Scarecrow made from matches. Yards

Pugach- a simple invention that can make a loud sound. Often guys do these things in the yard to drive away dogs or just to laugh at someone. The design of the scarecrow is very simple, even a child can handle it school age.

How to make a scarecrow from a tube with your own hands?

For the scarecrow we need:

Tube (metal), size: length 10 cm, diameter - 3-4 cm;
- nail, 7-9 cm;
- a piece of a bicycle tube;
- foil.

Scheme of the scarecrow.

1. First of all, you need to bend the tube into an L-shape. Having measured 7 cm, bend it. You can use a hammer to flatten the end of the smaller piece.

2. Take the foil and stuff it tightly into the tube. Approximately 2cm. the pipe must be clogged.

3. Now we will bend the nail. We insert the nail into the tube, measure another 1 cm and bend it.

4. Crumble sulfur from 2-3 matches into a tube and compact it with a nail.

5. Leave the nail in the tube and insert the rubber band. It should be pulled between the curved edge of the nail and the tube.

That's it, our scarecrow is loaded and ready to shoot!

To activate it, throw it on the floor until it hits a nail, or simply press the rubber band.

VIDEO. How to make a scarecrow?

Difficulty level: Easy

1 step

1 Take the tube, measure 70 mm and bend it at an angle of 90 degrees (to get an L-shaped blank), short end Ivy using a hammer.

Step 2

2. We tightly hammer the foil (shot) into the tube, about 2 cm, i.e. There should be 5 cm of free hollow space left.

Step 3

3. Take a nail and measure the length by one cm longer hollow space (the nail will serve as a striker for the charge, piston method) and bend it at an angle of 90 degrees (L-shaped).

Step 4

4. Charge. We take 2-3 matches, crush the heads into the hole on the edge of the tube, and tamp them with our nail. We put the elastic on the short edge of the tube and the nail closer to the edge. We pull the nail so that it catches on the break with the tube (the elastic band will press it). Everything is ready.

Step 5

5. You can activate it by throwing the scarecrow onto the floor, hitting the surface with the head of a nail, or simply pressing the rubber band. It will be BANG! :-)

• Most importantly, follow safety precautions as with pyrotechnic devices: 1. Do not use near flammable objects. 2. Do not bring it close to people. 3. Keep minors away. 4. Do not exceed the charge of match heads. 5. Do not use other flammable substances (gunpowder, etc.) 6. Observe etiquette. Where and how and with whom to use it.

A match shooter from a clothespin was invented back in the days of the Soviet Union. The common people also called him “pugach”. Schoolboys gladly used this “weapon” in their battles. Due to the simplicity of the design and components that are always available, the crossbow was very popular among senior and senior students. junior classes. Everyone knew how to make a scarecrow. This device is compact, and you can shoot from it with both conventional and incendiary ammunition. It depends on individual desire. Although firing fire shells had more psychological impact, since it also caused physical harm. The effectiveness of such a charge is negligible. Now this weapon has lost its former popularity. To a certain extent, this was influenced by the fact that now clothespins are mostly made of plastic, and wooden ones have a very weak spring. Plus, kids these days are lazy and not particularly hardworking. But there are still true connoisseurs of this simple weapon who would like to know the process of its manufacture. For them, further on we will talk about how to make a scarecrow with your own hands. In the hope that they will pass on this secret to others, as a result of this it will not be lost.

Basis of the device

How to make a scarecrow from a clothespin - a children's weapon from the times of the Soviet Union? The answer to this question is quite simple. Some people still use wooden clothespins.

One of them can be taken as a basis in the manufacture of this throwing weapons, which can shoot lit matches like a real military weapon.

Available materials

In this case, the following is necessary:

1. Wooden clothespin.
2. Rubber.

Tools

Here you will need:

1. Penknife.
2. Safety glasses.

Ammunition

In this regard, you can use:

Manufacturing process

Now let's move directly to the question of how to make a homemade scarecrow.

To do this you need:

Disassemble the clothespin itself into three parts. Namely: two halves made of wood and a spring made of metal.

