Paracord weaving: weaving patterns for bracelets, lanyards and belts. How to tie a square lanyard for a folding knife

Not many people in our world are familiar with the concept of a lanyard. Many have seen this interesting decoration, but generally know nothing about its types and functions. But lovers of edged weapons often use a lanyard in their everyday life; moreover, many of them know how to weave this accessory themselves.

Lanyard - original look weaving, which is used to decorate the handles of various weapons - pocket and hunting knives, checkers, sabers, as well as tools. Weaving is done with a leather cord or synthetic cable, which is also called paracord.

The history of this interesting device goes back several centuries.. And if now the lanyard often serves only a decorative function, then initially it served to prevent the weapon from being lost and slipping out of the hand. This term was first mentioned during the times of chivalry, that is, in the 14th–15th centuries. In the Russian army this accessory was a mandatory part military uniform, as well as an insignia on an award weapon. The presence of a lanyard on a weapon spoke of the soldier’s special services to the fatherland.

Types and functions

The lanyard, although it is a simple loop of cable and looks like an ordinary modern keychain, makes it much easier to carry a weapon and work with hand tools. Depending on its “responsibilities”, this woven bracelet comes in two main types:

with a loop that is put on the hand - this option is more functional;
with cord or tail - more suitable for decoration and ease of use.

Both types of this accessory are successfully used in our time to achieve the following goals:

the ability to visually lengthen the handle of a weapon or tool;
the ability to quickly free your hand without losing the tool;
protecting your hand from cuts when it slips onto the blade;
distribution of the load on the hand during work or impact.
comfort when fastening, quick access to the knife in your pocket.

Along with this list, the main purpose of a lanyard is ease of use of a weapon or tool, because this factor can be the key to a successful battle and quality work done.

Weaving tools

Weaving a lanyard for a knife is not difficult even for a novice craftsman. This is a simple and fun activity that does not require special skills or serious expenses.

To create a lanyard with your own hands, you will need:

When all the materials and tools are at hand, you can look for suitable patterns for weaving a paracord lanyard.

Most often, the weaving pattern is alternate knitting of straight and simple knots. The result of combining these knots are such fashionable patterns today as cobra, ball, square, snake, diamond.

Manufacturing instructions

It is better for a beginner to become familiar with lanyard weaving using the easiest technique of a simple knot as an example. So, in order to make a lanyard for a knife, you need:

Having mastered the most basic technique, you can proceed to a more complex craft and weave a lanyard from paracord in two colors:

take 2 cords different colors approximately 25 cm long each. Tie the ends of the cords together so that the accessory is bright and clearly visible;
fold the cord in half, put on a carabiner and use it to measure the length of the future keychain;
after folding in half, two free ends of the cord are formed next to the carabiner. One of the cords (for example, blue) needs to be braided with the rest. To do this, place the blue cord under the bottom and then put it on top, forming a loop;
The free end of a cord of a different color (for example, yellow) is inserted into this loop. Tie a knot, thereby securing the carabiner clasp;
The keychain turns the other way. Using tweezers, the yellow cord is pulled through the finished blue loop. This stage is repeated until the length of the key fob reaches the required mark. The two-color lanyard is ready to use!

Mounting methods

Before you start creating this unique accessory, you need to think about methods for attaching the lanyard to a knife or other tool.

For example, you can attach the decoration to the handle through a special hole. This is the simplest and most reliable fastening option.

It is also possible to mount it through a ring or shackle; this method is compact, movable and allows you to quickly find pocket weapon to the touch. You can attach the lanyard using different techniques: with a knot or a clip, a loop or a special clip. Each method is good in its own way and depends on the tastes and wishes of the owner. The main thing in this matter is to secure the accessory in such a way as to ensure maximum comfort and safety for the future owner.

Some things have justified their existence over many centuries, remaining useful and meaningful in a rapidly changing world. One of these things was the lanyard, which for a long time has performed both decorative and practical functions. Lanyard- this is a lace, loop or belt, with the help of which a bladed weapon was held more securely in the hand and on the belt. First mentions lanyard(which in some European countries called a sword belt) date back to the XIV-XV centuries, the time of chivalry.

