With this video I begin a series of lessons dedicated to systems of equations. Today we will talk about solving systems of linear equations addition method- this is one of the most simple ways, but at the same time one of the most effective.

The addition method consists of three simple steps:

1. Look at the system and choose a variable that has identical (or opposite) coefficients in each equation;
2. Perform algebraic subtraction (for opposite numbers - addition) of equations from each other, and then bring similar terms;
3. Solve the new equation obtained after the second step.

If everything is done correctly, then at the output we will get a single equation with one variable— it won’t be difficult to solve it. Then all that remains is to substitute the found root into the original system and get the final answer.

However, in practice everything is not so simple. There are several reasons for this:

• Solving equations using the addition method implies that all lines must contain variables with equal/opposite coefficients. What to do if this requirement is not met?
• Not always, after adding/subtracting equations in the indicated way, we get a beautiful construction that can be easily solved. Is it possible to somehow simplify the calculations and speed up the calculations?

To get the answer to these questions, and at the same time understand a few additional subtleties that many students fail at, watch my video lesson:

With this lesson we begin a series of lectures devoted to systems of equations. And we will start from the simplest of them, namely those that contain two equations and two variables. Each of them will be linear.

Systems is 7th grade material, but this lesson will also be useful for high school students who want to brush up on their knowledge of this topic.

In general, there are two methods for solving such systems:

1. Addition method;
2. A method of expressing one variable in terms of another.

Today we will deal with the first method - we will use the method of subtraction and addition. But to do this, you need to understand the following fact: once you have two or more equations, you can take any two of them and add them to each other. They are added member by member, i.e. “X’s” are added to “X’s” and similar ones are given, “Y’s” with “Y’s” are similar again, and what is to the right of the equal sign is also added to each other, and similar ones are also given there.

The results of such machinations will be a new equation, which, if it has roots, they will certainly be among the roots of the original equation. Therefore, our task is to do the subtraction or addition in such a way that either $x$ or $y$ disappears.

How to achieve this and what tool to use for this - we’ll talk about this now.

Solving easy problems using the addition method

So, we learn to use the addition method using the example of two simple expressions.

Task No. 1

\[\left\( \begin(align)& 5x-4y=22 \\& 7x+4y=2 \\\end(align) \right.\]

Note that $y$ has a coefficient of $-4$ in the first equation, and $+4$ in the second. They are mutually opposite, so it is logical to assume that if we add them up, then in the resulting sum the “games” will be mutually destroyed. Add it up and get:

Let's solve the simplest construction:

Great, we found the "x". What should we do with it now? We have the right to substitute it into any of the equations. Let's substitute in the first:

\[-4y=12\left| :\left(-4 \right) \right.\]

Answer: $\left(2;-3 \right)$.

Problem No. 2

\[\left\( \begin(align)& -6x+y=21 \\& 6x-11y=-51 \\\end(align) \right.\]

The situation here is completely similar, only with “X’s”. Let's add them up:

We have the simplest linear equation, let's solve it:

Now let's find $x$:

Answer: $\left(-3;3 \right)$.

Important points

So, we have just solved two simple systems of linear equations using the addition method. Key points again:

1. If there are opposite coefficients for one of the variables, then it is necessary to add all the variables in the equation. In this case, one of them will be destroyed.
2. We substitute the found variable into any of the system equations to find the second one.
3. The final response record can be presented in different ways. For example, like this - $x=...,y=...$, or in the form of coordinates of points - $\left(...;... \right)$. The second option is preferable. The main thing to remember is that the first coordinate is $x$, and the second is $y$.
4. The rule of writing the answer in the form of point coordinates is not always applicable. For example, it cannot be used when the variables are not $x$ and $y$, but, for example, $a$ and $b$.

In the following problems we will consider the technique of subtraction when the coefficients are not opposite.

Solving easy problems using the subtraction method

Task No. 1

\[\left\( \begin(align)& 10x-3y=5 \\& -6x-3y=-27 \\\end(align) \right.\]

Note that there are no opposite coefficients here, but there are identical ones. Therefore, we subtract the second from the first equation:

Now we substitute the value $x$ into any of the system equations. Let's go first:

Answer: $\left(2;5\right)$.

