How to make a gun from wood with your own hands. How to make a toy wooden gun yourself

How to make a gun yourself?

When we think about what a toy shooting gun should be like, we immediately imagine a large design with a large number parts, complex mechanisms, additional accessories. But in fact, you can make a gun that shoots from ordinary thick cardboard or a wooden panel. Don't believe me? Then read and remember the instructions on how to do this.

How to make a gun from wood

Prepare a wooden panel measuring 20x12 cm and 2.5 cm thick.
Draw the outline of the gun on the surface, for which you can use an old plastic toy or a paper template.
Cut out the drawn outline with a band saw.
Round off the edges of the trigger guard, grip, and barrel using a sander (be careful not to remove too much!).
Cut the trigger with a scroll saw (be sure to hold the gun in a vice to avoid injury).
Make indentations in the trigger area with a cutter.
Give the hammer its final shape using a rasp.
Saw out notches on the trunk with a grinder, then continue cutting with a chisel.
Clean off any imperfections with sandpaper.

Now we have to construct the firing mechanism. Making your own shooting pistol is quite difficult. For everything to work out correctly, you need to use step by step instructions.

Thus, at home you can make a pistol that will also shoot. Let's try to fire a practice shot. We take the gun in right hand. With your thumb we push the sear up - it moves the piston along the barrel. This is how a rubber band is fired from a wooden pistol.

If the description is not enough for you, then you can watch the video on this page on how to make a pistol.

Let's also consider another method of making a shooting pistol.

How to make a gun out of paper

At home, it is not always possible to use the tools with which we constructed a wooden pistol. But it can also be made from cardboard.

Making a barrel

Fold the A4 cardboard sheet several times until you get a thin strip in the form of a long rectangle - this will be the trunk.

Making the handle

Fold the A4 cardboard sheet several times in the form of a thick strip - this will be the handle.

Now we unfold both blanks, place the barrel on the handle, bending the edges slightly towards the center. The handle needs to be folded in half and a longitudinal hole cut at the base.

Making the trigger

Roll a sheet of cardboard along the long side. Fold the sheet into small pieces and then in half. Insert the workpiece into the hole cut out on the handle.

How to make a shooting mechanism

Cut the trunk on both sides. Cut the elastic from the unnecessary tire and insert it into the resulting slots.

Now you can shoot paper from our gun. How? Place the crumpled paper ball in the groove, use your thumb to remove the rubber band and release it. It contracts and shoots out a paper ball.

Using a homemade cardboard gun, you can even knock down a tin can at close range. Therefore, you must use it very carefully and do not shoot towards people and animals!

How to make a gun from plywood

To complete the picture, let's look at how to make a gun at home from plywood. To do this we need to do the following:

A shot from a plywood gun is made as follows: the trigger is pressed, the rubber band clings to it and the shot occurs. You can use ordinary small buttons as bullets.

There will always be a place in the world for resourceful people with a rich imagination and a penchant for experimentation. It is thanks to such curious experimenters that very useful things sometimes come into being, often assembled from improvised means. With your own hands you can make beautiful crafts to decorate your home, as well as various stands, shelves, vases, even from old things.

However, today we will talk about how to make a homemade pistol at home. Some people are only interested in this out of curiosity, and sometimes attackers have a similar goal. Of course, this requires prior knowledge of the general design of the pistol and its parts.

How to make a gun

Thus, pistols manufactured by industrial methods are subject to mandatory requirements. technical documentation for each individual type of weapon. Documents for weapons indicate such characteristics as ballistic properties, reliability of the weapon, and what degree of threat it poses to the owner. The weapon itself is manufactured using specialized equipment.

Assembling a pistol

So how did it become possible to make a pistol with your own hands at home? There are many proven methods for this, namely:

you can make each individual part for the gun yourself;
you can assemble a pistol from disparate parts, while some parts can be manufactured either industrially or independently;
you can remake a finished pistol, most often this is done to add existing weapons necessary properties that will change its original purpose;
you can also remake individual devices and get a very real firearms(for example, pneumatic gun, starting gun, construction gun).

How to make an ignition

Most often, a pistol is made at home from those parts and tools that are at hand based on ready-made drawings. There is no need to talk about any documentation, specialized equipment, and especially safety precautions in such conditions.