Lanyard attached to the pommel of the handle, and in some cases, to the guard of a weapon or tool. The lanyard is used to achieve a number of practical purposes, which include:

Preventing the loss of weapons. In case of an emergency, you can quickly free your hands by sharply releasing the knife from them, without fear of losing the weapon;
When stabbing, the lanyard will help prevent your hand from slipping onto the blade. A lanyard in the form of a loop, draped over the hand, acts as a limiter like a guard;
When working with a knife or tool for a long time, for example when chopping, lanyard unloads the hand;
You can hang the knife next to you using the lanyard loop;
The lanyard, made in the form of a cord, serves as a flexible extension of the handle. With its help you can deliver sharp blows;
By pulling the lanyard, the knife can be quickly removed from the sheath located on the boot, pocket or case;
When making swing movements with a large amplitude, the knife due to lanyard(a lanyard is considered in the form of a cord) receives additional inertia. This makes working with the knife more predictable and convenient;
A lanyard will help you quickly change your grip in battle. You can perform a sharp twist of the knife around the wrist, while changing the direct grip to the reverse one (and vice versa). This method of changing the grip is reliable and convenient, since the knife is difficult to knock out of your hands. In addition, this method is suitable for the cold season, when hands are less obedient due to the cold, or gloves;
Bright cord lanyard will help you quickly detect a knife that has fallen out of your hands.

In addition to its practical purpose, the lanyard has symbolic meaning, and also serves as a decorative element when wearing edged weapons (especially historically significant ones). Many award weapons used to always come complete with lanyard, made from a short-lived medal ribbon. When making your own lanyard, it is best to use a nylon cord. Firstly, it is easy and simple to purchase at any hardware store. Secondly, the nylon cord is wear-resistant and does not rot. And, thirdly, it is strong enough; it is necessary to apply a force of 70-80 kg to break such a cord. Besides lanyard from a nylon cord, if necessary, you can unravel it and get the cord in its original form. With which you can: repair clothes and equipment, tie up brushwood and firewood, use it as fastening material, use it in the form of a tourniquet, etc.
Quite popular is the lanyard known as " scaffold assembly" It is a self-tightening loop. Weaving it is quite simple, as well as unweaving it back. " hangman's noose“It also beats other types of weaving because it allows you to adjust the width of the loop.

Brief instructions for weaving such a lanyard.

Wind one end tightly

They call it a lanyard special kind weaving, which is made with cord and is used to decorate handles of various kinds. To this day, they are used to decorate weapons of any kind, especially if they are edged weapons. In simple words, lanyard - a loop of cable or rope located at the end of a saber or other weapon. In the Russian army, the presence of such a lanyard on a soldier spoke of his special services to the fatherland and showed that this was a badge of honor. Even novice needlewomen can weave a lanyard!

Lanyards were used for convenience and as decoration for the knife, attached to its handle. All objects that riders used before had lanyards at their ends. Therefore, the initial function of weaving a lanyard is considered to be convenience for the person who uses this or that thing.

The secondary function is beauty. It was made as decoration. When the gun owner had free time, he could construct with his own hands all kinds of lanyards from various materials. Knowing the patterns and methods of weaving a lanyard, for example, from leather, the craftsman could advantageously decorate his bladed weapon.

Knowing some patterns and types of weaving knots, a person is able to profitably and without problems make a decoration in the form of a lanyard, even for a checker. Let's look at some of them.

Learning the technique of weaving a lanyard with an analysis of the main types

Simple knot.

It’s not for nothing that the node is called that way. Therefore, almost everyone, at least once in their life, resorted to using it. It is performed by first knitting a knot upward, and then inward to the first knot.

Straight knot.

When connecting the ends in a simple knot weaving pattern, do it twice for both sides.

Simple and straight knots, adjacent to the weaving technology, so it is not surprising that people who know how to perform the first know the basics of the second.

It is fashionable to perform lanyards in the following ways:

Snake
Hunting knot
Cobra
Square weave
Round weaving - ball
Diamond weave.

In this article, you will see how to make a paracord lanyard using the technique of weaving a simple knot.

Since paracord is one of the optimal materials for weaving a lanyard, we will use it in practice.

You will need:

Paracord or strong cord.

Yes, only this material will be needed to complete the craft. Start making the lanyard by weaving a simple paracord knot.

Step-by-step master class on how to make crafts:

Find the middle of the rope.
Make a loop on this section of paracord.
Thread the end of the rope through the loop. A simple node is ready.
Thus, perform simple knots according to the required quantity for you.
Attach to the desired weapon through the hole on the handle.
Check the ease of holding this structure.

If you are satisfied with everything, then the craft is ready. We will be glad if this master class turns out to be useful for you.