Problem No. 2

\[\left\( \begin(align)& 5x+4y=-22 \\& 5x-2y=-4 \\\end(align) \right.\]

We again see the same coefficient of $5$ for $x$ in the first and second equations. Therefore, it is logical to assume that you need to subtract the second from the first equation:

We have calculated one variable. Now let's find the second one, for example, by substituting the value $y$ into the second construction:

Answer: $\left(-3;-2 \right)$.

Nuances of the solution

So what do we see? Essentially, the scheme is no different from the solution of previous systems. The only difference is that we do not add equations, but subtract them. We are doing algebraic subtraction.

In other words, as soon as you see a system consisting of two equations in two unknowns, the first thing you need to look at is the coefficients. If they are the same anywhere, the equations are subtracted, and if they are opposite, the addition method is used. This is always done so that one of them disappears, and in the final equation, which remains after subtraction, only one variable remains.

Of course, that's not all. Now we will consider systems in which the equations are generally inconsistent. Those. There are no variables in them that are either the same or opposite. In this case, to solve such systems, an additional technique is used, namely, multiplying each of the equations by a special coefficient. How to find it and how to solve such systems in general, we’ll talk about this now.

Solving problems by multiplying by a coefficient

Example #1

\[\left\( \begin(align)& 5x-9y=38 \\& 3x+2y=8 \\\end(align) \right.\]

We see that neither for $x$ nor for $y$ the coefficients are not only mutually opposite, but also in no way correlated with the other equation. These coefficients will not disappear in any way, even if we add or subtract the equations from each other. Therefore, it is necessary to apply multiplication. Let's try to get rid of the $y$ variable. To do this, we multiply the first equation by the coefficient of $y$ from the second equation, and the second equation by the coefficient of $y$ from the first equation, without touching the sign. We multiply and get a new system:

\[\left\( \begin(align)& 10x-18y=76 \\& 27x+18y=72 \\\end(align) \right.\]

Let's look at it: at $y$ the coefficients are opposite. In such a situation, it is necessary to use the addition method. Let's add:

Now we need to find $y$. To do this, substitute $x$ into the first expression:

\[-9y=18\left| :\left(-9 \right) \right.\]

Answer: $\left(4;-2 \right)$.

Example No. 2

\[\left\( \begin(align)& 11x+4y=-18 \\& 13x-6y=-32 \\\end(align) \right.\]

Again, the coefficients for none of the variables are consistent. Let's multiply by the coefficients of $y$:

\[\left\( \begin(align)& 11x+4y=-18\left| 6 \right. \\& 13x-6y=-32\left| 4 \right. \\\end(align) \right .\]

\[\left\( \begin(align)& 66x+24y=-108 \\& 52x-24y=-128 \\\end(align) \right.\]

Our new system is equivalent to the previous one, however, the coefficients of $y$ are mutually opposite, and therefore it is easy to apply the addition method here:

Now let's find $y$ by substituting $x$ into the first equation:

Answer: $\left(-2;1 \right)$.

Nuances of the solution

The key rule here is the following: we always multiply only by positive numbers- this will save you from stupid and offensive mistakes associated with changing signs. In general, the solution scheme is quite simple:

1. We look at the system and analyze each equation.
2. If we see that neither $y$ nor $x$ the coefficients are consistent, i.e. they are neither equal nor opposite, then we do the following: we select the variable that we need to get rid of, and then we look at the coefficients of these equations. If we multiply the first equation by the coefficient from the second, and the second, correspondingly, multiply by the coefficient from the first, then in the end we will get a system that is completely equivalent to the previous one, and the coefficients of $y$ will be consistent. All our actions or transformations are aimed only at getting one variable in one equation.
3. We find one variable.
4. We substitute the found variable into one of the two equations of the system and find the second.
5. We write the answer in the form of coordinates of points if we have variables $x$ and $y$.

But even such a simple algorithm has its own subtleties, for example, the coefficients of $x$ or $y$ can be fractions and other “ugly” numbers. We will now consider these cases separately, because in them you can act somewhat differently than according to the standard algorithm.

