Find the derivative of a function with a detailed solution. How to find the derivative? Examples of solutions

On which we analyzed the simplest derivatives, and also got acquainted with the rules of differentiation and some technical methods finding derivatives. Thus, if you are not very good with derivatives of functions or some points in this article are not entirely clear, then first read the above lesson. Please get in a serious mood - the material is not simple, but I will still try to present it simply and clearly.

In practice, you have to deal with the derivative of a complex function very often, I would even say, almost always, when you are given tasks to find derivatives.

We look at the table at the rule (No. 5) for differentiating a complex function:

Let's figure it out. First of all, let's pay attention to the entry. Here we have two functions – and , and the function, figuratively speaking, is nested within the function . A function of this type (when one function is nested within another) is called a complex function.

I will call the function external function, and the function – internal (or nested) function.

! These definitions are not theoretical and should not appear in the final design of assignments. I use informal expressions “external function”, “internal” function only to make it easier for you to understand the material.

To clarify the situation, consider:

Example 1

Find the derivative of a function

Under the sine we have not just the letter “X”, but an entire expression, so finding the derivative right away from the table will not work. We also notice that it is impossible to apply the first four rules here, there seems to be a difference, but the fact is that the sine cannot be “torn into pieces”:

IN in this example It’s already intuitively clear from my explanations that a function is complex function, and the polynomial is an internal function (embedding), and is an external function.

First step what you need to do when finding the derivative of a complex function is to understand which function is internal and which is external.

In case simple examples It seems clear that a polynomial is embedded under the sine. But what if everything is not obvious? How to accurately determine which function is external and which is internal? To do this, I suggest using the following technique, which can be done mentally or in a draft.

Let's imagine that we need to use a calculator to calculate the value of the expression at (instead of one there can be any number).

What will we calculate first? First of all you will need to perform the following action: , therefore the polynomial will be an internal function:

Secondly will need to be found, so sine – will be an external function:

After we SOLD OUT with internal and external functions, it’s time to apply the rule of differentiation of complex functions .

Let's start deciding. From the lesson How to find the derivative? we remember that the design of a solution to any derivative always begins like this - we enclose the expression in brackets and put a stroke at the top right:

At first we find the derivative of the external function (sine), look at the table of derivatives of elementary functions and notice that . All table formulas are also applicable if “x” is replaced with a complex expression, in this case:

Please note that the inner function hasn't changed, we don't touch it.

Well, it's quite obvious that

The result of applying the formula in its final form it looks like this:

The constant factor is usually placed at the beginning of the expression:

If there is any misunderstanding, write the solution down on paper and read the explanations again.

Example 2

Find the derivative of a function

Example 3

Find the derivative of a function

As always, we write down:

Let's figure out where we have an external function and where we have an internal one. To do this, we try (mentally or in a draft) to calculate the value of the expression at . What should you do first? First of all, you need to calculate what the base is equal to: therefore, the polynomial is the internal function:

And, only then is the exponentiation performed, therefore, the power function is an external function:

According to the formula , first you need to find the derivative of the external function, in this case, the degree. We look for the required formula in the table: . We repeat again: any tabular formula is valid not only for “X”, but also for a complex expression. Thus, the result of applying the rule for differentiating a complex function next:

I emphasize again that when we take the derivative of the external function, our internal function does not change:

Now all that remains is to find a very simple derivative of the internal function and tweak the result a little:

Example 4

Find the derivative of a function

This is an example for you to solve on your own (answer at the end of the lesson).

To consolidate your understanding of the derivative of a complex function, I will give an example without comments, try to figure it out on your own, reason where the external and where the internal function is, why the tasks are solved this way?

Example 5

a) Find the derivative of the function

b) Find the derivative of the function

Example 6

Find the derivative of a function

Here we have a root, and in order to differentiate the root, it must be represented as a power. Thus, first we bring the function into the form appropriate for differentiation:

Analyzing the function, we come to the conclusion that the sum of the three terms is an internal function, and raising to a power is an external function. We apply the rule of differentiation of complex functions :

We again represent the degree as a radical (root), and for the derivative of the internal function we apply a simple rule for differentiating the sum:

Ready. You can also reduce the expression to a common denominator in brackets and write everything down as one fraction. It’s beautiful, of course, but when you get cumbersome long derivatives, it’s better not to do this (it’s easy to get confused, make an unnecessary mistake, and it will be inconvenient for the teacher to check).

Example 7

Find the derivative of a function

This is an example for you to solve on your own (answer at the end of the lesson).

It is interesting to note that sometimes instead of the rule for differentiating a complex function, you can use the rule for differentiating a quotient , but such a solution will look like an unusual perversion. Here is a typical example:

Example 8

Find the derivative of a function

Here you can use the rule of differentiation of the quotient , but it is much more profitable to find the derivative through the rule of differentiation of a complex function:

We prepare the function for differentiation - we move the minus out of the derivative sign, and raise the cosine into the numerator:

Cosine is an internal function, exponentiation is an external function.
Let's use our rule :

We find the derivative of the internal function and reset the cosine back down:

Ready. In the example considered, it is important not to get confused in the signs. By the way, try to solve it using the rule , the answers must match.

