How to make the edges of a plastic bottle smooth and not sharp. New life for familiar things: plastic bottles How to round the edges of a plastic bottle

Useful tips

Plastic products are used everywhere because they require less investment to create than products made from other materials.

However, discarded plastic can take hundreds or even thousands of years to decompose, so it is important to recycle it or avoid plastic altogether.

The second option is very difficult to implement today, so recycling comes to the fore. Plastic can be sent to special factories for recycling it, or you can make useful things out of it.

In this collection you will learn how to make various useful things for your home and garden from plastic bottles.

1. DIY ottoman made from plastic bottles step by step

You will need:

Plastic bottles

Foam rubber

Knitting needles

Ruler

Scissors

Sewing machine

1. Wash and dry several plastic bottles covered with caps. Gather all the bottles in a circle and secure them together with tape.

2. Cut two circles from cardboard to cover the top and bottom of all connected bottles. Tape these circles to the connected bottles.

3. Prepare two rectangular pieces of foam rubber and one round piece. Rectangular pieces need to cover the side part collected bottles, and a round piece of the upper part. Secure everything with tape.

4. Make a cover for your seat from any fabric. If you like to knit, you can knit a cover.

2. We make a faucet extension from plastic bottles with our own hands

It will be more convenient for children to wash their hands.

3. DIY products made from plastic bottles: pocket for a rag/sponge

1. Cut the bottle into the desired shape.

2. Sand the edges with sandpaper.

3. Hang on the faucet.

4. How to make a bag from plastic bottles

Photo instructions

Video instructions

5. What can be made from plastic bottles: cups for storing cosmetics

6. Feeder made of plastic bottles for a cat or dog

There are many ways to make bird feeders, but this one is designed for cats and dogs.

You will need:

2 large plastic bottles

Scissors

1. In the middle of one bottle you need to make holes slightly larger than the neck of the other bottle.

2. The second bottle needs to be cut in half crosswise.

3. Fill the bottom with food.

4. Connect the parts and open the lid.

7. Vase for sweets: master class on crafts from plastic bottles

You will need:

Plate, round plastic or thick cardboard

6 two-liter plastic bottles

Wooden or plastic rod (you can use a straight branch of suitable diameter and length)

Superglue

Spray paint and glitter (optional)

1. Making the base for the craft. To do this you need a plate, ceramic or glass plate. In the middle of the plate you need to enlarge the hole to 10 mm using a drill.

2. You will also need to use a drill to make holes in the center of the three plastic bottle pieces you will be using. It's easier to drill from the inside out.

3. Cut off the bottom of each of the 6 plastic bottles. Place 3 parts on the rod and secure with glue. Glue the remaining parts to the base (plate) around the rod. If you wish, you can spray paint everything.

It is worth noting that the rod is held on the base thanks to a plastic part that is glued to the plate, as well as to the rod itself.

4. If you wish, you can decorate your vase.

8. DIY wicker baskets from plastic bottles (master class)

And here is a version of a wicker basket made from plastic cocktail tubes:

9. Garden crafts made from plastic bottles (photo): broom

1. Remove the label from plastic bottle.

2. Using a utility knife, cut off the bottom of the bottle.

3. Start making cuts on the bottle, leaving 1 cm between each.

4. Cut off the neck of the bottle.

5. Repeat steps 1-4 with 3 more bottles. Leave one bottle with a neck.

6. Place all the cut neckless bottles on top of one necked bottle. You will have a blank for a broom.

7. Cut off the top of one bottle and place it over the resulting blank.

8. Make two holes through all the bottles and insert wire into them and wrap the ends.

9. Insert a stick or rod into the neck and secure with a nail. You can also use glue.

Video instructions

10. Modular boxes: description of crafts made from plastic bottles

You will need:

Several large plastic bottles or canisters

Stationery knife

Scissors

Marker or pencil

Strong thread.

1. Cut a suitable hole from a bottle or canister using a utility knife and/or scissors. It should not be too small for everything to fit, or too large for the plastic structure to fall apart.

2. Start connecting the bottles with a strong thread. Start with two, then add two more already connected to them, and so on. Tie strong knots. You can also try using hot glue or superglue (Moment glue).

3. Assemble a design that is convenient for you. You decide how many rows and “floors” to make. However, it is worth knowing that the higher the structure, the less stable it is. You may need to secure the entire structure with rope again.

4. It's time to put scattered things on the shelf.

By preventing plastic bottles from ending up in general trash containers or using empty lemonade containers around the house, we are helping nature. Nice? More than that! And this pleasure costs absolutely nothing! TOP 10 life hacks will help you recycle plastic profitably.

1. Saucers for goodies

The bottom of a plastic bottle can be turned into a saucer for nuts and dried fruits, which is nice to place in the living room or children's room. After cutting off the bottom, iron the edges. The finished saucer can be tied or decorated differently.

2. Tangle Tamer

You can cut out a holder for balls from a plastic bottle. It is enough to cut off a third of the bottle with the neck, thread a thread through the neck, and put the ball inside. Now, while knitting, the ball will not run away and become a victim of a playful kitten. Tell your grandma about this life hack.

3. How to open a bottle

The mere intention of opening a bottle of drink can be overwhelming. Don't be upset. Find an elastic band in the house - stationery or for hair. Wrap an elastic band (one or more) around the lid, distributing it evenly over the surface. Start unscrewing counterclockwise. The rubber band will provide good grip between the lid and the hand, and the desired result will be achieved.

