How to make a gun from wood: ideas. Weapons made of plywood: types of products and their features, production of construction sets, dummies, bows and stocks Drawing of the simplest pistol made of wood

Sometimes there comes a moment in the relationship between father and child when all the games and entertainment are practically running out. You have to rack your brains to find new forms of leisure in order to captivate your child as much as possible and not let him get bored. In such cases, the Internet or special printed publications, which contains a huge database of games for every taste and taking into account age characteristics.

How to make a gun from wood

One of the proven ways to engage a child can be military sports games, such as fresh air, and within a house or apartment. Moreover, most interesting game it will be if everything necessary equipment and make your own ammunition.

The key element in this type of game is weapons, and in particular all kinds of pistols and machine guns. You can use weapons purchased in a store, but the most exciting and interesting thing will be to make a pistol from wood with your own hands. This activity can interest the child and contribute to the development of new skills and abilities. At the stage of preparation for the game, the question may arise about how to make a pistol out of wood. To do this you do not need to have any supernatural powers. The whole process will not seem overly complicated.

Required materials

To do this, you will need some tools and materials that can easily be found at home or in the country: a board made of non-solid wood, a ruler, a pencil or pen, a plane, a hacksaw, a file, a vice or clamps, a wood burning machine, sandpaper and varnish. This will be quite enough to make a homemade pistol made of wood.

Some stages in the process of making a toy can be done by a child. Direct participation in the process of making a pistol will not allow him to get bored.

Another important and desirable point in making homemade weapons is a drawing of a pistol made of wood. You can easily find it on the Internet or draw it yourself, taking into account all the wishes for the future product.

Making a pistol

At the initial stage, you should take an existing board and select an area on it without knots, holes or damage. Optimal thickness wood material should be 30-40 mm. It is desirable that the wood is sufficiently dried, which will make it easier to sand at the final stage. Using a hacksaw, you need to cut out the required workpiece and carefully process its surface using a plane and sandpaper. The thickness of the board should be the same throughout its entire thickness.

Drawing selection

Having decided on the model and parameters of the pistol, you need to make a drawing of it or modify the existing one, taking into account all the nuances and wishes. It is possible to use illustrations or photographs of the weapon you like to recreate the smallest details as much as possible. You can turn to specialized forums, where they can tell you how to make a wooden pistol as similar as possible to the original.

The next step will be this: you should transfer the image of the previously made drawing to the existing workpiece, preserving all the parameters and dimensions and taking into account all the smallest details and features of the future pistol. To make it convenient to cut a wooden workpiece, it can be secured in a table vice or using clamps. This will greatly facilitate the process of making a pistol. It is worth cutting out parts not strictly according to the drawn contour, but with a little margin for finishing.

Workpiece processing

Using a file, sandpaper and a knife, it is necessary to give the product all the inherent features of a weapon, highlight all the necessary and distinctive design details, and identify the key elements of a real pistol: trigger, front sight, butt. At the final stage of processing the workpiece, a mock-up should be obtained that exactly resembles a real pistol and corresponds to the image in the drawing. The greater the similarity, the more pleasant it will be to hold such an object in your hands.

Final stage

Using sandpaper of varying degrees of coarseness, remove all unevenness and roughness and sand all sharp corners.

The presence of a grinding machine or machine can speed up the process of final processing of the workpiece. Some details can be highlighted using a wood burning device. At the final stage, to give a more aesthetically pleasing finished look, the toy should be coated with several layers of dark varnish and allowed to dry thoroughly. To add shine and gloss, the product can be polished with wax.

By doing this activity with your child, you will not only promote bonding, but also teach him how to make a gun out of wood. In the process of processing wood material, you can acquire some skills that earlier child did not possess. And, without a doubt, it is very nice to have something made with your own hands.

Today, toy stores offer such a large and colorful selection that parents are clutching their heads and children are drooling. Unfortunately, the economic situation and one’s own capabilities do not always allow one to have sufficient income to please one’s own child. a good gift. Hands and head help us! You can always make some of the toys yourself. Many craftsmen cut cars, horses, whatever they want out of wood and sell them.