Example 9

Find the derivative of a function

This is an example for you to solve on your own (answer at the end of the lesson).

So far we have looked at cases where we had only one nesting in a complex function. In practical tasks, you can often find derivatives, where, like nesting dolls, one inside the other, 3 or even 4-5 functions are nested at once.

Example 10

Find the derivative of a function

Let's understand the attachments of this function. Let's try to calculate the expression using the experimental value. How would we count on a calculator?

First you need to find , which means the arcsine is the deepest embedding:

This arcsine of one should then be squared:

And finally, we raise seven to a power:

That is, in this example we have three different functions and two embeddings, while the innermost function is the arcsine, and the outermost function is the exponential function.

Let's start deciding

According to the rule First you need to take the derivative of the outer function. We look at the table of derivatives and find the derivative exponential function: The only difference is that instead of “x” we have a complex expression, which does not negate the validity of this formula. So, the result of applying the rule for differentiating a complex function next.

On this lesson we will learn to find derivative of a complex function. The lesson is a logical continuation of the lesson How to find the derivative?, in which we examined the simplest derivatives, and also became acquainted with the rules of differentiation and some technical techniques for finding derivatives. Thus, if you are not very good with derivatives of functions or some points in this article are not entirely clear, then first read the above lesson. Please get in a serious mood - the material is not simple, but I will still try to present it simply and clearly.

In practice, you have to deal with the derivative of a complex function very often, I would even say, almost always, when you are given tasks to find derivatives.

We look at the table at the rule (No. 5) for differentiating a complex function:

I will call the function external function, and the function – internal (or nested) function.

To clarify the situation, consider:

Example 1

Find the derivative of a function

In this example, it is already intuitively clear from my explanations that a function is a complex function, and the polynomial is an internal function (embedding), and an external function.

First step what you need to do when finding the derivative of a complex function is to understand which function is internal and which is external.

In the case of simple examples, it seems clear that a polynomial is embedded under the sine. But what if everything is not obvious? How to accurately determine which function is external and which is internal? To do this, I suggest using the following technique, which can be done mentally or in a draft.

Let's imagine that we need to use a calculator to calculate the value of the expression at (instead of one there can be any number).

What will we calculate first? First of all you will need to perform the following action: , therefore the polynomial will be an internal function:

Secondly will need to be found, so sine – will be an external function:

After we SOLD OUT With internal and external functions, it's time to apply the rule of differentiation of complex functions.

Let's start deciding. From class How to find the derivative? we remember that the design of a solution to any derivative always begins like this - we enclose the expression in brackets and put a stroke at the top right:

Please note that the inner function hasn't changed, we don't touch it.

Well, it's quite obvious that

The final result of applying the formula looks like this:

The constant factor is usually placed at the beginning of the expression:

If there is any misunderstanding, write the solution down on paper and read the explanations again.

Example 2

Find the derivative of a function

Example 3

Find the derivative of a function

As always, we write down:

Let's figure out where we have an external function and where we have an internal one. To do this, we try (mentally or in a draft) to calculate the value of the expression at . What should you do first? First of all, you need to calculate what the base is equal to: therefore, the polynomial is the internal function:

And, only then is the exponentiation performed, therefore, the power function is an external function:

According to the formula, you first need to find the derivative of the external function, in this case, the degree. We look for the required formula in the table: . We repeat again: any tabular formula is valid not only for “X”, but also for a complex expression. Thus, the result of applying the rule for differentiating a complex function is as follows:

Example 4

Find the derivative of a function

This is an example for you to solve on your own (answer at the end of the lesson).

Example 5

a) Find the derivative of the function

b) Find the derivative of the function

Example 6

Find the derivative of a function

Here we have a root, and in order to differentiate the root, it must be represented as a power. Thus, first we bring the function into the form appropriate for differentiation:

We again represent the degree as a radical (root), and for the derivative of the internal function we apply a simple rule for differentiating the sum:

Example 7

Find the derivative of a function

This is an example for you to solve on your own (answer at the end of the lesson).

Example 8

Find the derivative of a function

Here you can use the rule of differentiation of the quotient , but it is much more profitable to find the derivative through the rule of differentiation of a complex function:

We prepare the function for differentiation - we move the minus out of the derivative sign, and raise the cosine into the numerator:

Cosine is an internal function, exponentiation is an external function.
Let's use our rule:

We find the derivative of the internal function and reset the cosine back down:

Ready. In the example considered, it is important not to get confused in the signs. By the way, try to solve it using the rule , the answers must match.

Example 9

Find the derivative of a function

This is an example for you to solve on your own (answer at the end of the lesson).

Example 10

Find the derivative of a function

Let's understand the attachments of this function. Let's try to calculate the expression using the experimental value. How would we count on a calculator?

First you need to find , which means the arcsine is the deepest embedding:

This arcsine of one should then be squared:

And finally, we raise seven to a power:

That is, in this example we have three different functions and two embeddings, while the innermost function is the arcsine, and the outermost function is the exponential function.

