How to make a deserter pistol from wood. How to make a weapon from wood? Homemade weapons made of wood - drawings

Weapons in the Philippines

In the Philippines, this place is called the “city of weapons.” For more than a century, Danaoans have made their living by manufacturing weapons. These people know how to assemble pistols, revolvers and machine guns by hand. The authorities created a cooperative in order to legalize the production of weapons. But instead of making money through legal means, most collaborate with the local mafia.

Jose takes the gun in his hands and looks into the sight. He thinks for a moment, and then places the mold in a vice, which is on at the moment is nothing more than a semblance of a future pistol, a piece of metal. José Arnescar will have to spend many days at work before this form takes its form. firepower. This muscular 33-year-old worker puts all his strength into working on the bolt. “This is the hardest part,” he says breathlessly. “It will take at least a week to complete the work.” This is the most important part of the weapon, so Jose will only use a file in his work.

We are located in the world's largest gun manufacturing cooperative, located in Danao on Cebu Island in the heart of the Philippines. This organization is unique in its essence; it is here that 38 and 45 caliber weapons, pump-action shotguns and even some models of machine guns are produced. 90% of the total production volume is produced manually.

In this huge old room there are only a few machines, its roof is leaky and does not protect from rain, which is why fabric is hung on top to protect the electrical wiring. There is such noise in the dimly lit room that you feel like you are in a mountain tunnel.

About 30 workers can work and modify their weapons on 2 main machines. Using a drill, each item is engraved with “WORLD” and a serial number. There is another large machine, which is considered the most important in the work; it produces drums. “This is the most important machine,” says June, watching his colleague finish his part of the job. “Thanks to it, we can do work that would be very difficult to do by hand.” “We don’t have many tools,” the worker says with regret in his voice.

In this production, each worker independently creates a weapon from start to finish, and after the sale receives almost the full cost in hand. Mostly 38 and 45 caliber weapons are produced here, as well as pump-action shotguns. It takes a week to make a 38 caliber pistol that can be sold for 30 euros, a 45 caliber takes twice as long to produce, but its price also increases. The workers of this cooperative receive an average of 70 euros per month, which is the minimum wages in the Philippines. Nearly 100 guns come out of these workshops every month, most of them ordered by police officers and soldiers who are not issued weapons on the job and for whom this is the cheapest way to obtain them. This weapon is also in demand among store and bank security guards.

Weapon making is considered an old tradition in Danao. They say that even under the Spaniards, arquebuses were made here. But the main production was formed at the beginning of the 20th century, when the Philippines was an American colony. During the Second World War, the Americans used the skills of the Danaans to remake captured Japanese weapons for your caliber. It is from those times that it has been carried out here handmade weapons.

As a result, in 1996, the authorities organized a legal cooperative for the production of weapons. But, despite all the efforts of the authorities, the majority of workers produce weapons illegally, not subordinate to the cooperative.

Finding such illegal production is not difficult. In the city center you can find the small house of Renato Gonzalez. Its entire production consists of a simple vice and a set of tools. In his workshop you can see the mold for the KG-9, a lightweight assault rifle similar to the Israeli-made UZI. It took Renato 2 weeks to produce it, and he received 100 euros for the work. The 52-year-old worker learned his skills from his grandfather and father, who were also involved in the production of weapons. “I was 8 years old when I started helping them,” recalls Renato. - I was returning from school and learning to work with a file. I'm doing this now so my kids can go to college."

According to Nestor Sabaiton, who led the cooperative until 2007, at least 5,000 people produce weapons illegally in Danao.

Naturally, there must be a person who would supervise these illegal workers. In Danao, this man is called "Rio Shark", he is one of the most experienced weapons manufacturers. In his workshop you can see the finished AR-15 automatic rifle, which is very similar to the American M-16 rifle. This weapon, worth 500 euros, was ordered by the mayor of a large neighboring city. “This is the second time I have received an order to make something like this,” says Rio. His son adds: “We had a lot of orders just before the election. A lot of politicians wanted pistols or rifles like this.”

Local elections in the Philippines have a bad reputation. For example, in 2007 during election campaign 114 candidates and party members were killed. In addition, bank robberies are often accompanied by murders. In May 2008, there was a high-profile robbery during which the perpetrator shot and killed 10 people. There are believed to be over a million units in circulation in the Philippines firearms, while a third are unlicensed.

