Coloring red rabbit fur in home conditions. How to dye fur at home

Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During operation, the fur can change its original appearance, burn out in the sun, or maybe you’ll come up with the idea of changing the appearance of an old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.

Preparatory activities

The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration of the dye and, accordingly, affects the result of dyeing.

To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a rich cream, such as baby cream, to the inner layer (the bottom layer of the skin). Then, armed with a brush with stiff bristles, you should apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

What to paint with?

If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer enough professional paints and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at affordable price, and the variety of shades allows you to satisfy taste preferences every fashionista.

So, for dyeing you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable means of protection. When choosing a brush, give preference to one with stiff bristles.

Arctic fox fur

How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?

Deciding on the shade

If you don't know how to paint real fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

Let's start painting

To get maximum results, wet the arctic fox fur with water, then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural shade possible, and will last much longer than budget analogues. But some people recommend using spray paints. In this case, paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use general rules, working with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.

Mouton fur

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.

Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: test before painting small quantity pigment on a small area of a fur product - if stains and bald spots appear, it is better to abandon the idea of dyeing it yourself and entrust it to professionals.

Faux fur

Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.

The same hair dye is suitable for coloring - in the case of faux fur, you can experiment and give preference to brighter, acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

Let's sum it up

We tried to figure out how to dye fur at home, and listed several of the most effective ways. With the proper approach to the procedure, using high-quality materials and tools, you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.

It happens that your favorite fur product (hat, fur coat, collar, jacket) begins to lose its attractiveness, fades, becomes covered with ugly stains, and sheds. Or you want to “update” the same fur coat, giving it a more saturated shade that is relevant for the new season. If you don't want to throw away a piece of clothing and don't have the means to buy something new, you can try redying it to extend its life. So how can you dye fur at home without ruining the item? Simple enough!

We prepare the product for painting

If your fur coat from arctic fox, mink, or beaver is quite old, it is better not to waste time “updating” it, because the fur may not withstand painting. And you can experiment with a relatively new fur coat and hat. But first, prepare your item of clothing for painting by thoroughly cleaning it before this procedure, because dirty, stained pile may not be dyed properly.

In water heated to 36 - 38 degrees, dissolve 20 grams of table salt, a couple of grams baking soda and a twenty percent ammonia solution, adding a little shampoo. This amount of ingredients is enough for one liter.

The skins must be soaked in this solution for one hour. Then they need to be pulled out, squeezed out and rinsed. For the fur killing process, a solution of 500 grams of slaked lime, 250 grams of vitriol (iron) and 150 grams of alum diluted with 10 liters of water is also used. Apply this mixture to your fur coat or hat with a brush. When the fur is dry, rinse it in clean water.

How to dye fur: basic rules

If you still decide to update your fur product, find out how to dye fur at home with hair dye.

Choose a dye that is darker than the original shade, then small defects and imperfections in the skin will not be visible. Just remember that after about eight to nine months, the hair dye will begin to peel off, and the coloring process will have to be repeated.

Things that are white or beige color work well in different colors: both bright red and brown. And brown fur can be changed with dark chestnut or black dyes. To avoid accidentally ruining the product, first apply paint to the edge of the fur garment.

How to choose a mink coat. What to pay attention to? Determine the correct size of gloves. Read how to do this in this article. So that they look perfect on the handle.

It is better to paint the product in a large plastic tank; lightly wet the fur before painting. Wear rubber gloves to rub the paint more thoroughly. When your collar or hat is completely stained, rinse it in water and add a little vinegar. Stretch the skin on a flat wooden board, secure with pins and dry. To make the product shine, after drying, treat it with balm for colored hair.

White Arctic fox coats often turn yellow. Spray paint for suede will help remove this defect. It is necessary to spray the dye from a can at a distance of 70-100 meters from the fur coat. Apply the dye to the damaged ends, comb the fur coat with a brush so that the hairs do not stick together.

You can dye things made from natural and faux fur so easily and quickly at home.

Do you have clothes made of fur, but you are tired of them, you don’t like them, the fur is worn out and faded? Don't rush to throw it away! It can serve you for another year. You just need to update the product a little. How? Read below.

Where to dye fur?