Let's start deciding

According to the rule, you first need to take the derivative of the external function. We look at the table of derivatives and find the derivative of the exponential function: The only difference is that instead of “x” we have a complex expression, which does not negate the validity of this formula. So, the result of applying the rule for differentiating a complex function is as follows.

Definition. Let the function $y = f(x)$ be defined in a certain interval containing the point $x_0$ inside it. Let's give the argument an increment $\Delta x $ such that it does not leave this interval. Let's find the corresponding increment of the function $\Delta y $ (when moving from the point $x_0 $ to the point $x_0 + \Delta x $) and compose the relation $\frac(\Delta y)(\Delta x) $. If there is a limit to this ratio at $\Delta x \rightarrow 0$, then the specified limit is called derivative of a function$y=f(x) $ at the point $x_0 $ and denote $f"(x_0) $.

$$ \lim_(\Delta x \to 0) \frac(\Delta y)(\Delta x) = f"(x_0) $$

The symbol y is often used to denote the derivative. Note that y" = f(x) is a new function, but naturally related to the function y = f(x), defined at all points x at which the above limit exists . This function is called like this: derivative of the function y = f(x).

Geometric meaning of derivative is as follows. If it is possible to draw a tangent to the graph of the function y = f(x) at the point with abscissa x=a, which is not parallel to the y-axis, then f(a) expresses the slope of the tangent:
$k = f"(a)$

Since $k = tg(a) $, then the equality $f"(a) = tan(a) $ is true.

Now let’s interpret the definition of derivative from the point of view of approximate equalities. Let the function $y = f(x)$ have a derivative at a specific point $x$:
$$ \lim_(\Delta x \to 0) \frac(\Delta y)(\Delta x) = f"(x) $$
This means that near the point x the approximate equality $\frac(\Delta y)(\Delta x) \approx f"(x) $, i.e. $\Delta y \approx f"(x) \cdot\Delta x$. The meaningful meaning of the resulting approximate equality is as follows: the increment of the function is “almost proportional” to the increment of the argument, and the coefficient of proportionality is the value of the derivative in given point X. For example, for the function $y = x^2$ the approximate equality $\Delta y \approx 2x \cdot \Delta x $ is valid. If we carefully analyze the definition of a derivative, we will find that it contains an algorithm for finding it.

Let's formulate it.

How to find the derivative of the function y = f(x)?

1. Fix the value of $x$, find $f(x)$
2. Give the argument $x$ an increment $\Delta x$, go to new point$x+ \Delta x $, find $f(x+ \Delta x) $
3. Find the increment of the function: $\Delta y = f(x + \Delta x) - f(x) $
4. Create the relation $\frac(\Delta y)(\Delta x) $
5. Calculate $$ \lim_(\Delta x \to 0) \frac(\Delta y)(\Delta x) $$
This limit is the derivative of the function at point x.

If a function y = f(x) has a derivative at a point x, then it is called differentiable at a point x. The procedure for finding the derivative of the function y = f(x) is called differentiation functions y = f(x).

Let us discuss the following question: how are continuity and differentiability of a function at a point related to each other?

Let the function y = f(x) be differentiable at the point x. Then a tangent can be drawn to the graph of the function at point M(x; f(x)), and, recall, the angular coefficient of the tangent is equal to f "(x). Such a graph cannot “break” at point M, i.e. the function must be continuous at point x.

These were “hands-on” arguments. Let us give a more rigorous reasoning. If the function y = f(x) is differentiable at the point x, then the approximate equality $\Delta y \approx f"(x) \cdot \Delta x$ holds. If in this equality $\Delta x $ tends to zero, then $\Delta y$ will tend to zero, and this is the condition for the continuity of the function at a point.

So, if a function is differentiable at a point x, then it is continuous at that point.

The reverse statement is not true. For example: function y = |x| is continuous everywhere, in particular at the point x = 0, but the tangent to the graph of the function at the “junction point” (0; 0) does not exist. If at some point a tangent cannot be drawn to the graph of a function, then the derivative does not exist at that point.

Another example. The function $y=\sqrt(x)$ is continuous on the entire number line, including at the point x = 0. And the tangent to the graph of the function exists at any point, including at the point x = 0. But at this point the tangent coincides with the y-axis, i.e., it is perpendicular to the abscissa axis, its equation has the form x = 0. Slope coefficient such a line does not have, which means that $f"(0) $ does not exist either

So, we got acquainted with a new property of a function - differentiability. How can one conclude from the graph of a function that it is differentiable?

The answer is actually given above. If at some point it is possible to draw a tangent to the graph of a function that is not perpendicular to the abscissa axis, then at this point the function is differentiable. If at some point the tangent to the graph of a function does not exist or it is perpendicular to the abscissa axis, then at this point the function is not differentiable.