Despite the similar situation in the country, everything is calm in the Danao police stations. In 2007, only 2 people were detained for illegal production and 18 for illegal possession of weapons. “We know that there are several illegal gun manufacturers in the city,” says Lt. Lacson Dehino, “but when we find them, we try to encourage them to join the cooperative, and if they refuse, they will be arrested.”

The illegal arms business does not seem to disturb the tranquility of Danao, where 120,000 residents lead a normal life. So a resident of Danao says with humor: “If you hear shots on the streets of Danao, it’s okay, it’s just one of the masters testing his new weapon in action.”

You are going to play cowboys or scouts. Or maybe you want to organize a competition in accuracy. Then you absolutely need a pistol. If you don't have a toy gun, you can make your own. As a result, you will have a shooting pistol that looks like a real weapon.

How to make a gun that shoots paper

Take thick paper or cardboard and fold it in half. On one half, close to the fold, draw the contours of the weapon according to the diagram. Carefully cut out the design.

Make a groove for the cartridge. To do this, cut the top of the barrel and bend the paper inward so that in profile the barrel looks like the letter “M”.

Make a thin cut on each side of the trunk and insert a thin elastic band there. This will be your trigger.

Color the gun as you wish. The handle can be covered with fabric to give it roughness.

Pull the elastic back and secure it to the shutter. Place a ball of paper rolled into the groove. Its radius should be slightly less than the depth of the gutter. Take the gun in your hands and use your thumb to push the rubber band up. The rubber band that slips off will hit the ball and it will fly to the target.

How to make a gun at home using a balloon

Take 2 cardboard tubes. One is longer (barrel), the other is shorter (handle). At the top of the “handle”, cut a semicircle-shaped recess so that you can smoothly connect it to the barrel. By changing the depth of the front and rear cutouts, you can adjust the angle of contact of the barrel with the handle. Fasten the pieces together using glue or tape.

Cut balloon across in half. The part with the inflation hole can be removed. Pull the second half over the end of the barrel, closing the hole on the side of the handle, and secure. Please note that if you tighten the rubber too much, it will be difficult to shoot.

Give the gun a realistic look by covering it with paper, painting it with paints and pencils.

To fire, lift the pistol up with the muzzle, place the cartridge, take aim, pull back the ball membrane with your fingers and release sharply. You can use rolled paper or plastic balls as bullets.

How to make a gun from wood

Take a piece of wood 20x12 cm, 2.5 cm thick. Draw the outline of the gun on the surface of the wood. It is best to use a template or dummy for this.

Cut the blank out of wood. To do this, you can use a band saw.

Using a sander, round off the edges of the handle, barrel, and trigger guard. At this stage you need to be careful not to remove excess.

The hammer is cut with a scroll saw while the gun is held in a vise.

Recesses on the trunk are made with a cutter.

Use a rasp to give the hammer its final shape.

The notches on the trunk are cut out with a rasp or a grinding machine.

More small details pistols are cut with a chisel.

Finally, go over the gun with medium sandpaper, and then polish it with a scratch pad.

How to make a gun at home from plywood

Transfer the image of the parts onto plywood and cut them out.

Glue the right and left parts of the gun to the internal parts.

Place the trigger (D) inside. Drill a hole as shown in the figure, insert a screw into it and secure with a nut. Attach the rubber band to the barrel with nails.

The rubber band clings to the trigger, the gun is loaded. After pressing the trigger, a shot occurs. You can use pieces of plywood, buttons, or other small things as bullets.

How to make a paper gun

Fold a landscape sheet of paper along the short side into a thin strip. This will be the trunk, so roll the paper as tightly as possible. Once you have folded the sheet, fold it in half.

Take another landscape sheet and fold it in the same way as the first, but so that the workpiece is wider (handle). Fold it in half.

Unfold the blanks. Place the “barrel” on the “handle”. Visually divide the wide part into 3 parts and alternately bend the outer parts towards the center. To obtain even bends, it is convenient to use a narrow piece.

Fold the handle in half, fold the edges along the intended fold. Cut a small longitudinal hole at the base of the workpiece.

Take a landscape sheet and roll it (maybe not all the way) along the long side (trigger). You need to bend the sheet as small as possible. Then fold the piece in half and insert it into the hole you just cut.