The lanyard allows you to visually lengthen the handle, even with a short knife to deliver chopping blows. This ability was convincingly demonstrated by participants in the rope cutting competition. This device can make the handle longer, even replace it. Using a lanyard, you can move and extend the accessibility zone of the knife beyond its contour.

The lanyard can not only protect the tool from falling out, but also free your hand, while at the same time allowing you to maintain quick access to the knife. This mount is especially convenient when working at heights, in a boat, in hard-to-reach places and during manipulations that require frequently putting the knife down and quickly picking it up.

However, it should be noted that each specific lanyard cannot perform all functions at once. Most often, it is intended only to perform one specific task.

There are different methods for attaching lanyards. It is attached to the handle, hilt, through a hole in the handle itself, or through a ring, bow - swivel. Each method has its positive and negative aspects. For example, fastening through a ring is more compact and movable, but fastening through a hole is simpler and more reliable; fastening through a shackle, especially if it moves tightly along the axis, allows you to stably orient the lanyard and quickly find it by touch. You can attach the lanyard freely, with a knot, with a clip, on a loop, or secure it with a through clip or a winding of thin wire. In short, everyone chooses the method of fastening according to their taste and needs.

Lanyards are knitted from a wide variety of materials, from decorative cord to chains and birch bark, but it is believed that the best material is leather.

Therefore, when making crafts and choosing material for them, be careful and study its characteristics. After all, working with weapons is not only fascinating, but also fraught with danger.

Video on this topic of the article

Lanyard- this is usually a cord, tassel or loop on the handle of a long-bladed weapon, but for decorative and utilitarian purposes, lanyards are also knitted onto knives. More often - folding ones.

The lanyard can be made separately, in which case it must have a loop long enough to thread through the hole in the handle and then insert the lanyard itself into the loop. As an option, for knives with a ring, you can make a lanyard in the form of a braided cylinder or a strip with a snap hook.

Square weaving

And we will consider another option, which I prefer. It is intended for those who wish to independently equip their knife with a braided cord.

First you need to have a suitable knife. The photos show Benchmade Ambush, it will be better visible later.

Then you need to have a suitable lace. There is no point in knitting something like this with leather, it is rigid. Let's take paracord, or, in the absence of it, shoe lace. In this case, the laces are not shoelaces, but similar. Slightly flat. Each one is 40-50 centimeters long.

We continue to weave a square

Only one of the laces should be threaded through the hole in the handle of the penknife. Then the second one is placed on it, and the first one is bent - each of the ends. Next, the most primitive knot of four ends is sequentially knitted; how to do this is shown in the very first illustration.

Knits and knits. Changing the direction gives a square weave, as in my illustrations, it is the densest. If you knit in one direction, we get something like a cylinder, this can also be interesting.

But it’s better to knit a cylinder serpentine knot, I used it to complete the work, and it will also be in the pictures - further in the text.

Tightened square

We knit until there is enough rope. If the rope is long, then until the length of the lanyard reaches the desired size. You can always unravel the excess, but a tightened lace loses its original shape and it’s better not to do that. Since the lanyard is knitted disposable, it can only be cut off and not removed (well, unless you untie the whole thing), then stock up on the cord and train on the cord or lace that is worse.

You should finish weaving when there are about twelve centimeters of lace left - this is if you want to knit something similar to the thing shown in the photo.

The next knot is trickier, and even now I automatically knit it with some difficulty. It's easy to make a mistake here. In addition, uneven tightening will ruin the design. But since there are only two or three knots, tightening flaws will not be so noticeable.

Node to complete work

This knot should begin to be knitted in the same direction as the outermost square one. After tightening all four ends evenly, gently pull them away from the knife. The point of the knot is to ensure that the laces do not stick out to the sides at the end of the work.

As I said, you only need a few snake knots, but you can generally tie the entire lanyard out of them. But keep in mind that subsequently such a cylinder may unwind along its axis and the design will not be very beautiful. It’s better to make a square or a spiral of squares (a spiral will work if you don’t change the direction as you knit the squares).

If you are satisfied with the length of the product, tighten the loose ends further so that the knot squeezes them tightly and they do not come undone, even when undone.

Blue and yellow

Now the lanyard is ready.

Something needs to be done with the loose ends of the laces. I did it simply. I tied the shortest lace as far from the lanyard as possible. The others are a little longer. The knots are the simplest, but eight would have been better (not long enough).

Alternatively, you can cut the laces and cauterize them. Can be tied and cauterized. The main thing is to prevent the lanyard itself from becoming fluffy, and how you achieve this is not important.