Rules of differentiation

The operation of finding the derivative is called differentiation. When performing this operation, you often have to work with quotients, sums, products of functions, as well as “functions of functions,” that is, complex functions. Based on the definition of derivative, we can derive differentiation rules that make this work easier. If C - constant number and f=f(x), g=g(x) are some differentiable functions, then the following are true differentiation rules:

$$ C"=0 $$ $$ x"=1 $$ $$ (f+g)"=f"+g" $$ $$ (fg)"=f"g + fg" $$ $$ ( Cf)"=Cf" $$ $$ \left(\frac(f)(g) \right) " = \frac(f"g-fg")(g^2) $$ $$ \left(\frac (C)(g) \right) " = -\frac(Cg")(g^2) $$ Derivative of a complex function:
$$ f"_x(g(x)) = f"_g \cdot g"_x $$

Table of derivatives of some functions

$$ \left(\frac(1)(x) \right) " = -\frac(1)(x^2) $$ $$ (\sqrt(x)) " = \frac(1)(2\ sqrt(x)) $$ $$ \left(x^a \right) " = a x^(a-1) $$ $$ \left(a^x \right) " = a^x \cdot \ln a $$ $$ \left(e^x \right) " = e^x $$ $$ (\ln x)" = \frac(1)(x) $$ $$ (\log_a x)" = \frac (1)(x\ln a) $$ $$ (\sin x)" = \cos x $$ $$ (\cos x)" = -\sin x $$ $$ (\text(tg) x) " = \frac(1)(\cos^2 x) $$ $$ (\text(ctg) x)" = -\frac(1)(\sin^2 x) $$ $$ (\arcsin x) " = \frac(1)(\sqrt(1-x^2)) $$ $$ (\arccos x)" = \frac(-1)(\sqrt(1-x^2)) $$ $$ (\text(arctg) x)" = \frac(1)(1+x^2) $$ $$ (\text(arcctg) x)" = \frac(-1)(1+x^2) $ $

The problem of finding the derivative of given function is one of the main courses in mathematics high school and in higher educational institutions. It is impossible to fully explore a function and construct its graph without taking its derivative. The derivative of a function can be easily found if you know the basic rules of differentiation, as well as the table of derivatives of basic functions. Let's figure out how to find the derivative of a function.

The derivative of a function is the limit of the ratio of the increment of the function to the increment of the argument when the increment of the argument tends to zero.

Understanding this definition is quite difficult, since the concept of a limit is not fully studied in school. But in order to find derivatives of various functions, it is not necessary to understand the definition; let’s leave it to mathematicians and move straight to finding the derivative.

The process of finding the derivative is called differentiation. When differentiating the function we will get new feature.

To denote them we will use latin letters f, g, etc.

There are many different notations for derivatives. We will use a stroke. For example, writing g" means that we will find the derivative of the function g.

Derivatives table

In order to answer the question of how to find the derivative, it is necessary to provide a table of derivatives of the main functions. To calculate the derivatives of elementary functions, it is not necessary to perform complex calculations. It is enough just to look at its value in the table of derivatives.

(sin x)"=cos x
(cos x)"= –sin x
(x n)"=n x n-1
(e x)"=e x
(ln x)"=1/x
(a x)"=a x ln a
(log a x)"=1/x ln a
(tg x)"=1/cos 2 x
(ctg x)"= – 1/sin 2 x
(arcsin x)"= 1/√(1-x 2)
(arccos x)"= - 1/√(1-x 2)
(arctg x)"= 1/(1+x 2)
(arcctg x)"= - 1/(1+x 2)

Example 1. Find the derivative of the function y=500.

We see that this is a constant. From the table of derivatives it is known that the derivative of a constant is equal to zero (formula 1).

Example 2. Find the derivative of the function y=x 100.

This is a power function whose exponent is 100, and to find its derivative you need to multiply the function by the exponent and reduce it by 1 (formula 3).

(x 100)"=100 x 99

Example 3. Find the derivative of the function y=5 x

This is an exponential function, let's calculate its derivative using formula 4.

Example 4. Find the derivative of the function y= log 4 x

We find the derivative of the logarithm using formula 7.

(log 4 x)"=1/x ln 4

Rules of differentiation

Let's now figure out how to find the derivative of a function if it is not in the table. Most of the functions studied are not elementary, but are combinations of elementary functions using simple operations (addition, subtraction, multiplication, division, and multiplication by a number). To find their derivatives, you need to know the rules of differentiation. Below, the letters f and g denote functions, and C is a constant.

1. The constant coefficient can be taken out of the sign of the derivative

Example 5. Find the derivative of the function y= 6*x 8

We take it out constant coefficient 6 and differentiate only x 4 . This is a power function, the derivative of which is found using formula 3 of the table of derivatives.

(6*x 8)" = 6*(x 8)"=6*8*x 7 =48* x 7

2. The derivative of a sum is equal to the sum of the derivatives

(f + g)"=f" + g"

Example 6. Find the derivative of the function y= x 100 +sin x

A function is the sum of two functions, the derivatives of which we can find from the table. Since (x 100)"=100 x 99 and (sin x)"=cos x. The derivative of the sum will be equal to the sum of these derivatives:

(x 100 +sin x)"= 100 x 99 +cos x

3. The derivative of the difference is equal to the difference of the derivatives

(f – g)"=f" – g"

Example 7. Find the derivative of the function y= x 100 – cos x

This function is the difference of two functions, the derivatives of which we can also find in the table. Then the derivative of the difference is equal to the difference of the derivatives and don’t forget to change the sign, since (cos x)"= – sin x.