Solving problems with fractions

Example #1

\[\left\( \begin(align)& 4m-3n=32 \\& 0.8m+2.5n=-6 \\\end(align) \right.\]

First, notice that the second equation contains fractions. But note that you can divide $4$ by $0.8$. We will receive $5$. Let's multiply the second equation by $5$:

\[\left\( \begin(align)& 4m-3n=32 \\& 4m+12.5m=-30 \\\end(align) \right.\]

We subtract the equations from each other:

We found $n$, now let’s count $m$:

Answer: $n=-4;m=5$

Example No. 2

\[\left\( \begin(align)& 2.5p+1.5k=-13\left| 4 \right. \\& 2p-5k=2\left| 5 \right. \\\end(align )\right.\]

Here, as in the previous system, there are fractional coefficients, but for none of the variables do the coefficients fit into each other an integer number of times. Therefore, we use the standard algorithm. Get rid of $p$:

\[\left\( \begin(align)& 5p+3k=-26 \\& 5p-12.5k=5 \\\end(align) \right.\]

We use the subtraction method:

Let's find $p$ by substituting $k$ into the second construction:

Answer: $p=-4;k=-2$.

Nuances of the solution

That's all optimization. In the first equation, we did not multiply by anything at all, but multiplied the second equation by $5$. As a result, we received a consistent and even identical equation for the first variable. In the second system we followed a standard algorithm.

But how do you find the numbers by which to multiply equations? After all, if we multiply by fractions, we get new fractions. Therefore, the fractions must be multiplied by a number that would give a new integer, and after that the variables must be multiplied by coefficients, following the standard algorithm.

In conclusion, I would like to draw your attention to the format for recording the response. As I already said, since here we have not $x$ and $y$, but other values, we use a non-standard notation of the form:

Solving complex systems of equations

As a final note to today's video tutorial, let's look at a couple of really complex systems. Their complexity will consist in the fact that they will have variables on both the left and right. Therefore, to solve them we will have to apply preprocessing.

System No. 1

\[\left\( \begin(align)& 3\left(2x-y \right)+5=-2\left(x+3y ​​\right)+4 \\& 6\left(y+1 \right )-1=5\left(2x-1 \right)+8 \\\end(align) \right.\]

Each equation carries a certain complexity. Therefore, let's treat each expression as with a regular linear construction.

In total, we get the final system, which is equivalent to the original one:

\[\left\( \begin(align)& 8x+3y=-1 \\& -10x+6y=-2 \\\end(align) \right.\]

Let's look at the coefficients of $y$: $3$ fits into $6$ twice, so let's multiply the first equation by $2$:

\[\left\( \begin(align)& 16x+6y=-2 \\& -10+6y=-2 \\\end(align) \right.\]

The coefficients of $y$ are now equal, so we subtract the second from the first equation: $$

Now let's find $y$:

Answer: $\left(0;-\frac(1)(3) \right)$

System No. 2

\[\left\( \begin(align)& 4\left(a-3b \right)-2a=3\left(b+4 \right)-11 \\& -3\left(b-2a \right )-12=2\left(a-5 \right)+b \\\end(align) \right.\]

Let's transform the first expression:

Let's deal with the second one:

\[-3\left(b-2a \right)-12=2\left(a-5 \right)+b\]

\[-3b+6a-12=2a-10+b\]

\[-3b+6a-2a-b=-10+12\]

In total, our initial system will take the following form:

\[\left\( \begin(align)& 2a-15b=1 \\& 4a-4b=2 \\\end(align) \right.\]

Looking at the coefficients of $a$, we see that the first equation needs to be multiplied by $2$:

\[\left\( \begin(align)& 4a-30b=2 \\& 4a-4b=2 \\\end(align) \right.\]

Subtract the second from the first construction:

Now let's find $a$:

Answer: $\left(a=\frac(1)(2);b=0 \right)$.