4. Bottle lamp (shining water)

From a water bottle and mobile phone you can make an improvised lamp. Turn on the flashlight app on your phone, place the phone on a table or other flat surface with the screen facing down, and place a water bottle on top. The light emanating from the flashlight will be scattered in the water column and spread to the surrounding space. By connecting your phone to the network, you can work or read in front of such a lamp the whole night.

5. Decorative curtains

Curtains made from the bottoms of bottles resemble flowers floating in the air. To make these decorative curtains you only need bottle bottoms and fishing line!

6. Holder for toilet paper

Moved to new apartment Or did you not have time to hang the toilet paper holder after the renovation? A temporary compromise in this awkward situation will be a 5-liter plastic bottle. Cut off the top of the bottle, use an awl to punch two holes opposite each other, place the roll inside and thread a barbecue skewer through the holes and the sleeve of the roll.

7. Toothbrush case

To make a minimalist toothbrush holder, you only need a plastic bottle cap and double-sided tape or hot glue. We cut an opening on one side of the lid and attach the holder to the wall with the opening facing down. Ready!

8. Kitchen funnel

A device for pouring liquids, called a funnel, is not an essential item. That is why it is often missing from kitchen accessories. And if chance has once again proven that there are no trifles, get out of a difficult situation by expressly making a funnel from a plastic bottle. Cut off the top of the bottle, unscrew the cap and enjoy!

9. Disposable spoons

And from the remaining bottom part of the bottle you can cut five spoons. Trace the outline of the bottle's stem with a marker as shown in the picture, and cut out the spoon with a knife. Finish the edges with a lighter. It may not be so convenient to eat with it, but extreme situation will do!

10. Mosaic for the facade of the house

And finally, you can create a real masterpiece from plastic bottle caps. For example, decorate the facade of a house with mosaics, as did a resident of the taiga village of Kamarchaga in the Krasnoyarsk Territory.

In this series of articles, we want to help you take a fresh look at the long-familiar, everyday things that surround us, and try to give them a new bright life. Last time we talked about, and today we have an equally romantic object for crafts. Plastic bottles!

1. Containers for cosmetics or toiletries

Find some plastic bottles different colors and shapes.
Cut the bottom to the required height.
Finish the edges with a hot iron.
Use it!

2. Packaging for bulk products

If you buy cereals, pasta and other bulk products by weight, then using the neck of a plastic bottle can greatly facilitate their storage and use.

Cut off the top of the bottle.
We unscrew the plug and let the upper part of the bag inside.
We wrap the bag outward and tighten the cap.

Now it will be much more convenient for you to measure out the required amount of powder, and there will be no possibility of scattering it all over the kitchen. More visual instructions can be found in the following video.

3. Container for small items with a zipper

Cut off the bottoms of two bottles.
Using a glue gun, glue the zipper to the cut line.
Connect the two halves together.

4. Flower pots

So much can be applied here different solutions and designs that everything depends only on your imagination. We are just listing a few possible options to stir it (your imagination).

5. Safe transportation of flowers

If you want to give someone a fresh flower and don’t know how to deliver it safely, make a suitable safety cap from a plastic bottle.

6. Fruit bowl

Cut off the bottom of the bottle.
Carefully hold it over the fire so that it changes its shape.
Using a soldering iron, work the surface to create indentations that look like air bubbles.

7. Container for toys

Just one ribbon and two strings will turn a plastic bottle into a transparent container for small toys.

8. Thread holder

If you or someone close to you knits, you will appreciate this simple device made from plastic bottles, which will prevent balls of thread from flying around the room.

We hope you find some of these ideas helpful. And if you have your own experience of unusual use of used plastic bottles, then share it in the comments.

How to round the edges of a plastic bottle

How to make the edges of a plastic bottle smooth and not sharp

Master class

Many people often create vases or other interesting crafts from plastic bottles, but do not know what to do with the cut edges, how to burn them or crush them so that it would be beautiful. I’ll now tell you how to round the edges of a plastic bottle in a couple of seconds. This method is very simple and does not require a lot of auxiliary material; not everyone just knows this method.

For the mini master class, we only need an iron, naturally already heated, as well as a simple sheet of paper that will serve as a barrier to prevent the plastic bottle from sticking to the iron. I'll show you how to round the edges using an ordinary bottle as an example. We cut the plastic bottle, or rather cut off the top. We will need the lower part, the one that is larger.

Then we take a plastic bottle, place a sheet on top of it, and iron the edges along the top. Do not take too long, so that the plastic does not completely flow, we monitor the process.

At the end we should have these edges, they are neat and look great. Now you can create a vase from this plastic jar.
But remember, the denser the plastic, the longer you need to iron it, since it is difficult to melt the wide walls through the paper.

Many people very often create other interesting crafts, but do not know what to do with the cut edges, how to burn them or crush them so that it would be beautiful. I’ll now tell you how to round the edges of a plastic bottle in a couple of seconds. This method is very simple and does not require a lot of auxiliary material; not everyone just knows this method.

Then we take a plastic bottle, place a sheet on top of it, and iron the edges along the top. Do not take too long, so that the plastic does not completely flow, we monitor the process.

At the end we should have these edges, they are neat and look great. Now you can create a vase from this.
But remember, the denser the plastic, the longer you need to iron it, since it is difficult to melt the wide walls through the paper.