Slide the barrel blank into the “pockets” of the handle blank. Iron all the folds again. Trim the exposed edge of the trigger.

Bend the landscape sheet lengthwise as described earlier. As a result, you should end up with a piece slightly wider than the handle. Seal the edge with tape. Make small cuts along the folds and place the workpiece on the handle, cutting off the excess. Your pistol is now comfortable to hold.

Bend the landscape sheet crosswise as described earlier. As a result, you should have a blank approximately the width of the trunk. Bend it in half. Bend the upper corners of the ends of the workpiece inward, step back a few millimeters from the fold and cut it off. Place the blank on the back of the barrel. Tuck the cut, folded edges behind the handle.

The gun is ready. Paint it, giving the weapon a menacing look. The gun shoots paper stars. Its power is enough to knock down an iron can at close range.

Video, make a gun out of paper

If you still have questions, or some point is not clear, watch the video on making a paper gun. True, it is in English, but everything is shown clearly and is understandable without knowledge of foreign languages

How to make a gun that shoots marshmallows

You can load it with paper or shady balls, chewing gum, but then the accuracy and range of the shot is reduced.

You will need: a PVC pipe - 55 cm, a pair of corners, tees and PVC plugs; cutting tool.

Cut 5 tubes 7.5 cm long from the pipe. The length of the remaining section should be 17.5 cm.

Assemble the gun according to the diagram.

All parts must fit tightly together.

Load the weapon with marshmallows and blow sharply into the top tube. The pistol shoots several meters, but if the marshmallow dries out, its accuracy decreases.

How to make a homemade pistol simulator

This gun not only looks scary. It can be used for rapid fire training. But to make it you will need wooden and metal parts shown in the diagrams, and certain skills.

The pistol model consists of a wooden blank (the dimensions of the handle are adjusted to suit the shooter’s hand), a hammer trigger mechanism, a front sight and a rear sight with a slot.

Metal weights are inserted into the handle to balance and adjust the weight of the machine. (Fig. 10). The length of the weights is 116 and 86 mm. The weights are fastened with screws with a diameter of 3 mm. The front sight and rear sight protrude above the surface by 5-7 mm.

The gun is assembled in this order.

A starting spring (Fig. 6) is attached to plane B, located on the base of the mechanism (Fig. 4); it is made of steel grades 55, 65G, 70G. Then screw the trigger to plane B in such a way (Fig. 5) that under the pressure of the spring, after pressing, it can easily return to its initial position.

Insert and secure the spring (Fig. 8) into the slot of the striker (Fig. 7); it is made of carbon wire. Screw the hammer with the spring to plane B so that it rotates freely.

Then screw the base to the body (Fig. 9) with two screws, adjust the hook between the trigger and the firing pin.

After pressing the trigger, it should catch on the firing pin and rotate it until the firing pin comes out of the hook under the action of the spring and hits the body (simulating a shot). When returning to the initial position, the trigger pushes the firing pin upward to engage it. The engagement should be more than 1.2 mm. If engagement does not occur, file off the trigger and firing pin tabs.

Secure the trigger mechanism - it is secured with 2 screws in the housing on the right.

The trigger force can be adjusted by turning screw b (Fig. 1, 2, 13).

Remember, even toy gun is a weapon. If you hit a person in the eye, you will most likely leave him crippled for life, and if you hit him in the face, you can cause serious injury. Therefore, never point the gun at animals or people. Avoid shooting at fragile, unstable objects (glass, dishes, etc...).

How to make a gun yourself?

When we think about what a toy shooting gun should be like, we immediately imagine a large design with a large number parts, complex mechanisms, additional accessories. But in fact, you can make a gun that shoots from ordinary thick cardboard or a wooden panel. Don't believe me? Then read and remember the instructions on how to do this.

How to make a gun from wood

1. Prepare a wooden panel measuring 20x12 cm and 2.5 cm thick.
2. Draw the outline of the gun on the surface, for which you can use an old plastic toy or a paper template.
3. Cut out the drawn outline with a band saw.
4. Round off the edges of the trigger guard, grip, and barrel using a sander (be careful not to remove too much!).
5. Cut the trigger with a scroll saw (be sure to hold the gun in a vice to avoid injury).
6. Make indentations in the trigger area with a cutter.
7. Give the hammer its final shape using a rasp.
8. Saw out notches on the trunk with a grinder, then continue cutting with a chisel.
9. Clean off any imperfections with sandpaper.

