How to install downloaded games on xbox 360.

It's no secret that consoles are very expensive pleasure. You need to spend a significant amount on purchasing the device itself, buy additional gamepads for it, external hard drives, and so on. Moreover, the games themselves are quite expensive, and this is precisely what main problem. However, unlike a computer, where, if you wish, you can always download a pirated version of the game and enjoy gameplay practically without any problems, with consoles everything is not so simple. They don't read pirated versions of games at all, so you definitely need to buy expensive licensed products.

Fortunately, if you really want to have a console rather than a personal computer, there are special firmwares that allow you to install pirated games on consoles. However, it is worth noting that flashing a console is very difficult, so it is extremely rare that people take on this task themselves. In most cases, they purposefully purchase a firmware console so that they can immediately run pirated games. However, before launching, there is one more thing to solve important problem: How to install games on Xbox 360 Freeboot? After all, you can’t just go to “torrents” from the console, like from a computer, and then download the game you want. You will have to do all this in a much more complex way. But at the same time this method is available to everyone, so you don’t have to contact specialists, as is the case with console firmware. Well, it's time to find out how to install games on Xbox 360 Freeboot.

Preparation

If you decide to figure out how to install games on Xbox 360 Freeboot, then you need to first prepare everything you need. Luckily, you don't need many different tools. All you need is the console itself with the firmware installed, a flash drive up to eight gigabytes in size for recording the games you are interested in on it (the size should not be smaller, since otherwise not a single game will fit on it) and access to a computer on which you can download games you are interested in, formatting a flash drive and other operations necessary to understand how to install games on Xbox 360 Freeboot. So, if you have prepared everything you need, then it’s time to move on to the step-by-step instructions for installing the game on a firmware console.

Preparing a flash drive

To be able to install games in Russian, English and other languages on the Xbox 360 Freeboot, you will need external media. This can be either a flash drive or an external hard drive, but they must meet several conditions. Firstly, as mentioned earlier, the size of the drive should not be less than eight gigabytes in order for full-fledged games to fit on it. Secondly, the media format must be exclusively FAT32, only your console can recognize it. To obtain this format, it is recommended to format the flash drive using a standard Windows tool. During formatting, you simply select the FAT32 format and wait a few seconds, after which the clean and formatted flash drive will be ready for use. further work, that is, installing games on an Xbox 360 Freeboot flash drive.

Loading games onto storage media

Installing GOD games on Xbox 360 Freeboot is carried out exclusively from removable media, which is your flash drive or your external hard drive. However, in order to install the game, you must first burn it to your disk. You don't need to use any special programs to do this, just copy and paste the game files. Just make sure that you download the game that is suitable for your console model, as well as your firmware version. Otherwise you may experience compatibility issues. It is also recommended to create a shared folder for games on a flash drive, where you will add individual games that do not contain additional folders. This means that the path to the game files should be as short as possible, so you can guarantee maximum performance.

Installing the game

So, it's time to consider the most important question: how to install the game on a firmware console? To do this, you need to connect the flash drive with the game files to the console, and then turn it on. In the menu that appears, you need to find the “Programs” item. When you open it, a new menu will appear in front of you, where you need to select the “Explorer” item. As a result, a standard “Explorer” screen will appear in front of you, divided into two parts. On the left side, open your flash drive and go to the games folder, and on the right side, open the folder in which you store games on the hard drive of the console itself. After that, select the game on the flash drive on the left and start copying it to the folder on the right. Once the copying process is complete, you can finally relax as your game is installed on your console. However, you won't be able to launch it right away. Why? The fact is that so far it only represents files on the hard drive. Now you will learn how to fix this.

Console scan

When you are done installing the game, you will need to return to the main menu, from there go to the settings menu and select “Content Settings” there. A window will open in front of you in which you need to go to the “Scanning” tab and simply click on the “Scan” button. This will start a process that will check all the files present on the hard drive and if it finds new files, it will process them accordingly. So, if you did everything correctly, the scan will recognize in the files that you copied to the console, full game and add it to the list. That's all, now you can enjoy any games for one, games for two and anything else you want to install.

