can quickly select it and insert it in the right place. Also, when selected, a code will appear (in this case, press Alt+0180), which you can remember and enter if you do not want to launch the symbol table.

I insert an apostrophe into text on the Ukrainian keyboard layout in the following ways:

1) Hold down the ALT key and type 0146 on the keyboard on the right (where num lock is).

2) You can simply press the CTRL key twice on the letter E.

3) You can simply switch to the English layout and insert the apostrophe as usual.

There are other ways to insert an apostrophe, but these are the three I like. And most often I use the second one listed. This saves me a lot of time because this method is the fastest and easiest to remember.

What don’t you like when switching to English, and then it’s already done? But time is money.

I can advise that I have tested it myself in practice.

Hold Alt+3+9. We enter numbers on the right layout, and do not forget to turn on Num Lock, otherwise you will not succeed.

For those who work in Microsoft Office Word, you need to use all keyboard functions, including symbols. Symbol " apostrophe» is used quite often by some authors of texts. But what should such an author do if he continuously types text in the Cyrillic keyboard layout, and this character is in a different layout. Continuously switching keyboard layouts takes up precious time, which a modern writer sometimes lacks. How to put apostrophe without switching keyboard layout?

You will need

Computer, keyboard, software Microsoft Office Word.

Instructions

1. In order to start working with a text editor, you need to launch it. This can be done using the following method: click the “Start” menu – select “All Programs” – “Microsoft Office Word” – “MS Word”.

3. Enter the desired text. For practice, you can type a sentence or even a couple of words. Check your keyboard layout - select the Cyrillic layout. Hold down the Ctrl key + the "E" key + the "E" key (Ctrl + double-click the "E" key). The hidden symbol “’” will appear in front of the cursor.

4. It is also possible to install apostrophe without switching the keyboard layout using another method, one that can only be suitable for keyboards with a separate digital component (under the Num Lock key). Hold down the Alt key and type “039” on the numeric keypad. The hidden symbol “’” will appear in front of the cursor. It is worth noting that when typing the number “039” in the top row of the keyboard (under the function keys F1-F12), it is impossible to obtain such a result. Therefore, this method is not suitable for most laptop keyboards.

An apostrophe is a superscript comma, which is used in writing both in Russian (mainly for writing foreign proper names) and in most foreign languages Latin group. To enter this character, a special key on a standard keyboard is used, as well as a character table of the Windows operating system or Microsoft Office package.

Instructions

1. The easiest way to enter a superscript comma is to press the key with the quotation marks at the top and the apostrophe at the bottom, which is located just to the left of the Enter key. In the Cyrillic keyboard layout, pressing this key will display the letter “E”. But what to do if this particular key turns out to be broken, and entering the apostrophe sign with keyboard support does not seem acceptable?

2. If you are working in any of the Microsoft Office programs (Word, Excel, etc.), go to the “Insert” tab and click the “Symbol” button. By default, it is located on the right side of the toolbar, the very last one. Select the "Superscript and Subscript" section to narrow your search among several hundred characters. Find the apostrophe mark and click the Insert button. A superscript comma will appear in the text.

3. That's right, you can also add an apostrophe to a text input field in any Windows application (browser, image processing program, email application, etc.). To do this, if the seventh version of Windows is installed on your computer, open the “Start” menu and enter the word “table” in the search field in order to quickly discover the “Symbol Table” system application. For users of earlier versions of Windows, you will have to search for this utility by step by step opening the following sections in the Start menu: “All Programs”, “Typical”, “Utilities”.

4. In the Symbol Table application dialog box, the superscript comma symbol can be found in the first line of the list of elements - this will be the seventh icon in a row. Another option is to enter the word Apostrophe in the Search field in the same dialog box. The program will mechanically give you the required symbol.

Pay attention!
In the place where you need to put an apostrophe, place the cursor, press the ALT key and hold it, type 0146 on the numeric keypad, then release the ALT / All key. In World I found an apostrophe, but it is not placed on any key on the keyboard, example `’’ the one in the center is placed only here ’, but in World and Pascal it ’.

