How to increase wifi speed on a laptop. Ways to increase Wi-Fi speed

How to increase Internet speed through a wifi router if providers promise users high Internet speed under any conditions and often this promise is not realized?

Internet speed is the amount of data transferred per second of time (measured in kilobits or megabits per second).

In browsers and other programs, the speed of uploading or downloading files is measured in kilobytes or megabytes per second. These two concepts should not be confused.

Possible reasons for low Internet speed

Internet speed may decrease due to the following reasons:

the device is too far from the router;
the network is simultaneously used by several devices that consume a large amount of traffic;
software problems in the router;

Before you start troubleshooting the problem, you should test the speed of the Internet using online services.

During testing, disable third-party browser tabs and programs that may interfere with the speed test. Some popular services:

Useful information:

Pay attention to the utility. It is a tool that increases the security of using the Internet. The operating principle of the program is based on encrypting DNS traffic between the user and the provider.

Updating router drivers

Updating all router drivers can help increase the speed. The installed driver may be incompatible with the operating system version.

Open Device Manager (a system utility that displays all connected devices) and select the Network Adapters tab.

Find your wifi adapter in the list and, by right-clicking, select the “update” menu item.

The drivers will be downloaded and installed in the background in one to two minutes.

Advice! After updating the drivers, be sure to restart your computer and router.

Changing the network operating mode

The router operating modes are responsible for its throughput on a specific device.

There are modes that can increase the speed of the router by improving the QoS level.

To change the operating mode, go to the device manager and right-click on the wifi adapter.

Select the properties item. The “advanced” tab lists all possible operating modes of the router through which you can increase its performance.

WiFi adapter

To ensure the fastest possible internet speed, select WMM, Preamble or Power Output mode.

Router firmware

If the above methods do not help increase Internet speed and the router periodically turns off spontaneously, you should reflash it.

Contact any service center that specializes in servicing wifi routers.

Installing the firmware yourself may cause problems with the device.

To find out which software version you need to update to, turn your device over and look at the current firmware version, as shown in the image:

For example, in the figure, the router software version is 7.2, which means it needs to be updated to version 7.

Other ways to increase internet speed

There are also other ways that will help increase the wifi speed on your personal computer or laptop.

Increasing channel width. You can change this parameter in the router settings window. The recommended channel width for an uninterrupted and fast Internet connection is 20 Megahertz. You can also increase the channel width;
Transmitter power control. This parameter is also set in the router settings. The recommended value is 75.

A video that will tell you how to apply all the above methods of increasing Internet speed in practice:

How to increase the speed of your WiFi router and Internet? Speed up wifi

The speed of a WiFi router is the main problem when creating a wireless network. We often hear from viewers that the router slows down the speed, which is why their Internet speed is low.

today they are not just popular: they are a must-have in every home and office. After all, users with them gain not only a stable connection to the World Wide Web. The main thing is that this connection should also be of high quality, and ideally super-fast!

But what if the provider provides a speed of 100 megabits per second, but via Wi-Fi it barely reaches 20-30 Mbit per second? It's time to start using these far from unnecessary megabits, and to do this you need to figure out how to quickly and accurately increase the speed of WiFi on modern and not so modern router models.

Improving Internet speed through the router's Wi-Fi network

For the simplest Internet surfing, scrolling through social networks, online stores and similar web portals, downloading a track or picture, even 3-5 megabits of device bandwidth is enough. In this case, there will be no difficulties with WiFi speed and its increase, because... the user does not feel any inconvenience. Pictures download, Facebook and Twitter open, what else do you need?

The problems become obvious when the user watches, for example, a video in good quality and sees that the speed of information transfer via Wi-Fi only reaches a minimum of 20-30 Mbit per second, while the tariff is designed for 100 Mbit or even more . How to increase the speed of wireless Internet through a Wi-Fi router in this case?

