Eco borehole pump 1. When paying by credit card, no interest is charged

Submersible pumps for wells of the Unipump ECO series are intended for household use and are used for filing clean water from wells with a diameter of at least 110 mm, deep wells and open reservoirs. They can also be used to create systems automatic water supply private houses, dachas, etc.

The pumped liquid must not contain long-fiber inclusions.
Well pumps of the Unipamp EKO series are one of the most reliable pumps in their price category and have no analogues.

Description

• The pump body is made of stainless steel.
• The electric motor is single-phase, oil-filled.
• The flow part is centrifugal type, the impellers are “floating”, made of high-strength, wear-resistant polycarbonate.
• “Floating” impellers ensure a long service life of the pump part and reduce the likelihood of jamming when pumping water with mechanical impurities.
• The pump is equipped with a two-wire electrical cable.
• The starting capacitor and thermal relay are built into the pump housing, which greatly simplifies the installation and operation of the pump.

Buy borehole pump Unipump ECO-1

To purchase a submersible borehole pump Unipump Eco 1 in the Vodocomfort74 online store, you can add it to your cart and then spend a little time placing your order. After this, our managers will contact you. In addition, you can purchase the Unipamp EKO-1 pump at our sales office. To do this, you need to contact the manager of our company in any way (call, write a letter or a quick message at the bottom of the screen), check the availability of the pump and its characteristics. Come to the office and pay in cash.

Scope of delivery

• Submersible pump with electric cable - 1 pc.
• Starting device (only for ECO-5, ECO-6, ECO-7, ECO-8 models) - 1 pc.
• Operation manual - 1 pc.
• Packaging - 1 pc.

Equipment manufacturer: UNIPUMP (Russia-China)
Warranty: 24 months.

The submersible centrifugal pump for a well UNIPUMP ECO-1 (manufacturer - UNIPUMP) is designed to lift water from a well with a diameter of 110 mm or more. Due to its design features and the quality of the materials used, it is used for both technical and drinking water supply. As a rule, this is the provision of water to private houses, dachas, watering of personal plots, greenhouses. It is successfully used in small businesses to provide water to farms, small industries, etc.
Its differences from other pumps
- the pump body is made of high-quality stainless steel, impellers made of high-strength, wear-resistant polycarbonate
- the presence of “floating” impellers allows you to pump water from a small amount solid inclusions (clay, sand) without the risk of pump jamming.
- the source of water can be not only wells, but also wells, as well as any other natural sources or artificial reservoirs.

Specifications

Maximum flow, l/min - 80
Maximum head, m - 52
Power consumption, W -550
Current consumption, A - 4.2
Voltage, V/Hz - 220/50
Cable length, m - 20
Maximum immersion depth, m - 20
Diameter of the connection connector, inch - 1 1/4"
Dimensions - Ø 96mm x 775mm
Range of operating water temperatures, C. - from +1 to +35
Max. possible sand content, g/m3 - 100

Pressure and performance characteristics of ECO pumps

Model	Performance
	m³/hour	0	0.6	1.2	1.8	2.4	3	3.6	4.2	4.8	5.4	6	7
	l/min	0	10	20	30	40	50	60	70	80	90	100	117
ECO-0	Head, m	35	32	30	27	24	19	15	11	5	3
ESO-1		52	49	46	44	36	29	23	17	10	4
ESO-2		60	55	50	47	40	33	30	23	14	10
ESO-3		85	82	76	71	62	54	42	31	16	5
ESO-4		102	98	94	90	85	79	65	58	40	34
ECO-5		120	118	117	112	108	105	103	99	90	80	70	48
ESO-6		148	146	141	136	130	120	110	83	47
ESO-7		149	143	140	138	134	127	120	115	110	92	62
ESO-8		200	195	190	185	170	150	117	113	80	65

The package includes
Pump, pcs - 1
Hose connection-1
Operating manual, pcs. -1
Packaging containers, pcs - 1