Wood is a very convenient material, with minimal skill in handling it and necessary tools, a lot can be done. For girls, you can cut out dolls, furniture, dishes from it, and for boys - a car, a gun, a sword. The question of how to make weapons from wood is of great interest to them!

Wooden weapon options

In fact, you can do a lot, the main thing is, why do you need a specific thing? For a child who will play in the yard, for using weapons for their intended purpose, for role playing games, for hunting or maybe for a costume? Homemade weapons made of wood will take the shape and appearance that you desire.

If the main purpose is a game, then the main thing in this case is durability. All paint and thin fragile parts will fall off in a few days, if not immediately. When schools hold military training camps, and schoolchildren are given wooden Kalashnikov assault rifles, 50% of the guys tear off magazines on the first or second day. But these machines are made in bulk, not really caring about beauty, painting them in one color and trying to make them stronger. How to make a weapon out of wood that won't break, you ask? No way, the item will remain intact only if you do not use your product.

For roleplayers, the situation is much more complicated; they need weapons that are both beautiful and durable, so they often use other materials. If it is wood, then they make two swords or knives, one beautiful, the other durable.

Material selection and processing

The choice of material determines how much processing time will be required. Birch is a very strong and unyielding tree; it is good for making a club; without special treatment the product will be heavy. Aspen, poplar, and pine are softer and easy and pleasant to work with. Oak is rare in many regions of Russia, but if you decide to make a weapon with your own hands from wood, you are unlikely to find better material. It is easier to process than birch, lighter in weight and stronger than pine, and retains its quality well over time.

The wood for products must be free of knots, wood holes, rot, with a uniform direction of fibers, and without curvature. It is necessary to dry it, preferably in a dry room or under a canopy. It is necessary that the wood dries evenly without direct impact sun rays, otherwise it will begin to crack and bend later.

Making a Club

The simplest wooden weapon is a club or stick. What could be simpler, break off a branch - and you're done. But if you suddenly decided to take this issue seriously, you wanted to make a durable, light, comfortable product, then you are faced with the question “how”. Making a weapon out of wood according to all the rules is not easy.

For the club they choose young tree suitable sizes. They cut down closer to the root, since at the butt the fibers begin to intertwine, making the material even more durable. Next, carefully, so as not to damage the top layers, remove the bark, cut off the knots, and add the required form handle, if necessary, soak the workpiece in water or special brines for a day. Then the drying begins, a fire is lit and, using the smoke, protecting the future club from the flames, it is dried. As soon as the tree has turned black, the blackness is removed with fine sand or hard grass. This is repeated six times, the surface is smooth and dry. Even if birch was chosen, the final product will be light and durable. Such wood does not rot.

Using the same principle, our ancestors made strong arrows and spears without steel tips.

Shield and sword

How to make weapons from wood for role-playing games and historical reconstructions? If for beauty and ambience, then it is very convenient to cut out a shape from plywood with a jigsaw, smooth the edge, varnish, paint, and insert decorations. With good paint, without holding the item in your hands, it will be difficult to determine what material it is made of. For combat, it is worth making weapons from thick durable wood, with a comfortable handle so that the vibration from the impact is less transferred to the hand, otherwise you can damage the hand or simply drop the object during the first hard collision.

The shield can be made perfectly from plywood, but for combat it is better to use iron-bound or steel versions with a shock-absorbing lining. During reconstructions they usually show a wall battle in which to apply swipe into a shield is extremely difficult. A good and durable one is needed for individual combat; for all other cases, plywood is suitable.

Firearms mockups

No matter how much you would like to, make it homemade firearms it is impossible to make a tree that will shoot. Maybe for one or two shots, and it’s not a fact that the weapon won’t explode when the gunpowder explodes.

All self-propelled schemes come down to one algorithm. The tree is a frame to which the barrel is attached, a trigger mechanism with a striker, and sometimes a magazine is added. Inconvenient, short-lived, but cheap and cheerful.