To begin with, it is worth clarifying 3 points:

Determine the capabilities of the device itself. Budget devices with basic configuration provide average internet speed. In inexpensive units, the manufacturer can save on the chipset (1 core, minimum frequency), amount of RAM, and antenna power. For home use and simple online work, this is quite enough. If you need to quickly download large files, play adventure games and shooting games, you should think about purchasing a more expensive device (for example,).
Look at the Wireless N label on the box. The numbers next to this inscription, for example 300, mean the maximum achievable Wi-Fi speed (if you use the latest 802.11N standard). If an older standard is used, then the indicators will be somewhere 1.5-2 times less than the specified number.
Update firmware. Before you try to increase Wi-Fi speed by manipulating the settings, you need to update the device firmware to the latest (it is also advisable to do this for). In addition, computer software compatibility can have a negative impact on speed. Therefore, it is worth visiting the web portal of the developer company, downloading the newest version from there, going to Windows Device Manager or adapter settings, and making changes to the firmware.

What else needs to be checked before setting up the unit? The number of gadgets connected to it. After all, the device has to “divide” the initial connection speed among everyone. To successfully solve this, you can use specialized ones that will help you set up a wireless virtual network without “jumps” in the pace of work.

Another simple method to increase the speed of Wi-Fi several times is to use an interval of 5 gigahertz. Some routers support 2 bands: 2.4 and 5 gigahertz. Most often, Wi-Fi networks are operated on the first of these frequencies. And it turns out that the more devices operate at 2.4 gigahertz, the worse the connection can be. Residents of apartment buildings should know this firsthand.

5 gigahertz is used less frequently, resulting in less interference and higher connection quality. A nuance - to operate the specified frequency, a mobile or stationary device must support it (a good example is).

After everything is checked, you can start digging into the settings.

Convert all gadgets to 802.11N

When working with the “ancient” standards 802.11G or 802.11B, the network’s ability to quickly transmit information is reduced by up to 80%, so it’s time to switch to a more current one.

The standard is launched very simply:

in the Internet browser you need to write the IP address of the gadget (indicated on the label);
enter your login and password (factory or personal);
go to the menu and select “Basic settings”;
go to “Wireless Mode” and select 802.11 N from the list.

Nuance: in devices from different manufacturers (for example, or), the settings may differ. More details can be found in the instructions for use, which are supplied with the unit.

You should not use WEP or WPA/TKIP, which have become a thing of history: they can significantly “slow down” the speed of the wireless Internet. Even if you switch to 802.11N, but do not change this parameter, you will not be able to increase the speed on any router model. Additionally, this standard provides a high degree of security by working in tandem with a block cipher algorithm called AES.

To change these parameters, you will need:

go to the device settings (how to do this is described above);
select “Advanced settings”;
go to the security section;
set: network authentication – WPA2-PSK, encryption – AES.

Click on the “Change” button at the bottom of the screen. The settings will take effect after the device is rebooted.

After 802.11N is connected, in order for the Internet to reach record speeds, you need to activate WMM. This parameter goes in tandem with QoS (quality of service) and is well suited, for example, for streaming video.

WMM is connected in the Wi-Fi settings. To do this you need:

go to “Wireless mode”;
click on “Advanced settings”;
Click on On next to WNN.

WNN is also required to support the PC wireless adapter. You can connect through: Settings – Properties – Advanced.

Setting the channel width to 20 MHz

802.11N technology works with broadband channels by default to increase network throughput. But it is worth considering that this will only be effective if the signal is excellent. Under standard Wi-Fi network conditions, this is almost impossible to achieve. In addition, 40 MHz channels operating at 2.4 gigahertz may cause interference with other gadgets that use this band.

And with a weak signal, a broadband channel has the opposite effect - the data transfer speed decreases and interference appears. In devices like this, the use of such channels is the default, so it’s worth changing this manually.

In the additional Wi-Fi settings, you need to set the value to 20MHz next to the “channel width” item. Then click on “Save” and reboot the device for the updated settings to take effect.