Design and operational features

During operation, the pump does not require special maintenance; there is no need to disassemble it.
- the unique design of floating impellers allows for uninterrupted operation of the pump even in conditions of silted wells and the presence of solid impurities in the water - sand and clay, but their content should not exceed more than 100 g/m3. A higher level of their content leads to rapid wear of the pump and possible emergency situations.
- has a built-in capacitor for a smooth start.
- the composition of the floating impellers is high-strength, wear-resistant polycarbonate.
- high-quality oil seals reliably protect the electric motor from water ingress.
- the body is made of stainless steel, which increases its service life.
- the presence of thermal protection that turns off the pump when overheated.
- equipped with a high-quality oil-filled electric motor.
- the presence of a filter grid that prevents large impurities from entering the pump part

This centrifugal pump is a truly innovative design and has excellent performance characteristics. Has excellent consumer reviews. We recommend it not only as an excellent well pump, but also as a well pump.
It is worth noting that on the basis of this pump it is possible to build automatic system water supply for any facility or private household.
For successful operation you should know the following:
- before installing the pump in the well, you must make sure that the casing pipe is not broken, not bent and its diameter allows the pump to be lowered
- in front of the pump outlet should be installed check valve- if this unit operates as part of unified system water supply
- the maximum possible immersion depth is 20 m, the distance from the intake hole to the dynamic water level should not be less than 3 m, the distance to the bottom of the well or well should not be less than 1.5 m.

Important!
- it is prohibited to hang the pump by the electrical cable; for this you must use a steel or nylon cord.
- the pump should not be allowed to turn on more than 20 times per hour
More full information For information on using this equipment, see the operating instructions.

How to buy a pump

You can buy the UNIPUMP ECO-1 pump by placing an order directly on the online store website, or by calling the phone in the Contacts section. Our manager will contact you and arrange delivery or reserve the goods for pickup.
If you need a UNIPUMP ECO-1 pump in Moscow, we offer delivery throughout the city and the nearest Moscow region. For buyers from other regions of Russia - any delivery transport company or postal service by agreement.

Submersible well pumps MINI ECO series- designed for supplying clean cold water from wells with a diameter of at least 85 mm, deep wells and open reservoirs.

MINI ECO series pumps have no analogues. The pump body is made of stainless steel. The electric motor is single-phase. The flow part is centrifugal type, the impellers are “floating”, made of high-strength, wear-resistant polycarbonate. “Floating” impellers ensure a long service life of the pump part and reduce the likelihood of jamming when pumping water with mechanical impurities. The pump is equipped with a two-wire electrical cable. The starting capacitor and thermal relay are built into the pump housing, which greatly simplifies the installation and operation of the pump.

• The pumped liquid must not contain long-fiber inclusions.
• Based on UNIPUMP MINI ECO pumps, you can create automatic water supply stations.
• The pump body is made of stainless steel.
• The electric motor is single-phase. Italian sealing seals are used, which significantly increases the service life of the electric motor.
• The impellers are “floating”, made of high-strength, wear-resistant polycarbonate. “Floating” impellers ensure long service life of the hydraulic part and reduce the likelihood of jamming when pumping water with mechanical impurities.
• The pump is equipped with a two-wire electrical cable.
• The starting capacitor and thermal relay are built into the pump housing, which greatly simplifies the installation and operation of the pump.
• Electrical parameters - ~220±10% V, 50 Hz
• Operating water temperature range - +1…+40°С
• Maximum immersion depth from the water surface - 20 m
• The total amount of mechanical impurities is no more than 100 g/m³

Pressure and flow characteristics

* - the given data on maximum pressure and productivity are valid at zero suction depth and an electrical network voltage of 220V±10%.

Scope of delivery:

• Submersible pump with electric cable – 1 pc.
• Operating manual – 1 pc.
• Packaging container – 1 pc.

Order and buy the UNIPUMP MINI ECO 1 submersible well pump at an attractive price with delivery throughout Moscow, the Moscow region and the Russian Federation. Submersible well pump UNIPUMP MINI ECO 1 prices, specifications, photographs and related products. Submersible pumps with a diameter of 3" are available and can be ordered from Gidkomfort.