That's it. I hope this video tutorial will help you understand this difficult topic, namely solving systems of simple linear equations. There will be many more lessons on this topic: we will look at more complex examples, where there will be more variables, and the equations themselves will already be nonlinear. See you again!

A system of linear equations with two unknowns is two or more linear equations for which it is necessary to find all of them general solutions. We will consider systems of two linear equations in two unknowns. General view a system of two linear equations with two unknowns is presented in the figure below:

( a1*x + b1*y = c1,
( a2*x + b2*y = c2

Here x and y are unknown variables, a1, a2, b1, b2, c1, c2 are some real numbers. A solution to a system of two linear equations in two unknowns is a pair of numbers (x,y) such that if we substitute these numbers into the equations of the system, then each of the equations of the system turns into a true equality. There are several ways to solve a system of linear equations. Let's consider one of the ways to solve a system of linear equations, namely the addition method.

Algorithm for solving by addition method

An algorithm for solving a system of linear equations with two unknowns using the addition method.

1. If required, by means of equivalent transformations, equalize the coefficients of one of the unknown variables in both equations.

2. By adding or subtracting the resulting equations, obtain a linear equation with one unknown

3. Solve the resulting equation with one unknown and find one of the variables.

4. Substitute the resulting expression into any of the two equations of the system and solve this equation, thus obtaining the second variable.

5. Check the solution.

An example of a solution using the addition method

For greater clarity, let us solve the following system of linear equations with two unknowns using the addition method:

(3*x + 2*y = 10;
(5*x + 3*y = 12;

Since none of the variables have identical coefficients, we equalize the coefficients of the variable y. To do this, multiply the first equation by three, and the second equation by two.

(3*x+2*y=10 |*3
(5*x + 3*y = 12 |*2

We get the following system of equations:

(9*x+6*y = 30;
(10*x+6*y=24;

Now we subtract the first from the second equation. We present similar terms and solve the resulting linear equation.

10*x+6*y - (9*x+6*y) = 24-30; x=-6;

We substitute the resulting value into the first equation from our original system and solve the resulting equation.

(3*(-6) + 2*y =10;
(2*y=28; y =14;

The result is a pair of numbers x=6 and y=14. We are checking. Let's make a substitution.

(3*x + 2*y = 10;
(5*x + 3*y = 12;

{3*(-6) + 2*(14) = 10;
{5*(-6) + 3*(14) = 12;

{10 = 10;
{12=12;

As you can see, we got two correct equalities, therefore, we found the correct solution.

The use of equations is widespread in our lives. They are used in many calculations, construction of structures and even sports. Man used equations in ancient times, and since then their use has only increased. Only by deciding for yourself of varying complexity systems of equations, you will learn to quickly determine methods for solving any system. Sometimes it can be quite difficult to solve the system quadratic equations. However, the most commonly used method for solving these equations is the substitution/addition method.

Suppose we are given the following system of equations:

\[\left\(\begin(matrix) x^2-xy = 3, \\ y^2-xy = -2 \end(matrix)\right.\]

Let's add the equations of the system:

\[\left\(\begin(matrix) x^2 - xy = 3, \\ x^2 - 2xy + y = 1. \end(matrix)\right.\]

Let's solve the resulting system:

\[\left\(\begin(matrix) x(x -y) = 3, \\ (x - y)^2= 1; \end(matrix)\right.\]

\[(x - y) = -1 \] or \[(x - y) = 1\] - we obtain from equation 2

Let's substitute 1 or -1 into 1:

\ or \

Since we now know the value of one unknown, we can find the second:

\[-3 - y= -1\] or \

\ or \

Answer: \[(-3; -2); (3; 4)\]

If you need to solve a system of 2 degrees and 1 linear, then you can express 1 of the variables from the linear and substitute this equation into the quadratic one.

Where can I solve a system of quadratic equations online with a calculator?

You can solve the system of equations online on our website https://site. The free online solver will allow you to solve online equations of any complexity in a matter of seconds. All you need to do is simply enter your data into the solver. You can also watch video instructions and learn how to solve the equation on our website. And if you still have questions, you can ask them in our VKontakte group http://vk.com/pocketteacher. Join our group, we are always happy to help you.