(x 100 – cos x)"= 100 x 99 + sin x

Example 8. Find the derivative of the function y=e x +tg x– x 2.

This function has both a sum and a difference; let’s find the derivatives of each term:

(e x)"=e x, (tg x)"=1/cos 2 x, (x 2)"=2 x. Then the derivative of the original function is equal to:

(e x +tg x– x 2)"= e x +1/cos 2 x –2 x

4. Derivative of the product

(f * g)"=f" * g + f * g"

Example 9. Find the derivative of the function y= cos x *e x

To do this, we first find the derivative of each factor (cos x)"=–sin x and (e x)"=e x. Now let's substitute everything into the product formula. We multiply the derivative of the first function by the second and add the product of the first function by the derivative of the second.

(cos x* e x)"= e x cos x – e x *sin x

5. Derivative of the quotient

(f / g)"= f" * g – f * g"/ g 2

Example 10. Find the derivative of the function y= x 50 /sin x

To find the derivative of a quotient, we first find the derivative of the numerator and denominator separately: (x 50)"=50 x 49 and (sin x)"= cos x. Substituting the derivative of the quotient into the formula, we get:

(x 50 /sin x)"= 50x 49 *sin x – x 50 *cos x/sin 2 x

Derivative of a complex function

A complex function is a function represented by a composition of several functions. There is also a rule for finding the derivative of a complex function:

(u (v))"=u"(v)*v"

Let's figure out how to find the derivative of such a function. Let y= u(v(x)) be a complex function. Let's call the function u external, and v - internal.

For example:

y=sin (x 3) is a complex function.

Then y=sin(t) is an external function

t=x 3 - internal.

Let's try to calculate the derivative of this function. According to the formula, you need to multiply the derivatives of the internal and external functions.

(sin t)"=cos (t) - derivative of the external function (where t=x 3)

(x 3)"=3x 2 - derivative of the internal function

Then (sin (x 3))"= cos (x 3)* 3x 2 is the derivative of a complex function.

Entry level

Derivative of a function. Comprehensive Guide (2019)

Let's imagine a straight road passing through a hilly area. That is, it goes up and down, but does not turn right or left. If the axis is directed horizontally along the road and vertically, then the road line will be very similar to the graph of some continuous function:

The axis is a certain level of zero altitude; in life we use sea level as it.

As we move forward along such a road, we also move up or down. We can also say: when the argument changes (movement along the abscissa axis), the value of the function changes (movement along the ordinate axis). Now let's think about how to determine the “steepness” of our road? What kind of value could this be? It’s very simple: how much the height will change when moving forward a certain distance. Indeed, on different sections of the road, moving forward (along the x-axis) by one kilometer, we will rise or fall by different quantities meters relative to sea level (along the ordinate axis).

Let’s denote progress (read “delta x”).

The Greek letter (delta) is commonly used in mathematics as a prefix meaning "change". That is - this is a change in quantity, - a change; then what is it? That's right, a change in magnitude.

Important: an expression is a single whole, one variable. Never separate the “delta” from the “x” or any other letter! That is, for example, .

So, we have moved forward, horizontally, by. If we compare the line of the road with the graph of the function, then how do we denote the rise? Certainly, . That is, as we move forward, we rise higher.

The value is easy to calculate: if at the beginning we were at a height, and after moving we found ourselves at a height, then. If the end point is lower than the starting point, it will be negative - this means that we are not ascending, but descending.

Let's return to "steepness": this is a value that shows how much (steeply) the height increases when moving forward one unit of distance:

Let us assume that on some section of the road, when moving forward by a kilometer, the road rises up by a kilometer. Then the slope at this place is equal. And if the road, while moving forward by m, dropped by km? Then the slope is equal.

Now let's look at the top of a hill. If you take the beginning of the section half a kilometer before the summit, and the end half a kilometer after it, you can see that the height is almost the same.

That is, according to our logic, it turns out that the slope here is almost equal to zero, which is clearly not true. Just over a distance of kilometers a lot can change. It is necessary to consider smaller areas for a more adequate and accurate assessment of steepness. For example, if you measure the change in height as you move one meter, the result will be much more accurate. But even this accuracy may not be enough for us - after all, if there is a pole in the middle of the road, we can simply pass it. What distance should we choose then? Centimeter? Millimeter? Less is more!

IN real life Measuring distances to the nearest millimeter is more than enough. But mathematicians always strive for perfection. Therefore, the concept was invented infinitesimal, that is, the absolute value is less than any number that we can name. For example, you say: one trillionth! How much less? And you divide this number by - and it will be even less. And so on. If we want to write that a quantity is infinitesimal, we write like this: (we read “x tends to zero”). It is very important to understand that this number is not zero! But very close to it. This means that you can divide by it.

