TEBO polypropylene pipes. Advantages of TEBO Technics products

You can pick up the purchased product yourself or use the delivery service in Moscow and the Moscow region. By placing an order today, you will receive it at your disposal tomorrow. If necessary, you can use the prompt delivery service and receive your products today.

Delivery to the entrance (check with the manager about the possibility of lifting to the floor)

Delivery is made daily from 9 to 21 o'clock , including weekends and holidays.

Goods worth up to 6,000 rubles can be picked up by self-pickup.

Pickup points

For orders worth more than 6,000 rubles:

• Within the Moscow Ring Road - from 0 to 500 rubles, (individual delivery cost is indicated in the product card)
• Outside the Moscow Ring Road up to 10 km - 700 rubles,
• Beyond the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
• To the regions, delivery by a transport company (calculated individually).

Delivery cost for

km from MKAD

700 rub.

Unloading of large-sized goods is carried out by the efforts and means of the customer.

The money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and convenience of calculation.

Payment by bank card to the courier upon receipt

Couriers have a portable banking terminal, which allows clients of the Teplovod-Service company to pay for goods with bank plastic cards (check with the manager about the possibility of paying by bank card).

Payment by credit card on the website

To select payment using a bank card, on the “Cart” page, you must select the “Payment by bank card on the site” item.

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:

After clicking on the “ONLINE PAYMENT” button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter your full name, email, contact phone number, and reservation number to identify the payer. The connection to the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the Verified By Visa or MasterCard Secure Code technology for secure online payments, you may also need to enter a special password to make a payment. You can check the methods and possibility of obtaining passwords for making online payments with the bank that issued the card.

This site supports 256-bit encryption. The confidentiality of the reported personal information is ensured by Sberbank of Russia OJSC. The entered information will not be provided to third parties except in cases provided for by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, no interest is charged.

Payment is a transfer Money from the buyer's current account to the seller's account, we work on common system taxation including VAT. Delivery of goods is carried out after receipt of funds to the account of the company Teplovod-Service LLC. This method is used for calculations by legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

Taxpayer Identification Number: 5003088884

Checkpoint: 500301001

BIC: 044525225

Bank: PJSC “Sberbank of Russia”

R/s: 40702810838060011732

S/s: 30101810400000000225

Legal address: 142718, Moscow region, Leninsky district, Bulatnikovskoye rural settlement, Warsaw highway, 21 km., office B-6

Special conditions

For goods with the status "To order" worth up to RUB 100,000. no prepayment required.

For goods with the status "To order" over 100,000 rubles. An advance payment of 30% is required.

• For any item shipped transport company, 100% payment required.

TEBO pipes (PP-R-GF), reinforced with glass fiber, are multilayer and consist of three layers, PP-R (made of homogeneous polypropylene - white), PP-R-GF (made of a mixture of polypropylene and glass fiber - green color), PP-R (made of homogeneous polypropylene - white).

Their advantages:

- Lower coefficient of thermal expansion - up to 0.05 mm/m x tC

- Greater lateral rigidity of the pipe compared to PP-R pipes

- Ease of installation, because When welding pipes and fittings, no stripping is required.

Article (white color)	Outer diameter, mm	Wall thickness, mm	Section length, m	Meters per pack
030010502	20	2,8	4	100
030010503	25	3,5	4	80
030010504	32	4,4	4	40
030010505	40	5,5	4	20
030010506	50	6,9	4	20
030010507	63	8,7	4	12
030010508	75	10,3	4	8
030010509	90	12,3	4	8
030010510	110	15,1	4	4

TEBO technics pipes and fittings are made of modern Polypropylene Random Copolymer material (PP-R type 3) and are available in a wide range of diameters. Designed for installation of pipelines for various purposes: cold and hot water supply systems, heating and process pipelines for food and chemical industry, production.

TEBO technics - European production lines, European raw materials, product quality control. TEBO technics - high-tech products of excellent quality, thanks to which the consumer can obtain and use clean drinking water.

The results of laboratory and certification tests show that specifications TEBO technics pipes and fittings comply with the norms and standards of GOST, DIN, etc.