Common problems

But before you start trying out games for two with your friends, whom you invite specifically for this purpose, you should conduct a test run. Because sometimes it happens that even if all the rules are followed, problems arise with launching. For example, sometimes the console may not recognize your game during scanning. In this case, you need to check in the same “Content Settings” that the specified path is correct for your games. If your console doesn’t even see the flash drive, then you should check its format. Better yet, format it from scratch, choosing the format mentioned above.

Which a self-respecting gamer simply cannot miss. It’s good if you are not limited in funds and can afford to buy all new products immediately after their release, but what about less wealthy users? This article is especially for them, in it we will figure out how to play on the Xbox 360 from a flash drive.

With some simple manipulations, you can launch the toy on the Xbox 360 from a USB drive.

Let’s be clear right away, there’s no way to pirate the factory firmware, that’s for sure. The only exceptions are free add-ons for already purchased games, but that’s not about that now. To be able to run a game that you downloaded from the Internet and recorded on a flash drive, you need to reflash our Xbox with the Freeboot modification. It will not be possible to flash the device without special tools, so we contact any specialist in your city, and they will do everything for you for a small fee.

If you understand this point, then let’s start recording.

Preparing the flash drive

How to prepare a flash drive for Xbox 360? First, we definitely need to format the drive with the FAT32 file system. This is the only way to do it, otherwise Xbox won’t see the . To do this, insert the drive into the port on your personal computer or laptop, go to “My Computer,” look for our flash drive and click on the left mouse button. will appear context menu, where we need to select the “Format” item. In the window that appears, specify the file system, check the “Quick format” checkbox and wait for the process to complete. One could say that this is where all the manipulations are completed, but then some users have problems, so let’s look at copying files in more detail.

In the most general case, it is enough to create a “Games” folder on a flash drive and transfer the files of all the necessary games there. Please note that the folder should be called exactly that and you need to transfer not images, but files, that is, the image needs to be unpacked. Not everyone knows how best to do this, so we will immediately use a specialized program, although we can do without it.

We will use two programs: ISO2GOD and WX360, with the first we will convert the image from one extension to another if necessary, and with the second we will unpack the archive. So, we downloaded the image, of which there are plenty on the Internet, and launched WX360. We see this window:

First, we add our image to the program using the button of the same name. All files and folders of this image will appear in the information field; we need to select all files except the first one, as shown in the screenshot. Click the “Extract” button and point the final directory to the folder “flash drive letter/Games/Game name”.

The image extension will not always be suitable for the program, therefore, you will not be able to unpack it, which is why we indicated the ISO2GOD program. There is nothing complicated in using it, after launching it is enough to add an ISO image to processing and get a GOD image as an output, after which you can launch WX360.

Let's start the game

There should be no pitfalls in launching games on the Xbox 360 from a flash drive, just insert the finished flash drive into the console, launch the “Game Discovery” search mode, the game you downloaded should appear in the search results. In this case, all system calls will go to the flash drive; for performance reasons it would be nice to transfer the game to hard drive devices. This is not very difficult to do, which we will talk about under the next heading.

Copying the game to the Xbox hard drive

As a rule, Freeboot has a built-in Freestyle launcher; below is a screenshot to make it clear what we are talking about.

How to open a flash drive on Xbox 360? You need to go to the “Programs” section and find the “Explorer” item. This is the most common explorer that will help us copy the necessary files to the Xbox hard drive. Two identical windows will open. The folders we need are: USB0 and USB1, the first folder is the hard drive, the second is our flash drive. In the left window, open the flash drive, and in the right window, open the hard drive. In the hard drive window, go to the Content/0000000000 folder. We will copy the game files there. In the flash drive window, select the folder with the game using the “X” key on the gamepad, hold down the “RB” key, an arrow mark will appear, which means the files can be transferred, confirm your choice with the “A” key. This completes the transfer, do not forget to restart the console.

Today we’ll talk about the console from Microsoft, which cannot leave anyone indifferent, and how not to pay huge sums for games. So, free games on Xbox 360 - myth or reality? In fact, there are free applications on the Xbox and they can be obtained quite legally; below we will consider several options, including for the console without flashing it. But first, without betraying traditions, about terminology.