The concept opposite to infinitesimal is infinitely large (). You've probably already come across it when you were working on inequalities: this number is modulo greater than any number you can think of. If you come up with the biggest number possible, just multiply it by two and you'll get an even bigger number. And infinity is even greater than what happens. In fact, the infinitely large and the infinitely small are the inverse of each other, that is, at, and vice versa: at.

Now let's get back to our road. The ideally calculated slope is the slope calculated for an infinitesimal segment of the path, that is:

I note that with an infinitesimal displacement, the change in height will also be infinitesimal. But let me remind you that infinitesimal does not mean equal to zero. If you divide infinitesimal numbers by each other, you can get a completely ordinary number, for example, . That is, one small value can be exactly times larger than another.

What is all this for? The road, the steepness... We’re not going on a car rally, but we’re teaching mathematics. And in mathematics everything is exactly the same, only called differently.

Concept of derivative

The derivative of a function is the ratio of the increment of the function to the increment of the argument for an infinitesimal increment of the argument.

Incrementally in mathematics they call change. The extent to which the argument () changes as it moves along the axis is called argument increment and is designated. How much the function (height) has changed when moving forward along the axis by a distance is called function increment and is designated.

So, the derivative of a function is the ratio to when. We denote the derivative with the same letter as the function, only with a prime on the top right: or simply. So, let's write the derivative formula using these notations:

As in the analogy with the road, here when the function increases, the derivative is positive, and when it decreases, it is negative.

Can the derivative be equal to zero? Certainly. For example, if we are driving on a flat horizontal road, the steepness is zero. And it’s true, the height doesn’t change at all. So it is with the derivative: the derivative of a constant function (constant) is equal to zero:

since the increment of such a function is equal to zero for any.

Let's remember the hilltop example. It turned out that it was possible to arrange the ends of the segment along different sides from the top, so that the height at the ends is the same, that is, the segment is parallel to the axis:

But large segments are a sign of inaccurate measurement. We will raise our segment up parallel to itself, then its length will decrease.

Eventually, when we are infinitely close to the top, the length of the segment will become infinitesimal. But at the same time, it remained parallel to the axis, that is, the height difference at its ends is equal to zero (it does not tend to, but is equal to). So the derivative

This can be understood this way: when we stand at the very top, a small shift to the left or right changes our height negligibly.

There is also a purely algebraic explanation: to the left of the vertex the function increases, and to the right it decreases. As we found out earlier, when a function increases, the derivative is positive, and when it decreases, it is negative. But it changes smoothly, without jumps (since the road does not change its slope sharply anywhere). Therefore, between negative and positive values there must definitely be. It will be where the function neither increases nor decreases - at the vertex point.

The same is true for the trough (the area where the function on the left decreases and on the right increases):

A little more about increments.

So we change the argument to magnitude. We change from what value? What has it (the argument) become now? We can choose any point, and now we will dance from it.

Consider a point with a coordinate. The value of the function in it is equal. Then we do the same increment: we increase the coordinate by. What is the argument now? Very easy: . What is the value of the function now? Where the argument goes, so does the function: . What about function increment? Nothing new: this is still the amount by which the function has changed:

Practice finding increments:

Find the increment of the function at a point when the increment of the argument is equal to.
The same goes for the function at a point.

Solutions:

At different points with the same argument increment, the function increment will be different. This means that the derivative at each point is different (we discussed this at the very beginning - the steepness of the road is different at different points). Therefore, when we write a derivative, we must indicate at what point:

Power function.

A power function is a function where the argument is to some degree (logical, right?).

Moreover - to any extent: .

The simplest case is when the exponent is:

Let's find its derivative at a point. Let's recall the definition of a derivative:

So the argument changes from to. What is the increment of the function?

Increment is this. But a function at any point is equal to its argument. That's why:

The derivative is equal to:

The derivative of is equal to:

b) Now consider quadratic function (): .

Now let's remember that. This means that the value of the increment can be neglected, since it is infinitesimal, and therefore insignificant against the background of the other term:

So, we came up with another rule:

c) We continue the logical series: .

This expression can be simplified in different ways: open the first bracket using the formula for abbreviated multiplication of the cube of the sum, or factorize the entire expression using the difference of cubes formula. Try to do it yourself using any of the suggested methods.

So, I got the following:

And again let's remember that. This means that we can neglect all terms containing:

We get: .

d) Similar rules can be obtained for large powers:

e) It turns out that this rule can be generalized for a power function with an arbitrary exponent, not even an integer:

(2)

The rule can be formulated in the words: “the degree is brought forward as a coefficient, and then reduced by .”

We will prove this rule later (almost at the very end). Now let's look at a few examples. Find the derivative of the functions:

(in two ways: by formula and using the definition of derivative - by calculating the increment of the function);

. Believe it or not, this is a power function. If you have questions like “How is this? Where is the degree?”, remember the topic “”!
Yes, yes, the root is also a degree, only fractional: .
So ours square root- this is just a degree with an indicator:
.
We look for the derivative using the recently learned formula:
If at this point it becomes unclear again, repeat the topic “”!!! (about a degree with a negative exponent)
. Now the exponent:
And now through the definition (have you forgotten yet?):
;
.
Now, as usual, we neglect the term containing:
.
. Combination of previous cases: .