TEBO technics pipes and fittings meet the most modern requirements for products, both from the production side (manufacturability, quality, material consumption) and from the consumer side (range, reliability, durability, aesthetics).

"Random copolymer" PP-R (type 3)

Polypropylene has the following advantages that determine high quality products made from it:

• Impact resistance elevated temperature. Polypropylene is more durable than other materials used in the field.
• The absence of rust, corrosion, decay, rot, dirt, lime deposits in pipes and fittings avoids reducing the internal diameter of the pipeline and, thus, their throughput remains unchanged for a long time.
• When properly stored, it retains its original shape, strength, temperature and chemical properties.
• Shows high resistance to wide range organic and inorganic compounds.
• It has a low coefficient of friction, the surface is clean and smooth and does not retain other particles in micropores.
• Pipelines made of PP-R can be easily connected to other pipelines made from different materials (steel, copper, metal-plastic).
• The PP-R connection is easily carried out by welding (diffusion welding). This connection is very strong and does not lead to a change in the internal diameter of the pipeline.
• Pipes and fittings made of polypropylene are lightweight and easy to transport, which reduces the cost of loading and transportation. They are easy to install and safe for health.
• Due to the properties of the material and the large wall thickness, TEBO technics pipes and fittings are characterized by low transmission of noise generated when liquids flow through them.
• The low thermal conductivity of the PP-R material guarantees small heat losses during transportation of the coolant.
• Flammability group G3 (defined in accordance with GOST 30244-94 at a combustion temperature of 360C), flammability group I3 (highly flammable) according to GOST 30402-96, smoke-forming ability D3 according to GOST 12.1.004-89, clause 4.18, toxicity of combustion products T2, flame propagation group RP4 (highly spreading) according to GOST Z51032-97.
• Negative Impact ultraviolet radiation And sun rays The service life of plastic pipes has been known for a long time. TEBO technics products are manufactured with the addition of ultraviolet stabilizers, which significantly reduces the destructive effects of ultraviolet radiation and sunlight on pipes and fittings made from TEBO technics PP-R.

TEBO Technics pipes and fittings are made of modern material - Polypropylene Random Copolymer (PPR type 3) and are available in a wide range of diameters. TEBO Technics products are intended for the installation of pipelines for various purposes: cold and hot water supply systems, heating systems and process pipelines for the food and chemical industries.

TEBO Technics pipes and fittings meet the most modern requirements for products, both from the production side (manufacturability, quality, material consumption) and from the consumer side: range, reliability, durability, aesthetics.

The low thermal conductivity of the material guarantees small heat losses during transportation of the coolant.

Advantages of TEBO Technics products:

• Complete absence of corrosion, rust, dirt, rot, lime deposits, and decay products.
• No stray currents.
• The smooth internal surface of pipelines and the absence of fouling of the internal surface of the pipes allows reducing pressure losses by 30%.
• Perfect compatibility of pipes and fittings ensures the reliability of the welded connection.
• TEBO Technics pipe transmits less audible noise compared to metal pipes.
• Light weight - 9 times less than steel pipelines.
• Easy installation, reliable connections.
• Barcoding of the entire product range.
• Reliable, thoughtful, bright and informative packaging ensures complete safety of products at all stages of transportation and storage, as well as ease of warehouse navigation.
• Wide range of connecting elements.

TEBO polypropylene pipes are widely used for heating and water supply systems in residential buildings and government agencies. Plastic pipes for heating and water supply, it is much more convenient and easier to install than metal ones. When installing pipes, both for heating and water supply, it is necessary to comply with the relevant standards and carry out the necessary calculations.

At the expense of their unique characteristics TEBO polypropylene pipes for heating, hot and cold water supply are considered the most promising, and the demand for them is steadily growing. Now in most countries, including Russia, there is an active abandonment of traditional steel pipes in favor of polypropylene pipelines.

• Plumbing systems:

Polypropylene pipes are excellent for laying cold and hot water With operating temperature up to +95 degrees. The service life of pipes, with proper installation, is at least 50 years for cold water supply and 25 years for hot water supply. PN20 pipes are suitable for cold and hot water. PN10 - cold water supply only.