The color combination perfectly matches the black finish of the aluminum handle Ambusha. If the knife were gray or shiny, we would have to choose the appropriate colors :) The same khaki, black, dark green, perhaps even white. Light gray or variegated to gray will also work well.

Sealing the ends of the cord

The sixth picture clearly shows how the ends of the cord are sealed. In this case, two laces - blue and yellow - were the same length. If one of the cords is much shorter than the other, you can finish the job by tying a cylinder of the same color around two short cords.

Can be hung on laces turtles, beads, shark teeth, and so on and so forth.

Skulls, however, are difficult to obtain. And there are plenty of laces on every corner. Leather You can simply tie the laces to the knife and not knit anything with them. I cut them from an old belt.

Benchmade Ambush plain

The final picture gives an idea of the size of the lanyard made. Of course, if you are aware of the size of Ambush. Ambush still the same. The blade is ten centimeters, the handle is even larger.

I’ll write more about Ambush, but for now a few words about the benefits of lanyards.

The benefit is doubtful, but aesthetic the component is strong.

Such a bright lanyard is very useful for a black knife - and in this case the knife is heavy and will easily slip out of your pocket (I carry it in my vest pocket, and not on my pants pocket). The knife is flat and will go into a jacket pocket, but the lanyard will get in the way there. It gets in the way even in your pocket, but for some it will help them get a knife.

A special aspect of using lanyards is that they help to hold the knife when gripping it koi That's why the lanyard is made thick. However, I am not keen on saber cutting :)

A lanyard is a special type of weaving that is made with a cord and is used to decorate various types of handles. To this day, they are used to decorate weapons of any kind, especially if they are edged weapons. In simple words, a lanyard is a loop of cable or rope located at the end of a saber or other weapon. In the Russian army, the presence of such a lanyard on a soldier spoke of his special services to the fatherland and showed that this was a badge of honor. Even novice needlewomen can weave a lanyard!

The secondary function is beauty. It was made as decoration. When the owner of the weapon had free time, he could construct with his own hands all kinds of lanyards from various materials. Knowing the patterns and methods of weaving a lanyard, for example, from leather, the craftsman could advantageously decorate his bladed weapon.

Knowing some patterns and types of weaving knots, a person is able to profitably and without problems make a decoration in the form of a lanyard, even for a checker. Let's look at some of them.

Learning the technique of weaving a lanyard with an analysis of the main types

Simple knot.

Straight knot.

When connecting the ends in a simple knot weaving pattern, do it twice for both sides.

Simple and straight knots, adjacent to the weaving technology, so it is not surprising that people who know how to perform the first know the basics of the second.

It is fashionable to perform lanyards in the following ways:

Snake
Hunting knot
Cobra
Square weave
Round weaving - ball
Diamond weave.

In this article, you will see how to make a paracord lanyard using the technique of weaving a simple knot.

Since paracord is one of the optimal materials for weaving a lanyard, we will use it in practice.

You will need:

Paracord or strong cord.

Yes, only this material will be needed to complete the craft. Start making the lanyard by weaving a simple paracord knot.

Step-by-step master class on how to make crafts:

Find the middle of the rope.
Make a loop on this section of paracord.
Thread the end of the rope through the loop. A simple node is ready.
Thus, perform simple knots according to the required quantity for you.
Attach to the desired weapon through the hole on the handle.
Check the ease of holding this structure.

If you are satisfied with everything, then the craft is ready. We will be glad if this master class turns out to be useful for you.

However, it should be noted that each specific lanyard cannot perform all functions at once. Most often, it is intended only to perform one specific task.

There are different methods for attaching lanyards. It is attached to the handle, hilt, through a hole in the handle itself, or through a ring, bow - swivel. Each method has its positive and negative sides. For example, fastening through a ring is more compact and movable, but fastening through a hole is simpler and more reliable; fastening through a shackle, especially if it moves tightly along the axis, allows you to stably orient the lanyard and quickly find it by touch. You can attach the lanyard freely, with a knot, with a clip, on a loop, or secure it with a through clip or a winding of thin wire. In short, everyone chooses the method of fastening according to their taste and needs.

Lanyards are knitted from a wide variety of materials, from decorative cord to chains and birch bark, but it is believed that the best material is leather.

Therefore, when making crafts and choosing material for them, be careful and study its characteristics. After all, working with weapons is not only fascinating, but also fraught with danger.