Trigonometric functions.

Here we will use one fact from higher mathematics:

With expression.

You will learn the proof in the first year of institute (and to get there, you need to pass the Unified State Exam well). Now I’ll just show it graphically:

We see that when the function does not exist - the point on the graph is cut out. But the closer to the value, the closer the function is to. This is what “aims.”

Additionally, you can check this rule using a calculator. Yes, yes, don’t be shy, take a calculator, we’re not at the Unified State Exam yet.

So, let's try: ;

Don't forget to switch your calculator to Radians mode!

etc. We see that the smaller, the closer the value of the ratio to.

a) Consider the function. As usual, let's find its increment:

Let's turn the difference of sines into a product. To do this, we use the formula (remember the topic “”): .

Now the derivative:

Let's make a replacement: . Then for infinitesimal it is also infinitesimal: . The expression for takes the form:

And now we remember that with the expression. And also, what if an infinitesimal quantity can be neglected in the sum (that is, at).

So, we get the following rule: the derivative of the sine is equal to the cosine:

These are basic (“tabular”) derivatives. Here they are in one list:

Later we will add a few more to them, but these are the most important, since they are used most often.

Practice:

Find the derivative of the function at a point;
Find the derivative of the function.

Solutions:

First, let's find the derivative in general view, and then substitute its value:
;
.
Here we have something similar to power function. Let's try to bring her to
normal view:
.
Great, now you can use the formula:
.
.
. Eeeeeee.....What is this????

Okay, you're right, we don't yet know how to find such derivatives. Here we have a combination of several types of functions. To work with them, you need to learn a few more rules:

Exponent and natural logarithm.

There is a function in mathematics whose derivative for any value is equal to the value of the function itself at the same time. It is called “exponent”, and is an exponential function

The basis of this function is a constant - it is infinite decimal, that is, an irrational number (such as). It is called the “Euler number”, which is why it is denoted by a letter.

So, the rule:

Very easy to remember.

Well, let’s not go far, let’s immediately consider the inverse function. Which function is the inverse of the exponential function? Logarithm:

In our case, the base is the number:

Such a logarithm (that is, a logarithm with a base) is called “natural”, and we use a special notation for it: we write instead.

What is it equal to? Of course.

The derivative of the natural logarithm is also very simple:

Examples:

Find the derivative of the function.
What is the derivative of the function?

Answers: Exhibitor and natural logarithm- functions are uniquely simple in terms of derivatives. Exponential and logarithmic functions with any other base will have a different derivative, which we will analyze later, after we go through the rules of differentiation.

Rules of differentiation

Rules of what? Again a new term, again?!...

Differentiation is the process of finding the derivative.

That's all. What else can you call this process in one word? Not derivative... Mathematicians call the differential the same increment of a function at. This term comes from the Latin differentia - difference. Here.

When deriving all these rules, we will use two functions, for example, and. We will also need formulas for their increments:

There are 5 rules in total.

The constant is taken out of the derivative sign.

If - some constant number (constant), then.

Obviously, this rule also works for the difference: .

Let's prove it. Let it be, or simpler.

Examples.

Find the derivatives of the functions:

at a point;
at a point;
at a point;
at the point.

Solutions:

(the derivative is the same at all points, since it is a linear function, remember?);

Derivative of the product

Everything is similar here: let’s introduce a new function and find its increment:

Derivative:

Examples:

Find the derivatives of the functions and;
Find the derivative of the function at a point.

Solutions:

Derivative of an exponential function

Now your knowledge is enough to learn how to find the derivative of any exponential function, and not just exponents (have you forgotten what that is yet?).

So, where is some number.

We already know the derivative of the function, so let's try to bring our function to a new base:

For this we will use simple rule: . Then:

Well, it worked. Now try to find the derivative, and don't forget that this function is complex.

Did it work?

Here, check yourself:

The formula turned out to be very similar to the derivative of an exponent: as it was, it remains the same, only a factor appeared, which is just a number, but not a variable.

Examples:
Find the derivatives of the functions:

Answers:

This is just a number that cannot be calculated without a calculator, that is, it cannot be written down in any more in simple form. Therefore, we leave it in this form in the answer.

Derivative of a logarithmic function

It’s similar here: you already know the derivative of the natural logarithm:

Therefore, to find an arbitrary logarithm with a different base, for example:

We need to reduce this logarithm to the base. How do you change the base of a logarithm? I hope you remember this formula:

Only now we will write instead:

The denominator is simply a constant (a constant number, without a variable). The derivative is obtained very simply:

Derivatives of exponential and logarithmic functions are almost never found in the Unified State Examination, but it will not be superfluous to know them.

Derivative of a complex function.