Useful advice
enter the apostrophe through its code on the numeric keypad: Alt-39 or Alt-8217 (the second option requires more pressing, but inserts the correct apostrophe, the one that is recognized by the spell checker in MS Word). in MS Word, an apostrophe can be entered by pressing Ctrl plus the tilde key twice (to the left of the one) or the letter “e” key twice (to the left of Enter) - here, too, the 1st case is preferable.

The apostrophe, or leading comma, is often used in French, English, Belarusian or Ukrainian. But there are times when it needs to be written in a Russian word. This can be done using a button on the keyboard or a specialized menu in a text editor.

An apostrophe is a non-literal character in spelling that is represented by an upper superscript comma, used in Russian in following cases:

Foreign names with a comma at the top. As a rule, it is preceded by the letters D or O.
Foreign geographical names.
Words that were written in Latin using a suffix.

How to print

In what ways can you print the top comma:

You can apply the keyboard layout to English and click on the button with the letter “E”.
With Ukrainian keyboard layout top sign placed on a separate button. It is located where the Russian letter “e” is located. By clicking on this button, you can get a comma.
You can insert a comma using ascll codes: press the “Alt” key and simultaneously type “039”.
You can enter the character on the numeric keypad. If you use numbers above letters on a laptop, it won't work. This manipulation is difficult for laptop users. But if you press the NumLock key, the numeric block will switch to an alphabetic one and you can safely carry out the required manipulation.
The desired symbol can be entered in the text editor Microsoft Word. This article will provide an example in the 2007 editor's work. You must click on the “Symbol” sub-item in the “Insert” menu. In the pop-up window, you need to click on the “other symbols” entry. Then you need to go to the “font” tab, put “plain text” there and select the one you need from among the characters presented. You need to double-click on the desired symbol, then press the “insert” key. After this, the window must be closed. Thus, the desired icon will appear in the document.
The function of inserting this character is available in the free Open Office Writer editor. To insert the required character, you need to go to the “insert” menu and select the “special character” sub-item. In the expanded window, the choice of symbol must be noted in the “set” field. You will need to select the desired icon and double-click on it. Alternatively, you can select it and press OK.
To insert into Windows, you need to use the symbol program that is built into operating system. To do this, you need to go to the “start” menu and select “all programs” there, then you need to select the “standard” sub-item, then select the “utility” item. The “symbol table” will open. In it you need to select the appropriate font and double-click on the apostrophe sign or select it. Then you need to press the “select” key. It will appear in the copy field. Then you need to select the required character, copy it to the clipboard, and paste it into the required place in a text editor. This can be done by successively pressing the key combination “Ctrl+C” or “Ctrl+V”.
To make your work easier, there is a very simple method for putting a sign in a text editor. To do this, you need to type the top comma only once, and then simply copy it and paste it into the required place.

How to put a character on a Latin keyboard that does not provide Cyrillic

In this case, you need to add two languages: Russian and Ukrainian. In this case, the apostrophe can be placed in three ways:

In the Ukrainian layout, the apostrophe must be found in the upper left button, in the Latin layout it is the “~” icon. And in the Ukrainian layout it turns out to be an upper comma.
In the English layout, you need to find a key that corresponds to the letter “E” on the Russian layout.
The Russian keyboard layout does not need to be switched; the required character can be typed using the key combination “Alt+39” on the numeric keypad.

Some advise pressing the NumLock button, but the required character is obtained both with and without this button.

Unconventional input method

This input method is not so popular; only advanced users use it. But there is no difficulty in this method, you just need to remember the hotkey combination “Alt+0146”. Please note that in this case you need to use the numbers from the right numeric block. The upper number rows are not suitable for this. The advantage of this method is that you do not need to unfold another keyboard. The disadvantage of this method is the complex combination of shortcut keys.

You can use the character table built into Windows to write characters. This table can be opened in several ways. For example, you can press the "Start" key, then press the "Windows+R" key, then launch the "Run" interpreter and press the "charmap" key. When the table appears, you need to select the apostrophe sign. To do this, click the “select” button and then click on “copy”. So the symbol top comma will be copied to the clipboard. Now all that remains is to put it in the right place. This method has a disadvantage - it is a low input speed and the mandatory presence of a mouse.

You need to decide for yourself which method of entering the desired character is best to use. The article presented many ways to set the necessary punctuation mark. The user must decide which method to use.