Motoblock texas tg 550 old model.

In order to protect the propulsion mechanism from accidental collisions with obstacles, the Texas LX550TG cultivator was equipped with a thick front bumper, which can be used as a transport handle.

As for the operating system, the forward transmission operation is carried out by means of a timing belt, the direct reverse transmission operation is carried out by means of a toothed wheel and without any belts. The machine is equipped automatic system folding of transport wheels, the fastening of which is connected to the openers and before working with the opener, the wheels are turned up.

This motor cultivator is used for working on a relatively small plot of land (no more than 10 acres), as well as for cultivating virgin land. The car has a built-in four-stroke gasoline engine PowerLine TG 585, which has proven itself in the previous release of cultivators and is in great demand on the market. The working tool of the cultivator is a rototiller system. The machine has a new exclusive design, an ergonomic chain steering wheel, foot-controlled transport wheels and a front bumper that facilitates transportation and engine protection.

New exclusive design

New gearbox - chain Ergonomic steering wheel with metal wings

The motor is located directly above the cutter axis, providing excellent balancing

Foot control of transport wheels

Front bumper to facilitate transportation and protect the engine from damage

Specifications

Guarantee:	1 year
Country of manufacture:	Denmark-China
Engine:	Power Line TG585 163 cc.
power:	5.5 hp
clutch:	belt
gearbox:	chain
number of speeds:	1 forward/1 reverse
reverse (reverse):	There is
adjustable steering column:	in 1 position
processing width (cm):	55
processing depth (cm):	up to 30
cutter diameter (cm):	25
Fuel tank capacity (l):	3,6

If you are a client of the Garden Mechanisms online store, then you can use the service of qualified pre-sale preparation of equipment. It is implemented on the basis of our own Service Center, which is authorized and certified by the world's leading manufacturers.

How the equipment starts in operating mode determines its further operation. In our case, an experienced employee Service center will perform a test run at idle speed. Especially for our clients, we will adjust and configure the equipment so that it is ready for the upcoming loads. After this, if the results of the check do not raise any complaints, the instrument is sent to its rightful owner.

What are we doing?

• checking the contents (when opening it is checked whether everything is in place)
• assembly finished product(if necessary)
• checking adjustments
• refilling equipment with oil
• lubrication control in gearboxes and gearboxes
• product launch

Everything for the Client

• Once the instrument is unpacked for pre-sale preparation, it is handled by a professional. Therefore, we can guarantee the quality of our services.
• You receive equipment that is 100% ready for use.
• Proper commissioning means excellent results in the future.

Important

When making a purchase of gas-powered tools, the managers of the Garden Mechanisms online store offer everyone the service of undergoing pre-sale training. If you wish, you can refuse this service.

In what cases are pre-sale preparations abandoned?

• If you wish, receive the product in the original packaging and open/assemble it yourself.
• If the product is intended to be given as a gift and traces of equipment operation are undesirable (remains of fuel in the tank, filled with oil, opened packaging).
• In case it is expected to be transported further, which is impossible with the product assembled. For example, it is assumed that the goods will be sent via transport company or by mail, or further transportation is planned by transport, where the assembled product does not fit in size.

Cost of pre-sale preparation

The price includes: unpacking and checking the package (when opening, check whether everything is in place), assembling the finished product (if necessary), checking adjustments, filling equipment with oil, refueling, checking lubrication in gearboxes and gearboxes, starting the product. Oils and lubricants are not included in the cost of equipment assembly.

Gasoline is poured minimum quantity. The approximate cost of assembling the product can be found in the table. The cost depends on the complexity of the assembly and the time spent on it. Please check with the manager when placing your order for conditions, terms and exact amount of assembly/pre-sale preparation. Free pre-sale preparation applies only to all products of brands and. The products of these manufacturers are marked with a special “Free pre-sale preparation” badge.

Installation and assembly of additional attachments for tractors and walk-behind tractors is paid separately and the cost depends on the type of equipment and complexity of the work. Please check with our managers for the timing and cost of this service.

Chainsaw, Trimmer (with two-stroke engine)	1000 rub.
lawnmower, motor drill, trimmer (with four-stroke engine)	1500 rub.
Garden tractor/rider	3000 rub.
snow blower, Cultivator, Motoblock	1500 rub.
Big tractor	5000 rub.