This may be the first time you've heard, but fur can be dyed, even after it has been worn for many years.

This can be done either in a special salon or dry cleaner, or independently, at home.

How to dye fur at home?

First of all, inspect the fur and the inner side (the so-called underside). If the first one looks dirty, and the second one is hard and dry, then the product must be washed before dyeing.

To do this, rub fatty sour cream or kefir into the flesh with a cotton swab (repeat the procedure several times). As a result, it should become soft and elastic.

Wash the fur with shampoo for oily hair or laundry soap. It is not recommended to vigorously rub the fur so as not to damage it.

Dying fur at home is easy if you follow the technology. If you plan to remake or alter the product, then it is better to unstitch it in advance.

Most often, fur is dyed in dark colors (black or brown), as they ideally hide unevenness of the coat, coloring, defects and blemishes.

In addition, it is advisable to repaint the fur a tone darker than the natural color. However, if you want to do something exclusive or unusual, then a lighter tone or tinting is allowed.

Mouton products can be dyed brown and black. From astrakhan to black. Brown, blue and gray mink fur can be given the same, but more intense shade.

Pastel, beige, pearl tones of fur are ideally dyed in brown.

The furs of red, black-brown, silver-black foxes and arctic foxes are perfectly dyed into gray, red and blue. Fur dyeing should be done in a deep plastic container.

Of course, you have a question: how to dye fur?

Dyeing fur at home is a fairly simple procedure. This is where your own hair coloring skills will come in handy.

You will be surprised: to dye a fur product you can use an ordinary thing - hair dye. It is better to purchase several packages, as one may not be enough.

Before starting the procedure for applying hair dye, it is recommended to lightly wet the fur with water so that the dye can be easily distributed (it is prepared according to the instructions).

The paint must be applied quickly. It is convenient to work with gloves: this way you can thoroughly rub the paint. The duration of dyeing depends on the desired shade (usually indicated in the instructions).

At the end of the dyeing time, the fur should be rinsed in water with vinegar added, and then blotted with a towel.

The fur needs to be dried in natural conditions; it must first be stretched on a hard surface with the nap facing up and secured with pins.

It’s quite easy to renew fox fur with a saturated (dark brown) solution of potassium permanganate, which is convenient to apply with a sponge; there is no need to wet the fur. As a result, the fur will acquire a rich, bright red color.

More

During prolonged wear, a fur product may lose its attractiveness only because the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways of restoration. Specialized enterprises that provide dry cleaning and painting services know how to do this efficiently. But you can give a “second life” to your favorite thing at home. By following the instructions and applying some of your own imagination, you will be able to create a unique work of art.

If the age of a fur product is indicated by its color, then you can update the appearance by painting.

For gray astrakhan, only black or brown is used. Mink is dyed in its native colors in order to restore faded shades. Black or brown pigment is suitable for mouton products. Fur items in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for the job.

The main condition for high-quality and uniform coloring is. The best remedy An alkaline solution proved to be suitable for cleaning; its composition is as follows:

soda (dessert spoon);
salt (dessert spoon);
ammonia (teaspoon);
about 15 drops of detergent
1 liter of water.

Lightening yellowed white fur is an additional element of color restoration. To do this, use a solution with hydrogen peroxide (a teaspoon) and ammonia (10 drops). This product can remove yellowness from the fur of a silver fox. When processing with this composition, deep soaking should be avoided. First, make a test on an inconspicuous area of the product. 15 minutes is enough for lightening. We must remember that a longer process will make the ends brittle.

Remove yellowness from fur gray rabbit Chalk and starch help for a while. The powder is rubbed evenly and with little effort over the top of the pile and shaken off. This method will not harm the product, so it can be used often. Gray rabbit fur is dyed with hair pigment. There is also an absolutely safe method in which an aqueous solution of bluing is carefully applied with a brush to the entire surface of the product. The composition should be light blue.

To enhance faded raccoon fur, use hair dye with a lightening effect, as a result of which the product will look gold-plated or silver-plated.

You can renew fox fur with thick potassium permanganate. Treat it carefully with a sponge, not allowing things to get wet.