Hunting weapon

Do you remember running around the yards with slingshots as a child? If you haven't run, be sure to try it, you will like it. Modern elastic materials impart such striking power to a small metal ball or pebble that, with the right skill, you can knock down targets from thirty paces. But the frame of a slingshot can be easily made of wood.

Drawings of weapons made of wood for hunting are quite common. This is how crossbows and bows are made. It's not that difficult to make a wooden frame; it requires sleight of hand and no magic. But there is an important detail that is needed to make small arms lethal and effective over long distances. For this you need shoulders that are flexible and strong, as well as a bowstring. There are old technologies for making shoulders, but nowadays it is too labor-intensive and difficult to implement at home. It is easier to use modern materials such as plastic.

It is best to make the main frame from wood, and the shoulders from flexible, rot-resistant plastic; a synthetic cord will go to the bowstring. A little decoration and paint, and you’ll get a very attractive and effective bow.

Shooting toys can be bought in a store without any problems, but you can successfully make them yourself. On the pages of the site The Secret of the Master are considered various designs cool toys from the simplest to the more complex, which, in addition to gaming and experimental purposes, can bring practical benefits, for example, in protecting crops from pests at the dacha.

How to make an office cannon with your own hands

A simple gun design invented to carry out “office wars”. The projectile is a sheet of paper or a light ball crumpled into a ball. The gun does not allow firing in a straight line, but it shoots well with a canopy, which allows you to bypass obstacles in the form of office partitions;). The gun can be easily made with your own hands from plastic bottle and stationery erasers. For details, watch the video and.

How to make a rubber gun with your own hands

Rubber gun

A simple wooden automatic three-shot pistol. The pistol fits comfortably in the hand. It is cut out of plywood with a hand jigsaw; you only need to cut out 4 parts. The gun fires rubber bands. With such a pistol it is easy to organize a small airsoft game in an apartment or on the street. We look at the drawings of the gun stencil (link at the end of the blog). Load your homemade pistol carefully according to the instructions. For safety reasons, wear safety glasses.

How to make a vortex cannon with your own hands

A wonderful weapon for children's games and experiments. The gun shoots... with air, an invisible toroidal vortex erupts from the barrel, which moves in the direction of the shot for some distance. A safe thing for children to play with weapons and remotely “destruct” toy buildings. Design details are shown in the video and.

How to make a pneumatic machine gun with your own hands

If you have an air compressor with a receiver on your household, then you have every opportunity to do game console to the compressor. The weapon was adapted to the available ammunition - rowan and pea, and accordingly the machine guns were called rowan launcher and pea launcher. The design of a homemade machine gun is simple. It is based on manual blowing, which makes it easy to control the weapon. For manufacturing details, see the video.

How to make a gas gun with your own hands

When repeating this design, strictly follow the safety rules. you are building gas gun at your own risk and assume ALL responsibility for the construction, use, consequences of using this device, as well as for any damage caused. The authors summarized the accumulated experience in building potato cannons and tried to use ready-made elements in the design. In total, three types of guns of different calibers were designed.

Mini gun 32 mm caliber

The gun is made with your own hands in the form of a pistol and shoots small balls. A reliable piezo spark source will not create problems. The gun is used for target shooting competitions. Requires some experience when loading. See production details

Gas apple-potato gun 50 mm caliber

Gas gun

This is a serious design in terms of sound and projectile. The main application is to imitate the sound of a hunting rifle shot to scare away birds. A reliable budget gun, but only if used correctly and sparingly. Strictly follow safety rules and assembly recommendations. See how to make an Apple Gun

Gas mortar 100 mm caliber

Experimental design for firing volumetric light projectiles with electronic filling. Some results are shown in the video. When repeating, do not forget that this is not a real mortar, but just a thin-walled plastic pipe. Not all planned experiments have been carried out with this gun and will be published as the results are obtained. The record height of the shot is 80 meters. The mortar in its repetition is the simplest design, see the video for details.

The topic of designing guns is not closed and will be continued.

How to make a gun from wood You can find out not only out of love by shooting bullets from rubber bands at others. In fact, boys really love such truly masculine crafts as cars and soldiers. And in the process of sawing out and bringing a wooden gun to working condition, the little master, under strict guidance, will master all the main stages of execution, see and learn how to handle complex tools used in woodworking.

