Mains voltage stabilizer teplocom st 555 characteristics. Voltage stabilizer for boiler

The voltage stabilizer Teplokom ST - 555 with a power of 555 VA is designed for effective adjustment of the power supply to wall-mounted and floor-standing boilers intended for the heating system. Installation of the wall mount for the stabilizer is carried out using three-point fasteners. The performance indicators, reliability and ease of installation of TEPLOCOM ST-555 turn out to be very high.

The principle of operation of the device is based on the fact that when an increase or decrease in voltage is detected electrical network perform an emergency load shutdown. The power circuit is opened due to the operation of a microprocessor protection relay. The relay type of devices is very common in Russia. Originality of the solution network connection makes it possible to install the device on site without special costs.

Functions of the Teplocom ST-555 stabilizer:

  • Simple and convenient connection
  • Safe plastic housing
  • Miniature sizes
  • Surge protection
  • Fast protection in case of network failure
  • Lightning protection
  • High overload power

Stabilizers are made from high quality materials. The reliability and durability of the device is ensured not only by the quality of the product itself, but also by compliance with the operating conditions:

  • The frequency of the current in the network should be 50±1Hz
  • Air temperature – from +5 to +40°С
  • Humidity – up to 95% at t + 25°C.

Technical characteristics of Teplocom ST-555:

  • Declared total power, no more than 430 W
  • Dimensions, no more than 128*170*85 mm
  • Weight no more than 1.8 kg

The main thing is to correctly determine the size of the load connected to the device. Namely, to know what the maximum power of the electric boiler connected to the heating system is. Taking into account the recommended margin of 20%, the rated power of the stabilizer will be 400 VA. In this case, the maximum consumed load can be equal to 555 VA. This peak flow is only possible for no more than 1/4 hour.

Thus, the heating system to which the boiler is connected always receives a safe, permissible voltage, and is able to operate reliably, regardless of the instability of the input signal.

Conclusion

Modern electric boilers can instantly respond to voltage changes in the network. The Teplocom ST-555 device is designed to provide highest level protection for yours and give you peace of mind.

Voltage stabilizers are designed to compensate for voltage surges that can occur in the network and damage sensitive electrical equipment. When developing stabilizers, Teplocom takes into account both the characteristics of Russian electrical networks and the requirements of high-quality equipment.

Features of ST-555 stabilizers
— Voltage stabilizer for power supply of heating systems based on wall-mounted and floor-standing boilers.
— Power 555 VA.
— Safe plastic case.
— Microprocessor control.
— Voltage range: 145-260 V.
— Miniature, compact size.
— Protective automatic shutdown in case of a network failure.
— Protection against voltage surges.
— Lightning protection.
— Large overload capacity.
— Relay type stabilization.
— Does not introduce distortions into the sinusoid shape.
— Three-point wall mounting.

Stabilization

Physical characteristics and functionality

Dimensions and weight

Dimensions, WxHxD: 130x170x85 mm
Weight: 1.8 kg
Delivery of goods is carried out throughout Russia. When delivering in Moscow and the Moscow region, we deliver the order within the time agreed with the buyer within three days from the moment of its confirmation. The day and time of receipt of the goods are discussed with the manager when placing an order.

The most popular model from the Teplokom series - stabilizers for gas heating boilers. Stabilizer Teplocom ST-555 designed to provide reliable, stable power supply to the heating boiler. This model is specially designed for wall installation next to a wall-mounted gas heating boiler. When developing this stabilizer, all the requirements of modern energy-dependent gas heating boilers for power supply parameters were taken into account. "Teplokom 555" is a reliable stabilizer for all types of gas heating boilers, proven by time and operating experience of tens of thousands of users.

Appearance of the voltage stabilizer Teplocom ST-555 (Teplocom ST-555)

Features of the voltage stabilizer Teplocom ST-555 (Teplocom ST-555)

Analogous to “China XXX-1000”. Insured by Ingosstrakh for RUB 3,000,000. Recommended by the world's leading manufacturers for wall-mounted boilers. Leader in the heating equipment market

The voltage stabilizer for gas heating boilers provides reliable power supply for floor- and wall-mounted gas boilers. An original solution for network connection and simple circuit installation allows you to install a gas boiler stabilizer on site without unnecessary costs. Stabilizers for gas boilers of the Teplokom series have a modern design, equipped with LED backlighting and indication of operating modes.