Xbox 360 is the second console released by Microsoft and announced in May 2005 on the MTV channel, whose competitors are consoles with the 7th generation platform Sony PlayStation 3 and Nintendo Wii.

Xbox One– already the third console from Microsoft, was announced in a number of countries in May 2013, and went on sale in Russia in September 2014. Direct competitors are consoles with the 8th generation platform - Sony PlayStation 4 and Nintendo Wii U.

The article will also tell you how to get free games on Xbox and how to download for free from various resources.

MarketPlace on Windows 10

Microsoft has paid great attention to games in Windows 10, introducing the ability to enjoy high-quality graphics for free without having a console. All this is of course good, you say, but how can you download games on the Xbox 360 for free if you have a console? Easily! The point is that it is enough to have just one account which is suitable for everyone Microsoft consoles, including for Windows 10. So, Xbox 360 accounts with games are one of the first ways to get exciting applications for free. Everything downloaded to your account is available immediately on all devices. Let's get started:

As soon as the information about the application opens, pay attention to the condition of receipt, it should say “Free”:

Click with the left mouse button (hereinafter LMB) “Get”.

We return to the “Start” panel and in the “Recently Added” section we see the newly downloaded one.

Xbox app on Windows 10

As mentioned above, you can and should use the same account for the convenience of storing applications and visibility on different devices. It is not physically possible to announce the entire list of free games for the Xbox 360. In this regard, we will show you where you can watch and download necessary game, as well as other features of the Xbox app on Windows 10. Go back to the Start panel:

We find green sign Xbox.

If you have not previously logged in/registered, then you need to authenticate/register accordingly.

I would immediately like to say about the possibility of exchanging games (from computer to console and back)

Another possibility for data exchange:

So, about how and what free games you can get on Xbox 360:

Official website

In general, this method is known to many users of Microsoft consoles, but we will still briefly describe the possibility of getting free games. Follow the link to the official website https://www.xbox.com.

Freeboot

The term freeboot translated from English means free download, this is what most console owners are interested in and this is quite obvious. The cost of the console is paid once, but you want to update the games periodically. We always remind you that you should not download programs and applications from dubious resources, as this is a direct threat to system security. Virus attacks threaten not only software, but also hardware. We will focus on a number of possibilities, so you can download free games on Xbox 360 freeboot using torrents. Again, there are at least two ways.

Method 1

You can use the MediaGet application - free license and Russified, download from the official website http://mediaget.com.
Installation is easy in a few clicks, after installation, run MediaGet.

Select “Games” as in the screenshot → in the search bar, enter the query without quotes “Xbox” → → the result will be a huge list of games for the Xbox 360.

Pay attention to the filter in the upper right corner; here you can select the option for which console the download will be carried out.

Method 2

Use sites with many torrents, here are just 2 of them:

http://game-torrento.org/load/igry/xbox_360/20.
http://www.pristavkitut.ru/tcatalog/62.

The download process is quite simple: click on the desired game → going to the download page, click “Download” with the torrent icon.

Transfer to the console without firmware

Ask how to transfer all this to the console without firmware, the answer is simple. To do this you will have to do a number of manipulations, but it is free. Let's get started.

First you need to get a recording disk from Verbatim - 8.5 Gb.
Download and run the Burner MAX Payload Tool program - it weighs very little and does not require installation.
We download in XGD3 format - as a rule, there are 2 files, one of which has the extension *.iso, and the other - *.dvd.
Before burning free games for Xbox 360 with a drive without firmware, download the ImgBurn utility. Download link. Burns dual-layer discs and many formats, creates ISO and DVD images.

Let's start recording:

Insert a blank disc and enable Burner MAX Payload Tool.
Select the drive model in the drop-down window.
Click on the “Burner max” button.
While recording, do not leave the computer and make sure that the disk is filled to its full size, which should be 8.13 Gb - this is necessary in order to check the disk for suitability. If an error occurs at step 5, there may be two reasons: either the purchased disk is not suitable, or the drive is not suitable. This step is extremely important before recording.
If all steps are completed without errors, click “Record”.

This concludes the article with step by step instructions O free applications on a Microsoft console.
Quick walkthroughs!

Have a great day!