So, “ignition” is a real homemade product, which is assembled from such basic parts as a barrel, handle, fasteners, as well as many other parts. It depends on the wishes of the master himself. To make the “ignition”, we select a thick-walled steel pipe with a diameter of at least 8 and no more than 20 mm. In order for the gases to flow through the pipe in the same direction, the end of the pipe can either be flattened or welded, and sometimes it becomes necessary to tighten the end of the pipe with a bolt, cutting a thread inside the steel pipe.

The handle should be such that it is comfortable to hold in your hand when shooting. As a rule, it is most often made of wood. To do this, a cutout is made under the circular-shaped barrel on the handle itself. The barrel is attached to the handle using metal plates. In such a pistol, match sulfur is usually used as a charge, and bullets are replaced by any available items, for example, balls from a set of bearings.

Now it is clear that making a pistol is quite possible for any person interested in this topic, and does not cause any particular difficulties. It is only important to remember that by making weapons at home, a person automatically exposes himself and his loved ones to danger. Under no circumstances should a gun be given to children. And also try to follow safety precautions!

How to make a gun out of paper

There are plenty of homemade crafts in various ways assemble a pistol with your own hands from scrap materials. You can even make a gun from a clothespin or a wooden gun. To do this, look on the Internet for a video on how to make a pistol. You can also watch videos on how to make a gun from Lego, a gun from a pen, and even how to make a gun from wood. If you want to do something interesting in free time, you are invited to make a paper pistol that also shoots. So, first you need a regular sheet of paper, scissors, an eraser and any adhesive tape.
Do not under any circumstances make or take a gun with you to work or school! This can lead to extremely unpleasant consequences!

How to make a paper gun

Step 1
First of all, we make the handle. We place a sheet of paper horizontally in front of us and bend it at the bottom by 3.8 cm. Thus, wrapping the paper around the first bend, we continue to bend it until the paper folds into a tube measuring 3.8 cm. Next, to connect the two edges of the sheet, and also along the long side, you need to glue them with tape. Then fold the sheet in half. And in the center you need to make a sharp bend.

Repeat all steps from the beginning. Only now make two parts measuring 2.5 cm and 1.3 cm.

Bend the handle. To do this, bend a 4 cm piece in the center so that the bend is visible. Next, you need to measure 2.5 cm from the center on both sides of the edges, and according to these marks, bend the sheet so that its edges meet under the central fold point at the bottom.

At this stage you need to make a slot for the trigger. Cut a 1.5 cm long slit in the central bend. You only need to cut off a small amount. To make cutting easier, make the opposite fold from the center fold.

Now fold the paper along the central fold so that the corner parts are aligned with each other. This is the frame of the gun that will house the hammer and barrel.

To insert the barrel, thread a 2.5cm strip through either side of the curve of the handle. Check that both ends pass through the handles correctly. The whole design should look like a pistol.

To cut out the trigger, cut a small piece from the back of the gun. This will hold the trigger.

And the last step is to take the elastic band and stretch it from the barrel of the gun to the end. The elastic should be 1 cm above the corner of the strip and behind the slot itself. If the elastic does not hold well in front of the barrel, make a small cutout in the front in which it will be located. Also note that when you put on the elastic, the paper may wrinkle. To prevent this from happening, glue two rods to the sides to strengthen the trunk.

Finally, you can make origami paper – shuriken bullets. Just place the corner of the shuriken between the halves of the barrel near the trigger. During the shot, the rubber band should catch and send the shuriken flying!

How to make a gun from wood You can find out not only out of love by shooting bullets from rubber bands at others. In fact, boys really love such truly masculine crafts as cars and soldiers. And in the process of sawing out and bringing a wooden gun to working condition, the little master, under strict guidance, will master all the main stages of execution, see and learn how to handle complex tools used in woodworking.

How to make a gun from wood master class

There are several videos online about how to how to make a gun from wood. Master class This one is quite complicated, so it will be simply impossible for the baby to cope alone, and even very dangerous. Think about which main stages of the entire complex technological process you cannot safely entrust to him. Maybe it will be grinding, maybe working with a chisel, or maybe tracing the outline of the future pistol will be enough.