Delivery terms

Moscow and Moscow region:

Delivery is carried out the next day after ordering the goods, but there may be exceptions
- delivery time: Mon.-Fri. from 11:00 to 22:00
- delivery of goods is paid directly to the courier and only in rubles

Delivery cost in Moscow and the Moscow region:

Delivery in Moscow for orders worth less than 30,000 rubles. - 650 rub., orders over 30,000 rub. - free

Delivery in the Moscow region: delivery in Moscow + 40 rubles. for 1 km. from MKAD

Lifting goods:

Delivery of heavy and large-sized goods is made to the entrance
- delivery of oversized goods weighing up to 20 kg. produced to the apartment
- lifting the goods is possible, provided that it can be done by one person:

When lifting goods without an elevator - 100 rubles per floor, but not less than 300 rubles.
when going up by elevator - 300 rubles

Pickup:

There is no self-pickup.

Delivery to regions:

Carried out by transport companies
- payment for delivery to the transport company is carried out according to the Moscow tariff
- services of transport companies are paid by the recipient upon receipt of the goods

You can calculate the approximate cost of delivery using the calculation program on the websites of transport companies:
Business lines http://www.dellin.ru
Zheldorekspedition http://www.jde.ru
Autotrading http://www.autotrading.ru
DPD http://www.dpd.ru

Payment terms

The minimum order amount is 1000 rubles.
Minimum order amount non-cash payments 5000 rubles.

Cash payment:
You can pay for your order in cash upon delivery to the courier.
You can pay for your order in cash upon pickup.
Payment is accepted only in rubles.

Payment by bank cards:
(temporarily not accepted) pay electronically
You can pay for your order upon delivery by credit card.
This service is only available for delivery by courier in Moscow and the Moscow region or for pick-up.
If you are in another city, then to pay with a bank card, you need to select “electronic payment methods”

Rules for payment for goods from regions:
There are two ways to pay for goods delivered to other regions:
1) By bank receipt
2) Electronic payment methods

Payment by bank receipt:
After placing your order, we send you a receipt by email.
The name of the payment must indicate the product you have chosen.
After the money has been deposited into your account, we deliver the cargo to the transport company, having notified you in advance.

Electronic payment methods(without leaving home):
- Bank cards(Visa, MasterCard)

Payment by bank transfer:
Legal entities:

To pay for goods by bank transfer from our online store, we will send you an invoice using the payment method agreed with you.
The invoice and product reserve are valid for three banking days. If during this time you do not transfer funds to pay the invoice, it becomes invalid and you will need to receive a new invoice for payment. If you need to extend your reservation, you must contact us by any in a convenient way. The goods are released after funds are credited to our bank account. To receive the goods, you must provide the original power of attorney from the payer organization indicating the received material assets or certify our copy of the consignment note with the seal of the paying organization.

Please confirm payment for your order by sending a copy of the payment order.

** Due to the unstable exchange rate between the dollar and euro, prices on the website may not be current.
Please contact managers to clarify accurate information on prices, availability and reserves.
We hope for your understanding!

Texas LX 550TG is a household model of a cultivator with a gasoline engine. It is designed for plowing the soil, weeding in small garden plots. This cultivator is equipped with a set of rotary cutters with a 0.55 m grip, a motion reverse system and a transmission. In addition, this cultivator has other advantages and features.

Advantages and features of the motorized cultivator model Texas LX 550TG.

The advantages of the Texas LX 550TG cultivator are provided by its balanced, rigid and reliable design. This cultivator is equipped with a modern petrol engine from the Power Line series with air cooled. To the advantages installed motor It can be attributed to its efficiency and compliance with environmental standards. Due to the use of chain transmission, high productivity has been achieved and the reliability of the device has been increased. We have highlighted the following features of the Texas LX 550TG cultivator:

Four-stroke petrol engine - Power Line TG475;
. Starting the engine of the model is manual;
. Chain transmission;
. Movement at one speed;
. All critical parts of the structure are made of steel;
. The basic working tool is a shaft equipped with a set of rotary cutters;
. The handle is foldable;
. There is a transport wheel;
. Compact size and light weight.

More advantages of the Texas LX 550TG cultivator are hidden in its technical characteristics.

Technical parameters of the Texas LX 550TG motor cultivator.

In terms of its characteristics, the Texas LX 550TG is not inferior to professional cultivators, but unlike them, this model has a more affordable price. The main characteristics of the Texas LX 550TG model are as follows:

Installed engine power (hp) - 5.5;
. Number of gears (forward/backward) - 1/1;
. Processing depth (max) - 0.25 m;
. Processing width - 0.55 m;
. Model weight (kg) - 40.

The Texas LX 550TG cultivator is an easy-to-use, efficient and at the same time highly reliable device for performing work on personal farms. Using this device, even women can carry out work with ease. Maintenance of the model is simple and accessible to the average user, and timely maintenance guarantees its long-term operation.