  • Load power "Teplokom 555" - 555 VA
  • Very simple connection of the device (installation is no more complicated than an extension cord)
  • "Teplokom 555" has a safe, elegant plastic case.
  • Miniature dimensions make it easy to find a place for installation
  • "Teplokom 555" has a protective automatic shutdown in case of a network failure
  • Teplocom stabilizers are designed taking into account European power supply standards
  • "Teplokom 555" is capable of providing greater overload power
  • "Teplokom 555" is compatible with gas boilers heating of various types

Factory warranty for the Teplocom ST-555 voltage stabilizer is 5 YEARS!

New case design from a professional industrial design studio

Anyone can handle connecting a stabilizer!

Soft LED backlight for Teplocom ST-555 stabilizer

Teplocom ST-555 has a simple and reliable three-point wall mounting

High quality voltage stabilizers of the Teplokom series

The high quality of voltage stabilizers for gas heating boilers of the Teplokom series is ensured by the manufacturer’s effective quality control system. The quality control system includes mandatory testing of each device in a specialized factory laboratory. Stabilizers for gas boilers of the Teplokom series comply with all the requirements of GOST of the Russian Federation and the unified requirements of the Customs Union; Teplokom stabilizers for gas heating boilers are manufactured in accordance with international product safety requirements. The integrated quality management system at the plant complies with the requirements of the ISO 9001 quality standard, this makes it possible to effectively carry out quality control at all stages of the development and production of stabilizers for gas boilers. Voltage stabilizers for gas heating boilers are manufactured in accordance with the requirements international standard environmental management ISO 14001 and OHSAS 18001 standard

Voltage stabilizers for gas boilers have undergone multi-level quality control and full testing in foreign laboratories of well-known global manufacturers of gas equipment. The companies Bosch, Baxi, Termet, Thermona, Sime, Buderus, Alphatherm, Vaillant, Gazeco, Chaffoteaux, Junkers recommend the use of voltage stabilizers for gas boilers of the Teplokom series

The most popular model from the Teplokom series - stabilizers for gas heating boilers. Stabilizer Teplocom ST-555 designed to provide reliable, stable power supply to the heating boiler. This model is specially designed for wall installation next to a wall-mounted gas heating boiler. When developing this stabilizer, all the requirements of modern energy-dependent gas heating boilers for power supply parameters were taken into account. "Teplokom 555" is a reliable stabilizer for all types of gas heating boilers, proven by time and operating experience of tens of thousands of users.

Appearance of the voltage stabilizer Teplocom ST-555 (Teplocom ST-555)

Features of the voltage stabilizer Teplocom ST-555 (Teplocom ST-555)

Analogous to “China XXX-1000”. Insured by Ingosstrakh for RUB 3,000,000. Recommended by the world's leading manufacturers for wall-mounted boilers. Leader in the heating equipment market

The voltage stabilizer for gas heating boilers provides reliable power supply for floor- and wall-mounted gas boilers. An original network connection solution and a simple installation diagram allow you to install a gas boiler stabilizer on site without unnecessary costs. Stabilizers for gas boilers of the Teplokom series have a modern design, equipped with LED backlighting and indication of operating modes.

  • Load power "Teplokom 555" - 555 VA
  • Very simple connection of the device (installation is no more complicated than an extension cord)
  • "Teplokom 555" has a safe, elegant plastic case.
  • Miniature dimensions make it easy to find a place for installation
  • "Teplokom 555" has a protective automatic shutdown in case of a network failure
  • Teplocom stabilizers are designed taking into account European power supply standards
  • "Teplokom 555" is capable of providing greater overload power
  • "Teplokom 555" is compatible with gas heating boilers of various types

Factory warranty for the Teplocom ST-555 voltage stabilizer is 5 YEARS!

New case design from a professional industrial design studio

Anyone can handle connecting a stabilizer!