Gaming Xbox console 360 is rightfully considered one of best devices for organizing home leisure. Even now, when the next generation of consoles has already been presented on the market, the Xbox 360 remains in demand and is still sold in stores, and all developers are trying to release their games on both new and old editions of consoles. Microsoft Company also still supports its product, releasing regular updates and adding certain functions.

As part of the Windows ecosystem, the Xbox 360 has a wide range of capabilities to interact with other devices. So, in addition to synchronizing with Windows computers and phones through Smartglass applications, the set-top box can work with various peripheral devices and removable media. This allows you to play on Xbox 360 from a flash drive and other media on which the game was recorded. Any household flash drive that is used to record data from a computer can be suitable as additional storage for a set-top box. To use this function, you need to study the procedure for preparing the drive, and also learn how to download and open games from removable media.

Quick navigation through the article

Preparation

It's important to mention that some flash cards still cannot be used as a secondary drive for Xbox. This is due to the speed of data recording and, in general, to the class of the device. To test the card and prepare it for further use, you will need:

Make sure that all important contents from the flash drive are copied to the computer.
Insert the removable disk into the USB port of the switched on console.
Agree to prepare the flash drive and format it.
Wait for the operation to complete.

Once the procedure is complete, Xbox will let you know if the USB drive was successfully prepared and is suitable for recording games.

Download

Now you should proceed to downloading games to the installed flash drive. This procedure will not cause any difficulties for those players who have already purchased digital copies of games on Xbox Live. First, you need to use the search function to find the game you are interested in and go to its page.

Once you get to the application page, you will need to purchase it. Here the procedure is standard - the console will prompt you to select a payment method and confirm the payment. At the next stage, where the “Download Now” button usually appears and information about the downloaded files (their size and description of the content) is displayed, there is a line showing where the files are saved. This parameter can be changed by indicating to the console that the game should be recorded on a removable disk.

It is important to remember that some developers prohibit working from removable media and require a special hard drive for the Xbox 360. This mainly applies to those games that are aimed at network interaction between players.

Launch

The process of launching games from an external drive is no different from the usual procedure. The user needs to go to the “Games” tab and look at the list installed applications. Games from a flash drive will be on a par with those downloaded to the console memory or recorded on a disc inserted into the drive.

IN lately Console owners are increasingly faced with the question of where to get the funds for all the new games they want to play. Discs are becoming more expensive, and interesting games come out quite often, so one of the ideal solutions could be playing on Xbox from a flash drive. Unfortunately, in order to run the game from a USB drive, you need to change the console firmware.

The factory firmware of the Xbox 360 is equipped with security and region blocking systems that will prevent you from playing downloaded games and can create problems with discs that are not labeled in the region in which the console was purchased. For example, discs distributed in the CIS will not work with American and Japanese consoles.

In order to get rid of these inconveniences and be able to play on Xbox from a flash drive, you will need to install the Freeboot firmware. It is suitable for all consoles released before 2014, including XBOX 360 Slim Corona 9.6A. Flashing services are provided in most cities, so if your console has not yet been flashed, look for an opportunity to do this in your city.

Loading a game onto a flash drive

If your console already has Freeboot firmware, the next steps will be easy to complete yourself.

Format the flash drive in the system. To do this:
- connect the flash drive and right-click on its icon in Explorer;
- select “Format”, in the “File system” field select “FAT32”;
- click "Start".

Remember: formatting will delete all data from the drive!

If the program does not read the desired image, that’s okay. This means that the image does not fit Freeboot firmware and needs to be converted. To do this, you need to download and install ISO2GOD, run it and open the image in it using the “Add ISO” button. Select the desired image, the folder where the converted version will be written and click “Save ISO”. The image will appear in the list and you can convert it.

Once the game has finished recording, safely remove the drive. Now you can run the game from a flash drive on your Xbox.

Launching the game on the console

Insert the USB flash drive and run the program
Select the game detection mode – “Game Discovery”. Once the program finishes scanning the flash drive, you will see a list of games you have downloaded.
Launch the one you need and enjoy!

Now you know how to launch a game from a flash drive on the Xbox 360. This method will help you save money and nerves, it is as simple and convenient as possible. Don't forget that the flash drive must be capacious enough to fit all your games.