When working with wood, it is imperative to follow the simplest safety rules. And this applies not only to children, but also to adults. Wear thick gloves, as wooden splinters are extremely unpleasant, they are difficult to remove, and the wound can bother you for a long time. In order to prevent this when working with unsanded boards, you need reliable protection for the skin of your hands. The second mandatory point is a protective mask or goggles. If splinters getting under the skin are unpleasant, then pieces of wood getting into the eyes can lead to very serious consequences. It’s better to play it safe and buy each production participant their own pair of safety glasses. At the same time, you will look like real professionals in this semi-game process.

The production of wooden pistols as a form of children's creativity already has a considerable history in terms of the years passed. What material will be equally accessible and at the same time equally easy to process, relative to metal or plastic? The boys, who always wanted and will want to imitate adults, made pistols for themselves from plywood, from school rulers, from boards, carried their toys with them for street games during the war, and took care of them. Previously, wooden and homemade toys were more likely associated with low-income families who could not afford to buy beautiful plastic toys in the store. Today, when a huge number of plastic pistols are sold in stores, no parent can be absolutely sure of the safety of both the material (toxic or not, what additives are present in the plastic) and the reliability of the design itself (fragility of plastic, small details). And wooden toys nowadays are environmentally friendly, and, like everything environmentally friendly, they are fashionable and highly valued. Especially those made by yourself.

Photo of how to make a gun from wood

Let us briefly examine the main stages and photo of how to make a gun from wood. In fact, if your dad is not into plumbing, then you probably won’t have the entire set of tools needed for either your home or your dacha. Therefore, further we will also analyze more simple ways production of quite worthy combat units. By the way, an excellent compromise for dads is to take their son to a small metalworking workshop, where they ask permission to make a toy with their son. At the same time, you will show your son what tools there are, and the time spent working together, as advertising teaches us, is simply priceless.

For the craft, we take a board that is not varnished and not treated with any chemicals. A thickness of 2-2.5 centimeters will be enough to create a high-quality pistol. On the Internet, find a picture of a small life-size pistol, print it and cut it out. Place it on the board and carefully trace the outline. It is best to do this with a ballpoint pen or an indelible thin marker, since in the future the lines should not be smudged or erased, which can lead to incorrect cutting. It is best to cut such a thick board with a band saw, which will help form a smooth and neat edge. Using a grinder, process the barrel and handle, giving them the required rounded shape. Clamp the semi-finished product in a vice and cut out the trigger. It will be convenient to use a scroll saw for this. All relief notches are made using a cutter, the trigger is up to perfect shape finish with a rasp. All small details, such as notches or patterns on the handle, are cut out using a chisel. The gun is almost ready, but its surface definitely requires proper processing, because it is intended for delicate children's hands. We sand the entire surface thoroughly. First we go over it with sandpaper, smoothing out the protrusions and irregularities, and with the help of scratch paper we polish it completely.

The finished gun can be coated with varnish, which is used specifically for working with wood, and you can also use paint for working with wood; it will create a protective film on the surface of the craft, necessary for its long and faithful service to its little owner. A little secret - before applying paint to the surface of a wooden toy, you need to first treat it with a special primer. This way, the adhesion of paint and wood will be maximum and the risk of paint chipping during play, and, therefore, further damage to the wood, will be minimal.

How to make a gun from wood: ideas

A thick board allows us to make a pistol that is closest in shape to the real thing. If everything is complicated process Since the abundance of tools and steps scares you, you can still find out how to make a gun from wood. Ideas in this case, the emphasis will be on materials that are easier to handle.

Other news

A pistol made of wood... How many childhood memories are there in this combination of words... Memories of how very young boys and girls chased each other, imagining themselves as robbers and those who caught them. The robbers "shoot" from the simplest toys from a simple piece of wood, they became the first pistols, the first toy weapons made with my own hands. This article will discuss how to make a pistol from wood.

Making weapons is not just a children's dream

If in childhood you simply took a piece of wood that was suitable in shape, now you can use special tools and make a toy that is practically no different from a real weapon. If you build the gun correctly, it will even be able to fire. made of wood can please not only boys, but also their fathers.

Let's start production

To make a “weapon” you will need: a piece of rubber drill with a drill no larger than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a gun from wood, it is worth knowing that the design of this product is divided into three elements: solid handles and barrel, pistons and rubber bands.

First of all, you will need to make the barrel and handle of the gun. They need to be cut out of wood, the thickness should be at least 2 cm. You can choose any shape.