Soft LED backlight for Teplocom ST-555 stabilizer

Teplocom ST-555 has a simple and reliable three-point wall mounting

High quality voltage stabilizers of the Teplokom series

The high quality of voltage stabilizers for gas heating boilers of the Teplokom series is ensured by the manufacturer’s effective quality control system. The quality control system includes mandatory testing of each device in a specialized factory laboratory. Stabilizers for gas boilers of the Teplokom series comply with all the requirements of GOST of the Russian Federation and the unified requirements of the Customs Union; Teplokom stabilizers for gas heating boilers are manufactured in accordance with international product safety requirements. The integrated quality management system at the plant complies with the requirements of the ISO 9001 quality standard, this makes it possible to effectively carry out quality control at all stages of the development and production of stabilizers for gas boilers. Voltage stabilizers for gas heating boilers are manufactured in accordance with the requirements of the international environmental management standard ISO 14001 and the OHSAS 18001 standard

Voltage stabilizers for gas boilers have undergone multi-level quality control and full testing in foreign laboratories of well-known global manufacturers of gas equipment. The companies Bosch, Baxi, Termet, Thermona, Sime, Buderus, Alphatherm, Vaillant, Gazeco, Chaffoteaux, Junkers recommend the use of voltage stabilizers for gas boilers of the Teplokom series






Description SKAT TEPLOCOM ST – 555

SKAT TEPLOCOM ST – Voltage stabilizer for a gas boiler. Load power 555 VA, network range 145...260 V, full power over the entire network range, voltage stabilization of booster type, microprocessor control, protective shutdown in case of network failures with automatic recovery, indication emergency situations. Small-sized plastic wall-mounted housing. Quick and easy connection (no more complicated than an extension cord). Analogous to “China XXX-1000”. 5 year warranty. Insured by Ingosstrakh for RUB 3,000,000. Recommended by the world's leading manufacturers for wall-mounted boilers. Leader in the heating equipment market. Provides indication of the presence of input and output voltage, checking the correct phasing when connecting to the network and the presence of potential on the ground, an alarm in case of blown input fuse, indication of the input voltage level (within normal limits/outside normal limits).



The mains voltage stabilizer "TEPLOCOM ST-555" is designed to stabilize the mains voltage in order to improve the quality of power supply. The stabilizer is designed for heating systems and can be installed at facilities for various purposes: cottages, apartments, offices, industrial enterprises, institutions, etc.

Mains voltage stabilizer for power supply of heating systems based on wall-mounted and floor-standing boilers. An original network connection solution allows installation of stabilizers on site without unnecessary costs.

Purpose of the Teplocom ST-555 stabilizer

  • Power 555 VA
  • Simple and quick connection (no more complicated than an extension cord)
  • Safe plastic housing. Miniature dimensions
  • Surge protection
  • Protective automatic shutdown in case of a network failure
  • Lightning protection
  • Designed to meet European electrical regulations
  • Large overload capacity
  • Advanced display
  • 5 year warranty

  • New case design from a professional industrial design studio

  • Anyone can handle connecting a stabilizer!

  • Soft LED backlight for Teplocom ST-555 stabilizer

  • Teplocom ST-555 has a simple and reliable three-point wall mounting

  • Branded packaging itself will tell the buyer everything about the Teplocom ST-555 stabilizer, without waiting for the help of a sales consultant

    TEPLOCOM ST-555 with additional display!

    Incorrect phasing or the presence of an induced potential between zero and ground can lead to incorrect operation of the boiler... The new TEPLOCOM ST-555 has an additional indication, which, when installing and configuring the heating boiler, will help identify some malfunctions. The modernization of the stabilizer did not affect the cost of the device; the retail price of TEPLOCOM ST-555 remained the same.

    Indicator display:

  • Input voltage is within normal limits or out of normal limits
  • Presence or absence of output voltage
  • Incorrect phasing indication
  • Indication of induced potential on the ground bus
  • Output fuse blown indication

    Technical characteristics of SKAT TEPLOCOM ST – 555

    • Unit: 1 piece
    • Dimensions (mm): 180x190x90
    • Weight (kg): 555.00
    • Rated load power, VA: 400
    • Maximum load power (no more than 15 minutes within 1 hour), VA, no more: 555
    • Input (mains) voltage, V: 145…260
    • Output voltage, V:: with input voltage 165-260 V: 200…240
    • at input voltage 145-165 V: more than 170
    • Load change limits, %: 0…100
    • Output voltage at which the protective load shutdown is triggered and the “OUTPUT” indicator goes out, V:
      less than 170±3
      more than 242±3
    • Input voltage at which the “NETWORK” indicator starts blinking, V:
      less than 165±5
      more than 260±5
    • Switching time, ms, no more: 20
    • Power consumed from the network, no load, VA, no more than: 3
    • Overall dimensions WxHxD, mm, no more:
      without packaging: 130x170x85
      with packaging: 180x190x90
    • Weight, kg, no more than NET (GROSS): 1.8 (2.0)