Let us analyze two types of solutions to systems of equations:

1. Solving the system using the substitution method.
2. Solving the system by term-by-term addition (subtraction) of the system equations.

In order to solve the system of equations by substitution method you need to follow a simple algorithm:
1. Express. From any equation we express one variable.
2. Substitute. We substitute the resulting value into another equation instead of the expressed variable.
3. Solve the resulting equation with one variable. We find a solution to the system.

To decide system by term-by-term addition (subtraction) method need to:
1. Select a variable for which we will make identical coefficients.
2. We add or subtract equations, resulting in an equation with one variable.
3. Solve the resulting linear equation. We find a solution to the system.

The solution to the system is the intersection points of the function graphs.

Let us consider in detail the solution of systems using examples.

Example #1:

Let's solve by substitution method

Solving a system of equations using the substitution method

2x+5y=1 (1 equation)
x-10y=3 (2nd equation)

1. Express
It can be seen that in the second equation there is a variable x with a coefficient of 1, which means that it is easiest to express the variable x from the second equation.
x=3+10y

2.After we have expressed it, we substitute 3+10y into the first equation instead of the variable x.
2(3+10y)+5y=1

3. Solve the resulting equation with one variable.
2(3+10y)+5y=1 (open the brackets)
6+20y+5y=1
25y=1-6
25y=-5 |: (25)
y=-5:25
y=-0.2

The solution to the equation system is the intersection points of the graphs, therefore we need to find x and y, because the intersection point consists of x and y. Let's find x, in the first point where we expressed it, we substitute y there.
x=3+10y
x=3+10*(-0.2)=1

It is customary to write points in the first place we write the variable x, and in the second place the variable y.
Answer: (1; -0.2)

Example #2:

Let's solve using the term-by-term addition (subtraction) method.

Solving a system of equations using the addition method

3x-2y=1 (1 equation)
2x-3y=-10 (2nd equation)

1. We choose a variable, let’s say we choose x. In the first equation, the variable x has a coefficient of 3, in the second - 2. We need to make the coefficients the same, for this we have the right to multiply the equations or divide by any number. We multiply the first equation by 2, and the second by 3 and get a total coefficient of 6.

3x-2y=1 |*2
6x-4y=2

2x-3y=-10 |*3
6x-9y=-30

2. Subtract the second from the first equation to get rid of the variable x. Solve the linear equation.
__6x-4y=2

5y=32 | :5
y=6.4

3. Find x. We substitute the found y into any of the equations, let’s say into the first equation.
3x-2y=1
3x-2*6.4=1
3x-12.8=1
3x=1+12.8
3x=13.8 |:3
x=4.6

The intersection point will be x=4.6; y=6.4
Answer: (4.6; 6.4)

Do you want to prepare for exams for free? Tutor online for free. No joke.

Using this math program You can solve a system of two linear equations in two variables using the substitution method and the addition method.

The program not only gives the answer to the problem, but also gives detailed solution with explanations of the solution steps in two ways: the substitution method and the addition method.

This program may be useful for high school students secondary schools in preparation for tests and exams, when testing knowledge before the Unified State Exam, for parents to control the solution of many problems in mathematics and algebra. Or maybe it’s too expensive for you to hire a tutor or buy new textbooks? Or do you just want to get it done as quickly as possible? homework in mathematics or algebra? In this case, you can also use our programs with detailed solutions.

This way you can conduct your own training and/or training of yours. younger brothers or sisters, while the level of education in the field of problems being solved increases.

Rules for entering equations

Any Latin letter can act as a variable.
For example: \(x, y, z, a, b, c, o, p, q\), etc.

When entering equations you can use parentheses. In this case, the equations are first simplified. The equations after simplifications must be linear, i.e. of the form ax+by+c=0 with the accuracy of the order of elements.
For example: 6x+1 = 5(x+y)+2

In equations, you can use not only whole numbers, but also fractions in the form of decimals and ordinary fractions.