Now we have to construct the firing mechanism. Making your own shooting pistol is quite difficult. For everything to work out correctly, you need to use step by step instructions.

Thus, at home you can make a pistol that will also shoot. Let's try to fire a practice shot. We take the gun in right hand. With your thumb we push the sear up - it moves the piston along the barrel. This is how a rubber band is fired from a wooden pistol.

If the description is not enough for you, then you can watch the video on this page on how to make a pistol.

Let's also consider another method of making a shooting pistol.

How to make a gun out of paper

At home, it is not always possible to use the tools with which we constructed a wooden pistol. But it can also be made from cardboard.

Making a barrel

Fold the A4 cardboard sheet several times until you get a thin strip in the form of a long rectangle - this will be the trunk.

Making the handle

Fold the A4 cardboard sheet several times in the form of a thick strip - this will be the handle.

Now we unfold both blanks, place the barrel on the handle, bending the edges slightly towards the center. The handle needs to be folded in half and a longitudinal hole cut at the base.

Making the trigger

Roll a sheet of cardboard along the long side. Fold the sheet into small pieces and then in half. Insert the workpiece into the hole cut out on the handle.

How to make a shooting mechanism

Cut the trunk on both sides. Cut the elastic from the unnecessary tire and insert it into the resulting slots.

Now you can shoot paper from our gun. How? Place the crumpled paper ball in the groove, use your thumb to remove the rubber band and release it. It contracts and shoots out a paper ball.

Using a homemade cardboard gun, you can even knock down a tin can at close range. Therefore, you must use it very carefully and do not shoot towards people and animals!

How to make a gun from plywood

To complete the picture, let's look at how to make a gun at home from plywood. To do this we need to do the following:

A shot from a plywood gun is made as follows: the trigger is pressed, the rubber band clings to it and the shot occurs. You can use ordinary small buttons as bullets.

A pistol made of wood... How many childhood memories are there in this combination of words... Memories of how very young boys and girls chased each other, imagining themselves as robbers and those who caught them. The robbers "shoot" from the simplest toys from a simple piece of wood, they became the first pistols, the first toy weapons made with my own hands. This article will discuss how to make a pistol from wood.

Making weapons is not just a children's dream

If in childhood you simply took a piece of wood that was suitable in shape, now you can use special tools and make a toy that is practically no different from a real weapon. If you build the gun correctly, it will even be able to fire. made of wood can please not only boys, but also their fathers.

Let's start production

To make a “weapon” you will need: a piece of rubber drill with a drill no larger than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a gun from wood, it is worth knowing that the design of this product is divided into three elements: solid handles and barrel, pistons and rubber bands.

First of all, you will need to make the barrel and handle of the gun. They need to be cut out of wood, the thickness should be at least 2 cm. You can choose any shape.

The main thing is that you like it and be comfortable. Don’t throw away the rest of the block, you will need it later.

We continue to answer the question of how to make a gun from wood. In the finished trunk, use a drill to make a hole along the entire length. Sand the hole made thoroughly with sandpaper. To do this, you need to roll the paper into a tube and put it on a suitable stick; either a long nail or a knitting needle will do. From the remaining piece of wood you need to make a piston. It looks like a long one wooden stick, in diameter slightly less than 6 mm. There should be a slight thickening on one part of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. You need to attach an elastic band to the thickening. It or the tape must be cut from a piece bicycle camera. Instead of a wooden rod, you can simply take a long nail. His hat will serve as a sear. The nail itself must be cut to the length of the barrel, and the cut area must be sanded well with a file to completely dull it.

The finished piston is placed in the barrel of the pistol, while at the same time it is necessary to pull the rubber band onto the handle of the weapon. The sear will need to be adjusted so that when it is pulled back, the trigger is raised. You should also make sure that it can catch on the protrusion on the pistol handle. At the same time, the piston will be firmly fixed in the cocked state. The DIY gun made of wood is ready.

We fire a training salvo

You need to shoot from such a design in this way: take the pistol in your hand, thumb At the same time, the hands push the sear upward, it slides and moves the piston along the barrel. If you don’t know how to make a gun out of wood, then this article should help you achieve excellent results.