The faded ends of the fur are painted with suede spray paint. Spray the product slowly, keeping a distance of about 70 centimeters between the fur coat and the sprayer.

How to dye fur with hair dye?

For coloring Arctic fox or mink on our own hair dyes are suitable. This method has been tested in practice and always gives positive results when painting not too old things. It is better to first test the effect of even high-quality products on a small, inconspicuous area of the product.

To dye fur at home, you will need to follow these steps:

Straightening the strands of natural fur, apply a thin layer of fatty cream or glycerin to the flesh.
Gently moisturize the entire fur surface.
Apply the product as carefully as when coloring your hair.
Leave it for a while. Duration of dyeing - according to the instructions on the packaging with the dye.
To enhance the effect of the paint, apply a saline solution evenly over the entire surface.
Wash off the paint under the flow of water from the shower.
Remove excess with rags or blotting paper.

After drying, the fur is combed, observing the natural direction of the pile. This dye lasts on a fur item for up to six months, and this is often enough to make the item look renewed.

A simplified option for saturating the tone is painting with a tinting shampoo (according to the instructions on the package).

Homemade stencils are used for painting with multi-colored paints. The spots are painted one at a time.

Faux fur is easier to dye. You can use tinting shampoo and hair dye. The sequence of actions is as follows:

Before dyeing begins, the product is fixed.
Apply the product in the direction of the fibers.
Leave the paint to soak in. The time must match the instructions in the instructions.
After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with coloring new things.

Home or professional dyeing extends the life of a fur product for a short time. After some time, the pigment comes off and the item becomes faded again.

Arctic fox fur is one of the most popular today. It is beautiful, comfortable and warm, and belongs to the long-haired type of fur. It is often used to make wonderful fur coats, hats, even bags, and is used as accessories to complement designer clothing items. There are two types of arctic fox in nature: the rare blue and white, but fashion designers often use various dyes to give fur products the most unusual shades. And how to dye arctic fox fur at home, so that later you can decorate outerwear with a luxurious collar or simply update old thing? It's not that difficult.

How to prepare arctic fox fur for dyeing

Before starting dyeing, it is necessary to clean the fur so that in the future the dyes penetrate well into the hair structure. Most often, fur is cleaned using an alkaline solution, which effectively removes dirt. Take the following ingredients:

3 teaspoons salt;
2 teaspoons baking soda;
1 spoon of ammonia;
1 spoon of any detergent (you can use washing powder).

All ingredients must be dissolved in a liter of water. The solution is applied to the product with a brush. After cleaning, the fur is washed with water and dried naturally. To add shine, treat the product with a swab or sponge soaked in vinegar. To prevent the flesh from drying out, you need to smear it with baby cream or cosmetic Vaseline in advance.

How to choose a mink coat. What should you pay attention to?
We dye fur at home. How to do this, read this article.
How to Clean White Fur
If you decide to dye a fur product white, try to first carefully clean it of grease stains and remove yellowness. A solution of a teaspoon of ammonia, three tablespoons of regular ammonia will remove stains. rock salt, dissolved in a liter of water.
A mixture of talc and hydrogen peroxide can successfully combat yellowness. Apply it to your hair. And when the fur is dry, shake it gently. You can also try cleaning white fur with starch or semolina.
How to paint a product made from arctic fox
So, the desired fur product has dried. Now you need to find out how the paint will behave. Apply paint to a small area of the fur product, see how well it is colored, and whether any hair is coming out. You can take the usual dye that is used to dye human hair.
Are you wondering how to dye arctic fox fur at home blue or pink? Please note that light colors will be easiest to paint white arctic fox. But dark shades can also be pre-lightened by treating the fur with hydrogen peroxide. It is better to dye collars and hats in darker colors.
Before painting, wet the fur with water, then quickly paint the product with a brush, wearing rubber gloves. The paint needs to be left on for as long as indicated in the instructions. It is recommended to take extra paints, not one, but two packages. Once you are sure that your hair is sufficiently colored, rinse off the dye under the shower head.
Last stage: drying. Fur product you need to stretch it on a wooden plank with the fur facing up and secure it with pins. To dry the item faster, you can use a hairdryer (only the air should be warm). As soon as the flesh has dried, you can continue working with the dyed fur.