How to make a gun from wood master class

There are several videos online about how to how to make a gun from wood. Master class This one is quite complicated, so it will be simply impossible for the baby to cope alone, and even very dangerous. Think about which main stages of the entire complex technological process you cannot safely entrust to him. Maybe it will be grinding, maybe working with a chisel, or maybe tracing the outline of the future pistol will suffice.

When working with wood, it is imperative to follow the simplest safety rules. And this applies not only to children, but also to adults. Wear thick gloves, as wooden splinters are extremely unpleasant, they are difficult to remove, and the wound can bother you for a long time. In order to prevent this when working with unsanded boards, you need reliable protection for the skin of your hands. The second mandatory point is a protective mask or goggles. If splinters getting under the skin are unpleasant, then pieces of wood getting into the eyes can lead to very serious consequences. It’s better to play it safe and buy each production participant their own pair of safety glasses. At the same time, you will look like real professionals in this semi-game process.

Production wooden pistols As a type of children's creativity, it already has a considerable history in terms of the years passed. What material will be equally accessible and at the same time equally easy to process, relative to metal or plastic? The boys, who always wanted and will want to imitate adults, made pistols for themselves from plywood, from school rulers, from boards, carried their toys with them for street games during the war, and took care of them. Previously, wooden and homemade toys were more likely associated with low-income families who could not afford to buy beautiful plastic toys in the store. Today, when a huge number of plastic pistols are sold in stores, no parent can be absolutely sure of the safety of both the material (toxic or not, what additives are present in the plastic) and the reliability of the design itself (fragility of plastic, small details). And wooden toys in our time are environmentally friendly, and, like everything environmentally friendly, they are fashionable and highly valued. Especially those made by yourself.

Photo of how to make a gun from wood

Let us briefly examine the main stages and photo of how to make a gun from wood. In fact, if your dad is not into plumbing, then you probably won’t have the entire set of tools needed for either your home or your dacha. Therefore, further we will also analyze more simple ways production of quite worthy combat units. By the way, an excellent compromise for dads is to take their son to a small metalworking workshop, where they ask permission to make a toy with their son. At the same time, you will show your son what tools there are, and the time spent working together, as advertising teaches us, is simply priceless.

For the craft, we take a board that is not varnished and not treated with any chemicals. A thickness of 2-2.5 centimeters will be enough to create a high-quality pistol. On the Internet, find a picture of a small life-size pistol, print it and cut it out. Place it on the board and carefully trace the outline. It is best to do this with a ballpoint pen or an indelible thin marker, since in the future the lines should not be smeared or erased, which can lead to incorrect cutting. It is best to cut such a thick board with a band saw, which will help form a smooth and neat edge. Using a grinder, process the barrel and handle, giving them the required rounded shape. Clamp the semi-finished product in a vice and cut out the trigger. It will be convenient to use a scroll saw for this. All relief notches are made using a cutter, the trigger is up to perfect shape finish with a rasp. All small details, such as notches or patterns on the handle, are cut out using a chisel. The gun is almost ready, but its surface definitely requires proper processing, because it is intended for delicate children's hands. We sand the entire surface thoroughly. First we go over it with sandpaper, smoothing out the protrusions and irregularities, and with the help of scratch paper we polish it completely.

The finished gun can be coated with varnish, which is used specifically for working with wood, and you can also use paint for working with wood; it will create a protective film on the surface of the craft, necessary for its long and faithful service to its little owner. Little secret- before applying paint to the surface of a wooden toy, you need to first treat it with a special primer. This way, the adhesion of paint and wood will be maximum and the risk of paint chipping during play, and, therefore, further damage to the wood, will be minimal.

How to make a gun from wood: ideas

A thick board allows us to make a pistol that is closest in shape to the real thing. If everything is complicated process Since the abundance of tools and steps scares you, you can still find out how to make a gun from wood. Ideas in this case, the emphasis will be on materials that are easier to handle.

Other news