The main thing is that you like it and be comfortable. Don’t throw away the rest of the block, you will need it later.

We continue to answer the question of how to make a gun from wood. In the finished trunk, use a drill to make a hole along the entire length. Sand the hole made thoroughly with sandpaper. To do this, you need to roll the paper into a tube and put it on a suitable stick; either a long nail or a knitting needle will do. From the remaining piece of wood you need to make a piston. It looks like a long one wooden stick, in diameter slightly less than 6 mm. There should be a slight thickening on one part of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. You need to attach an elastic band to the thickening. It or the tape must be cut from a piece bicycle camera. Instead of a wooden rod, you can simply take a long nail. His hat will serve as a sear. The nail itself must be cut to the length of the barrel, and the cut area must be sanded well with a file to completely dull it.

The finished piston is placed in the barrel of the pistol, while at the same time it is necessary to pull the rubber band onto the handle of the weapon. The sear will need to be adjusted so that when it is pulled back, the trigger is raised. You should also make sure that it can catch on the protrusion on the pistol handle. At the same time, the piston will be firmly fixed in the cocked state. The DIY gun made of wood is ready.

We fire a training salvo

You need to shoot from such a design in this way: take the pistol in your hand, thumb At the same time, the hands push the sear upward, it slides and moves the piston along the barrel. If you don’t know how to make a gun out of wood, then this article should help you achieve excellent results.

Shooting toys can be bought in a store without any problems, but you can successfully make them yourself. On the pages of the site The Secret of the Master are considered various designs cool toys from the simplest to the more complex, which, in addition to gaming and experimental purposes, can bring practical benefits, for example, in protecting crops from pests at the dacha.

How to make an office cannon with your own hands

A simple gun design invented to carry out “office wars”. The projectile is a sheet of paper or a light ball crumpled into a ball. The gun does not allow firing in a straight line, but it shoots well with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun can be easily made with your own hands from plastic bottle and stationery erasers. For details, watch the video and.

How to make a rubber gun with your own hands

Rubber gun

A simple wooden automatic three-shot pistol. The pistol fits comfortably in the hand. It is cut out of plywood with a hand jigsaw; you only need to cut out 4 parts. The gun fires rubber bands. With such a pistol it is easy to organize a small airsoft game in an apartment or on the street. We look at the drawings of the gun stencil (link at the end of the blog). Load your homemade pistol carefully according to the instructions. For safety reasons, wear safety glasses.

How to make a vortex cannon with your own hands

A wonderful weapon for children's games and experiments. The gun shoots... with air, an invisible toroidal vortex bursts out of the barrel, which moves in the direction of the shot for some distance. A safe thing for children to play with weapons and remotely “destruct” toy buildings. Design details are shown in the video and.

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on your household, then you have every opportunity to do game console to the compressor. The weapon was adapted to the available ammunition - rowan and pea, and accordingly the machine guns were called rowan launcher and pea shooter. The design of a homemade machine gun is simple. It is based on manual blowing, which makes it easy to control the weapon. For manufacturing details, see the video.

How to make a gas gun with your own hands

When repeating this design, strictly follow the safety rules. you are building gas gun at your own risk and assume ALL responsibility for the construction, use, consequences of using this device, as well as for any damage caused. The authors summarized the accumulated experience in building potato cannons and tried to use ready-made elements in the design. In total, three types of guns of different calibers were designed.

Mini gun 32 mm caliber

The gun is made by hand in the form of a pistol and shoots small balls. A reliable piezo spark source will not create problems. The gun is used for target shooting competitions. Requires some experience when loading. See production details

Gas apple-potato gun 50 mm caliber

Gas gun

This is a serious design in terms of sound and projectile. The main application is to imitate the sound of a hunting rifle shot to scare away birds. A reliable budget gun, but only if used correctly and sparingly. Strictly follow safety rules and assembly recommendations. See how to make an Apple Gun

Gas mortar 100 mm caliber

Experimental design for firing volumetric light projectiles with electronic filling. Some results are shown in the video. When repeating, do not forget that this is not a real mortar, but just a thin-walled plastic pipe. Not all planned experiments have been carried out with this gun and will be published as the results are obtained. The record height of the shot is 80 meters. The mortar in its repetition is the simplest design, see the video for details.

The topic of designing guns is not closed and will be continued.