With help you need to finish both halves. It's not difficult to do this. To start, you just need to cut a small groove on one of the wooden halves. Take your time, your fingers are much more valuable than any clothespin. Then divide the other half into two parts.

Then the spring must be pulled back to the indicated groove. This must be done carefully. So that its protrusion fits into this very groove.

Then attach the short piece to the long one. To avoid mistakes when assembling, before making the scarecrow, be guided by the factory grooves. Once everything is in place, you need to fasten the elements with an elastic band. That's all. The clothespin scarecrow is ready.

Remember that when secured with an elastic band, these wooden pieces should still move apart a little. That is, so much so that the upper part makes it possible to cock the spring.

Checking for “combat readiness”

When asking how to make a scarecrow, you should take into account that this device must be ready to fire. That is, it is necessary to carry out verification. To do this you need to do the following:

1. Pull back top part forward. Until the protrusion of the spring is in the factory groove on its surface. When you achieve this, then pull this part back. Until the protrusion of the clothespin is in the groove you made at the bottom of the match shooter.
2. Then select a projectile and load it by lifting the top part of this device. In this case, regular matches or metal clips are ideal.
3. After this, pull back the spring so that the trigger bar is released. This will result in a shot. That is, the device works.

Cause of malfunction

It may also be that the match shooter will not fire. This may be because another part of the spring is slipping out of place. Then you will have to further deepen the groove into which it goes. This malfunction occurs because the depth of the groove is not the right size.

Modernization of the device

In the future, you can improve your scarecrow. To do this, you need to glue a fragment of a matchbox with sulfur on it to its lower part. It's not hard to do. After this upgrade, matches will light up when fired. This will add additional efficiency to this device. Also, part of the matchbox can be completely replaced with a piece of sandpaper. However, in this case you will have to insert the matches into the scarecrow backwards. It won't be very convenient. This problem is much easier to solve by lighting a match before firing. In this case, you should not neglect the danger posed by burning shells. Never use them indoors, do not shoot at flammable objects, and it is advisable to wear them while doing so. And of course, never aim at people or animals. The match shooter is capable of shooting at a distance of up to five meters, and sometimes even further.

Conclusion

Having read the above, everyone will be able to understand the question of how to make a scarecrow - a match shooter. What is needed only in this case is desire, scrupulousness and hard work.

Otherwise! We take out somewhere (you need to know the location) a thick brass tube with a diameter of 6-8 mm, a length of 10 cm. From one end we flatten the tube tightly with a hammer for 3-4 cm. We bend the flattened one almost 90 degrees. We get something like a pistol.

We place pieces of tin inside, heat the bend so that the tin melts and forms a strong plug 1 cm long there. Heat and cool with the barrel facing up.

We find a nail of a suitable diameter (it goes in and out easily), saw off its tip (do not grind the cut area!), insert it into the barrel and bend the rest of the nail almost 90 degrees. When assembled, such a scarecrow looks like the letter “P” with short legs spaced wider than the shoulders. We connect the legs with a ring of tight rubber...

We crush sulfur from 2-3 (no more) match heads into the trunk. We insert a nail and use it to grind the sulfur into powder.

Then we put an elastic band on the ends of the nail and tube - this is a non-working condition. To shoot, we push the nail out of the barrel by 3 cm. The rubber itself will rest it against the wall of the tube. This is already a combat state.

Let's keep the scarecrow at bay - thumb on the barrel, the rest - on an elastic band. As soon as you sharply press the rubber band against the barrel, the nail jumps into the tube, hits the sulfur and - AH! Rumble, rumble!

By the way, increasing the number of matches used does not increase the noise, but it can tear your scarecrow to hell. There - two or three fingers, one or two eyes, etc. etc. So - be careful!

Source I do not know this information. If you know the author of the article or are one yourself, please contact me through the "Contacts" page.