How to make a gun from wood You can find out not only out of love by shooting bullets from rubber bands at others. In fact, boys really love such truly masculine crafts as cars and soldiers. And in the process of sawing out and bringing a wooden gun to working condition, the little master, under strict guidance, will master all the main stages of execution, see and learn how to handle complex tools used in woodworking.

How to make a gun from wood master class

There are several videos online about how to how to make a gun from wood. Master class This one is quite complicated, so it will be simply impossible for a child to cope alone, and even very dangerous. Think about which main stages of the entire complex technological process you cannot safely entrust to him. Maybe it will be grinding, maybe working with a chisel, or maybe tracing the outline of the future pistol will be enough.

When working with wood, it is imperative to follow the simplest safety rules. And this applies not only to children, but also to adults. Wear thick gloves, as wooden splinters are extremely unpleasant, they are difficult to remove, and the wound can bother you for a long time. In order to prevent this when working with unsanded boards, you need reliable protection for the skin of your hands. The second mandatory point is a protective mask or goggles. If splinters getting under the skin are unpleasant, then pieces of wood getting into the eyes can lead to very serious consequences. It’s better to play it safe and buy each production participant their own pair of safety glasses. At the same time, you will look like real professionals in this semi-game process.

The production of wooden pistols as a form of children's creativity already has a considerable history in terms of the years passed. What material will be equally accessible and at the same time equally easy to process, relative to metal or plastic? The boys, who always wanted and will want to imitate adults, made pistols for themselves from plywood, from school rulers, from boards, carried their toys with them for street games during the war, and took care of them. Previously, wooden and homemade toys were more likely associated with low-income families who could not afford to buy beautiful plastic toys in the store. Today, when a huge number of plastic pistols are sold in stores, no parent can be absolutely sure of the safety of both the material (toxic or not, what additives are present in the plastic) and the reliability of the design itself (fragility of plastic, small parts). And wooden toys nowadays are environmentally friendly, and, like everything environmentally friendly, they are fashionable and highly valued. Especially those made by yourself.

Photo of how to make a gun from wood

Let us briefly examine the main stages and photo of how to make a gun from wood. In fact, if your dad is not into plumbing, then you probably won’t have the entire set of tools needed for either your home or your dacha. Therefore, further we will also analyze more simple ways production of quite worthy combat units. By the way, an excellent compromise for dads is to take their son to a small metalworking workshop, where they ask permission to make a toy with their son. At the same time, you will show your son what tools there are, and the time spent working together, as advertising teaches us, is simply priceless.

For the craft, we take a board that is not varnished and not treated with any chemicals. A thickness of 2-2.5 centimeters will be enough to create a high-quality pistol. On the Internet, find a picture of a small life-size pistol, print it and cut it out. Place it on the board and carefully trace the outline. It is best to do this with a ballpoint pen or a permanent thin marker, since in the future the lines should not be smeared or erased, which can lead to incorrect cutting. It is best to cut such a thick board with a band saw, which will help form a smooth and neat edge. Using a grinder, process the barrel and handle, giving them the required rounded shape. Clamp the semi-finished product in a vice and cut out the trigger. It will be convenient to use a scroll saw for this. All relief notches are made using a cutter, the trigger is up to perfect shape finish with a rasp. All small details, such as notches or patterns on the handle, are cut out using a chisel. The gun is almost ready, but its surface definitely requires proper treatment, because it is intended for delicate children's hands. We sand the entire surface thoroughly. First we go over it with sandpaper, smoothing out the protrusions and irregularities, and with the help of scratch paper we polish it completely.

The finished gun can be coated with varnish, which is used specifically for working with wood, and you can also use paint for working with wood; it will create a protective film on the surface of the craft, necessary for its long and faithful service to its little owner. A little secret - before applying paint to the surface of a wooden toy, you need to first treat it with a special primer. This way, the adhesion of paint and wood will be maximum and the risk of paint chipping during play, and, therefore, further damage to the wood, will be minimal.

How to make a gun from wood: ideas

A thick board allows us to make a pistol that is closest in shape to the real thing. If everything is complicated process Since the abundance of tools and steps scares you, you can still find out how to make a gun from wood. Ideas in this case, the emphasis will be on materials that are easier to handle.

Other news