Rules for entering decimal fractions.
Integer and fractional parts in decimals can be separated by either a dot or a comma.
For example: 2.1n + 3.5m = 55

Rules for entering ordinary fractions.
Only a whole number can act as the numerator, denominator and integer part of a fraction.
The denominator cannot be negative.
When entering a numerical fraction, the numerator is separated from the denominator by a division sign: /
Whole part separated from the fraction by an ampersand: &

Examples.
-1&2/3y + 5/3x = 55
2.1p + 55 = -2/7(3.5p - 2&1/8q)

Solve system of equations

It was discovered that some scripts necessary to solve this problem were not loaded, and the program may not work.
You may have AdBlock enabled.
In this case, disable it and refresh the page.

JavaScript is disabled in your browser.
For the solution to appear, you need to enable JavaScript.
Here are instructions on how to enable JavaScript in your browser.

Because There are a lot of people willing to solve the problem, your request has been queued.
In a few seconds the solution will appear below.
Please wait sec...

If you noticed an error in the solution, then you can write about this in the Feedback Form.
Don't forget indicate which task you decide what enter in the fields.

Our games, puzzles, emulators:

A little theory.

Solving systems of linear equations. Substitution method

The sequence of actions when solving a system of linear equations using the substitution method:
1) express one variable from some equation of the system in terms of another;
2) substitute the resulting expression into another equation of the system instead of this variable;

$$ \left\( \begin(array)(l) 3x+y=7 \\ -5x+2y=3 \end(array) \right. $$

Let's express y in terms of x from the first equation: y = 7-3x. Substituting the expression 7-3x into the second equation instead of y, we obtain the system:
$$ \left\( \begin(array)(l) y = 7-3x \\ -5x+2(7-3x)=3 \end(array) \right. $$

It is easy to show that the first and second systems have the same solutions. In the second system, the second equation contains only one variable. Let's solve this equation:
$$ -5x+2(7-3x)=3 \Rightarrow -5x+14-6x=3 \Rightarrow -11x=-11 \Rightarrow x=1 $$

Substituting 1 instead of x into the equality y=7-3x, we find the corresponding value of y:
$$ y=7-3 \cdot 1 \Rightarrow y=4 $$

Pair (1;4) - solution of the system

Systems of equations in two variables that have the same solutions are called equivalent. Systems that do not have solutions are also considered equivalent.

Solving systems of linear equations by addition

Let's consider another way to solve systems of linear equations - the addition method. When solving systems in this way, as well as when solving by substitution, we move from this system to another, equivalent system, in which one of the equations contains only one variable.

The sequence of actions when solving a system of linear equations using the addition method:
1) multiply the equations of the system term by term, selecting factors so that the coefficients of one of the variables become opposite numbers;
2) add the left and right sides of the system equations term by term;
3) solve the resulting equation with one variable;
4) find the corresponding value of the second variable.

Example. Let's solve the system of equations:
$$ \left\( \begin(array)(l) 2x+3y=-5 \\ x-3y=38 \end(array) \right. $$

In the equations of this system, the coefficients of y are opposite numbers. Adding the left and right sides of the equations term by term, we obtain an equation with one variable 3x=33. Let's replace one of the equations of the system, for example the first one, with the equation 3x=33. Let's get the system
$$ \left\( \begin(array)(l) 3x=33 \\ x-3y=38 \end(array) \right. $$

From the equation 3x=33 we find that x=11. Substituting this x value into the equation \(x-3y=38\) we get an equation with the variable y: \(11-3y=38\). Let's solve this equation:
\(-3y=27 \Rightarrow y=-9 \)

Thus, we found the solution to the system of equations by addition: \(x=11; y=-9\) or \((11;-9)\)

Taking advantage of the fact that in the equations of the system the coefficients of y are opposite numbers, we reduced its solution to the solution of an equivalent system (by summing both sides of each of the equations of the original system), in which one of the equations contains only one variable.

Books (textbooks) Abstracts of the Unified State Examination and the Unified State Examination tests online Games, puzzles Plotting graphs of functions Spelling dictionary of the Russian language Dictionary of youth slang Catalog of Russian schools Catalog of secondary educational institutions of Russia Catalog of Russian universities List of tasks