A few more articles from the "" section

Every grown man was once a child. And the greatest entertainment in those happy times of childhood was playing with friends in the yard. It doesn't matter what the game is, the main thing is to play. What did you play most often? Of course, there were skirmishes, war, partisans and much more - it’s impossible to list everything. And if there was an opportunity to shoot from something, then this was the ultimate dream of any boy! Slingshots, crossbows and other delights of the boys’ world simply excited the imagination. And if you blow something up all over the yard, then that’s the height of bliss! What if it is possible to shoot burning matches at a decent distance? It was, as they say now, “The Hit of the Season”! We will tell you about one of the types of boyish fun. It's called a scarecrow.

A scarecrow is a device that produces noise. The main purpose of its creation is to scare someone. In general, a scarecrow is considered to be a children's toy in the shape of a pistol, which, when used with caps, makes a loud popping sound. But there are also so-called “adult” scarecrows - blank cartridges, For example.

However, there are also many ways to make a scarecrow at home. What can this product be made from:

1. from a copper tube and a piece of plywood;
2. from clothespins;
3. from a metal tube;
4. from a bicycle spoke;
5. of two bolts and a nut;
6. from dowels, etc.

Show all

The clothespin scarecrow, or, as it is also called, “Matchshooter,” was invented a very long time ago, when it still existed Soviet Union. An entire era Children were amused by this type of “weapon” when they played war with friends in the yard. The design is so simple, and the materials for its manufacture were so accessible to everyone that only the lazy or those who had never heard anything about it made a scarecrow from a clothespin. Compactness, ease of use and reliability have made the device very popular. Another feature is that it could fire both regular and incendiary shells.

Nowadays, the clothespin scarecrow is no longer popular. One of the main reasons is that in Soviet times, clothespins were made of wood with a weak spring, but now they are made of plastic. Another important factor: now children have so much entertainment (the Internet, games, movies) that they are not even interested in doing something with their own hands. And with the development of the Internet and social networks You rarely see school-age children playing anything in the yard anymore.

However, there are still enthusiasts! It is for them that we wrote this article, in which we will tell you in detail how to make a scarecrow from a clothespin with your own hands. So let's get started.






Now let’s move on directly to the description of what needs to be done to create this miracle weapon.

First stage

Disassemble the clothespin into three parts - you should have two wooden bases and a spring.



Second stage

Using a penknife, you need to process both halves of the clothespin base, which is not at all difficult. First, cut out a gutter on one of the wooden bases. Take your time, otherwise you might cut your fingers! Then divide the other half into two parts.



Third stage

Now carefully pull the spring back towards the groove so that its protrusion fits exactly into the groove. Then you need to attach the short part to the long one. To avoid mistakes, you should focus on the factory chute. The final stage: when everything fits as it should, you need to fasten all the parts with an elastic band. Everything is ready! As you can see, making a scarecrow is not at all difficult!



The next thing we absolutely must do is test our creation. This is the most enjoyable stage, isn't it?

Checking the product

To do this, perform the following steps:

1. 1. Pull the upper part forward until the spring ends up with its protrusion in the factory groove. Once you have done this, you must pull this part back until the protrusion of the clothespin is in the groove that you made.
2. 2. Now you must select a projectile and load it. This is easy to do: slightly lift the top part. Matches or paper clips are best used as projectiles in this case.
3. 3. Then we pull back the spring until the trigger bar is released. After this there should be a shot. If so, hooray! You did everything right!

What to do if the device does not work?

The reason may be that the second part of the spring is not held in place. What needs to be done? It is necessary to deepen the groove in which the spring is held.

You won't believe it, but even such a simple device can be upgraded! Yes, yes, don't be surprised. Now we'll tell you how.

We glue a strip to the bottom of the scarecrow, which we cut out of a matchbox. We cut out a fragment where there is sulfur for lighting matches. As a result of this improvement, the match will light up at the moment of firing.

Safety precautions for use

Since the scarecrow's projectile can have a range of up to five meters, never use it at home or in other areas. You should also not aim at other people, children or animals. Also keep the crossbow away from flammable objects. It is highly advisable to wear goggles to protect your eyes when using burning projectiles; caution is a good idea. Happy using!