• Heating systems:

For heating systems organized, for example, using aluminum radiators, PN25 pipes reinforced with perforated aluminum foil, or PN20 - polypropylene pipes reinforced with glass fiber, are suitable.

The aluminum layer of the PN25 pipe ensures: a reduction in the coefficient of thermal expansion of the pipe by 5 times, to a value of 0.03 mm/m x tºC and the non-penetration of oxygen into the coolant.

TEBO Technics PN20 glass fiber reinforced pipes are three-layer: PPR, PPR GF (with Glass Fiber), PPR. Their advantages: lower coefficient of thermal expansion - up to 0.05 mm/m x tºC, greater transverse rigidity of the pipe, ease of installation, because no stripping required.

vendor code	External diameter, mm	Wall thickness, mm	Section length, mm	Quantity per package pcs.	Image
Pipe TEBO technics PN10
Pipe TEBO technics PN20
Pipe TEBO technics PN25reinforced with aluminum foil

TEBO Technics pipes and fittings are made of modern material - Polypropylene Random Copolymer (PPR type 3) and are available in a wide range of diameters. TEBO Technics products are intended for the installation of pipelines for various purposes: cold and hot water supply systems, heating systems and process pipelines for the food and chemical industries.

TEBO Technics pipes and fittings meet the most modern requirements for products, both from the production side (manufacturability, quality, material consumption) and from the consumer side: range, reliability, durability, aesthetics.

The low thermal conductivity of the material guarantees small heat losses during transportation of the coolant.

Advantages of TEBO Technics products:

• Complete absence of corrosion, rust, dirt, rot, lime deposits, and decay products.
• No stray currents.
• The smooth internal surface of pipelines and the absence of fouling of the internal surface of the pipes allows reducing pressure losses by 30%.
• Perfect compatibility of pipes and fittings ensures the reliability of the welded connection.
• TEBO Technics pipe transmits less audible noise compared to metal pipes.
• Light weight - 9 times less than steel pipelines.
• Easy installation, reliable connections.
• Barcoding of the entire product range.
• Reliable, thoughtful, bright and informative packaging ensures complete safety of products at all stages of transportation and storage, as well as ease of warehouse navigation.
• Wide range of connecting elements.

TEBO polypropylene pipes are widely used for heating and water supply systems in residential buildings and government institutions. Plastic pipes for heating and water supply are much more convenient and easier to install than metal ones. When installing pipes, both for heating and water supply, it is necessary to comply with the relevant standards and carry out the necessary calculations.

Due to their unique characteristics, TEBO polypropylene pipes for heating, hot and cold water supply are considered the most promising, and the demand for them is steadily growing. Now in most countries, including Russia, there is an active abandonment of traditional steel pipes in favor of polypropylene pipelines.

• Plumbing systems:

Polypropylene pipes are excellent for laying cold and hot water supply networks with operating temperatures up to +95 degrees. The service life of pipes, with proper installation, is at least 50 years for cold water supply and 25 years for hot water supply. PN20 pipes are suitable for cold and hot water. PN10 - cold water supply only.

• Heating systems:

For heating systems organized, for example, using aluminum radiators, PN25 pipes reinforced with perforated aluminum foil, or PN20 - polypropylene pipes reinforced with glass fiber, are suitable.

The aluminum layer of the PN25 pipe ensures: a reduction in the coefficient of thermal expansion of the pipe by 5 times, to a value of 0.03 mm/m x tºC and the non-penetration of oxygen into the coolant.

TEBO Technics PN20 glass fiber reinforced pipes are three-layer: PPR, PPR GF (with Glass Fiber), PPR. Their advantages: lower coefficient of thermal expansion - up to 0.05 mm/m x tºC, greater transverse rigidity of the pipe, ease of installation, because no stripping required.

vendor code	External diameter, mm	Wall thickness, mm	Section length, mm	Quantity per package pcs.	Image
Pipe TEBO technics PN10
Pipe TEBO technics PN20
Pipe TEBO technics PN25reinforced with aluminum foil