What is a "complex function"? No, this is not a logarithm, and not an arctangent. These functions can be difficult to understand (although if you find the logarithm difficult, read the topic “Logarithms” and you will be fine), but from a mathematical point of view, the word “complex” does not mean “difficult”.

Imagine a small conveyor belt: two people are sitting and doing some actions with some objects. For example, the first one wraps a chocolate bar in a wrapper, and the second one ties it with a ribbon. The result is a composite object: a chocolate bar wrapped and tied with a ribbon. To eat a chocolate bar, you need to do the reverse steps in reverse order.

Let's create a similar mathematical pipeline: first we will find the cosine of a number, and then square the resulting number. So, we are given a number (chocolate), I find its cosine (wrapper), and then you square what I got (tie it with a ribbon). What happened? Function. This is an example of a complex function: when, to find its value, we perform the first action directly with the variable, and then a second action with what resulted from the first.

We can easily do the same steps in reverse order: first you square it, and I then look for the cosine of the resulting number: . It’s easy to guess that the result will almost always be different. Important Feature complex functions: when the order of actions changes, the function changes.

In other words, a complex function is a function whose argument is another function: .

For the first example, .

Second example: (same thing). .

The action we do last will be called "external" function, and the action performed first - accordingly "internal" function(these are informal names, I use them only to explain the material in simple language).

Try to determine for yourself which function is external and which internal:

Answers: Separating inner and outer functions is very similar to changing variables: for example, in a function

What action will we perform first? First, let's calculate the sine, and only then cube it. This means that it is an internal function, but an external one.
And the original function is their composition: .
Internal: ; external: .
Examination: .
Internal: ; external: .
Examination: .
Internal: ; external: .
Examination: .
Internal: ; external: .
Examination: .

We change variables and get a function.

Well, now we will extract our chocolate bar and look for the derivative. The procedure is always reversed: first we look for the derivative of the outer function, then we multiply the result by the derivative of the inner function. In relation to the original example, it looks like this:

Another example:

So, let's finally formulate the official rule:

Algorithm for finding the derivative of a complex function:

It seems simple, right?

Let's check with examples:

Solutions:

1) Internal: ;

External: ;

2) Internal: ;

(Just don’t try to cut it by now! Nothing comes out from under the cosine, remember?)

3) Internal: ;

External: ;

It is immediately clear that this is a three-level complex function: after all, this is already a complex function in itself, and we also extract the root from it, that is, we perform the third action (put the chocolate in a wrapper and with a ribbon in the briefcase). But there is no reason to be afraid: we will still “unpack” this function in the same order as usual: from the end.

That is, first we differentiate the root, then the cosine, and only then the expression in brackets. And then we multiply it all.

In such cases, it is convenient to number the actions. That is, let's imagine what we know. In what order will we perform actions to calculate the value of this expression? Let's look at an example:

The later the action is performed, the more “external” the corresponding function will be. The sequence of actions is the same as before:

Here the nesting is generally 4-level. Let's determine the course of action.

1. Radical expression. .

2. Root. .

3. Sine. .

4. Square. .

5. Putting it all together:

DERIVATIVE. BRIEFLY ABOUT THE MAIN THINGS

Derivative of a function- the ratio of the increment of the function to the increment of the argument for an infinitesimal increment of the argument:

Basic derivatives:

Rules of differentiation:

The constant is taken out of the derivative sign:

Derivative of the sum:

Derivative of the product:

Derivative of the quotient:

Derivative of a complex function:

Algorithm for finding the derivative of a complex function:

We define the “internal” function and find its derivative.
We define the “external” function and find its derivative.
We multiply the results of the first and second points.

Find the derivative of a function with a detailed solution. How to find the derivative? Examples of solutions

How to find the derivative of the function y = f(x)?

Rules of differentiation

Table of derivatives of some functions

Derivatives table

Example 1. Find the derivative of the function y=500.

Example 2. Find the derivative of the function y=x 100.

Example 3. Find the derivative of the function y=5 x

Example 4. Find the derivative of the function y= log 4 x

Rules of differentiation

1. The constant coefficient can be taken out of the sign of the derivative

Example 5. Find the derivative of the function y= 6*x 8

2. The derivative of a sum is equal to the sum of the derivatives

Example 6. Find the derivative of the function y= x 100 +sin x

3. The derivative of the difference is equal to the difference of the derivatives

Example 7. Find the derivative of the function y= x 100 – cos x

Example 8. Find the derivative of the function y=e x +tg x– x 2.

4. Derivative of the product

Example 9. Find the derivative of the function y= cos x *e x

5. Derivative of the quotient

Example 10. Find the derivative of the function y= x 50 /sin x

Derivative of a complex function

Derivative of a function. Comprehensive Guide (2019)

Concept of derivative

Power function.

Trigonometric functions.

Exponent and natural logarithm.

Rules of differentiation

The constant is taken out of the derivative sign.

Derivative of the product

Derivative of an exponential function

Derivative of a logarithmic function

Derivative of a complex function.

DERIVATIVE. BRIEFLY ABOUT THE MAIN THINGS

Related articles

Read also