When manually setting up a wireless network, you need to select not the maximum value, but the optimal number. This can be done in the aggregate interface (for example: ):

setting up a wireless network;
signal strength;
gradually reduce the value.

You need to stop when, at the farthest point of the room/apartment/office, the laptop or smartphone stops “seeing” the network. After this, you need to increase the transmitter power by one division and you can use Wi-Fi at optimal settings.

The maximum power value will be set automatically, but if the device is located directly next to a PC or laptop, this may lead to losses or a weak signal. And an extra temptation for neighbors... And if the router settings do not provide for changing this value, it is worth increasing the distance between it and the gadgets that receive Internet from it.

Let's summarize: to increase the Wi-Fi speed on the router, you will need to set:

Options	Meaning
frequency range	2.4 or 5 GHz
wireless standard	802.11N
network authentication	WPA2-PSK
encryption	AES
MultiMedia (WMM)	on
channel width	20 MHz

After all the steps, it is important not to forget to restart the unit. The procedures described above will significantly speed up the speed of Internet work via Wi-Fi and will allow you to productively use the capabilities of both budget and more expensive devices.

With the introduction of wireless Internet technology, there is no longer a need to connect a bunch of wires to your devices to provide access to the network. A standard wired connection needs to be provided only for a router - a device that distributes IP addresses to client gadgets and covers Wi-Fi in a nearby, small area. However, sometimes it may turn out that even on a modern router the Wi-Fi connection is too slow, web pages load “monstrously” slowly, you have to wait several minutes for this or that site to open, and even when you are in immediate The situation is no better if you are close to the distribution router. If you connect to a hot spot on the street or in a cafe, there is nothing you can do about it, since you do not have access to a Wi-Fi distribution device. If you set up a network at home, you can probably do something about this problem. Today we will tell you how to increase Wi-Fi speed when organizing a network in an apartment, if the current state of affairs regarding Internet access speed does not suit you, we will offer several ways to solve the problem.

What explains the slow connection speed?

Regarding the reasons for low connection, there may be several of them:

— first of all, the low quality of the equipment used. If your router is more than 2-3 years old, most likely it will not be able to guarantee you the maximum speed of providing Internet access. As you know, new devices meet completely different speed standards, and your 10 Mbit/s is unlikely to satisfy anyone today. To find out the technical specifications of your router, refer to the device documentation available on the Internet on the official website of the manufacturer. The number of transmitting antennas that the router is equipped with is also important. For high-quality communication there must be at least 2 of them, and this will provide a larger signal coverage range;

— low signal transmission range. The transmission range of traffic has the same relationship to speed as the first point. The closer you are to the access point, the faster the speed will be, and vice versa. Buying a modern router model can also solve this problem in your favor;

- cheap tariff plan. This point is important only if you live far from large cities and your provider is not able to provide high network throughput. If your speed is at least 50 Mbit/s, then you don’t have to worry too much about this parameter;

— excessive loading of the operating system by third-party applications and penetration of malicious code. If your OS is overloaded when exchanging traffic with the server, this can be explained by excessive clutter of the system with third-party software. Remove programs you don't need through the application manager. Another likely reason is that a worm or botnet has landed on your hard drive and completely eats up your traffic. In this case, you have to take care of cleaning your PC from viruses, using one of the appropriate cleaning products (Avast or Dr.Web CureIt);

- damaged equipment. If the router accidentally falls on the floor or onto a hard surface, the device may be damaged and will need to be taken in for repairs. Damage to the distributing antenna is especially critical, since this type of breakdown has a direct impact on the quality of the transmitting signal;

- outdated firmware. Firmware is of no small importance in ensuring high speed Wi-Fi connections. Over time, developers fix major system errors and even completely change the firmware shell. So, if you haven’t updated, it’s time to think about it: the procedure is very simple and does not require any special skills or abilities.

How to increase the speed of Wi-Fi connection?

If you are rearranging your apartment, think about the range of signal distribution from the router. Try to install the device as close to the center of the apartment as possible so that the signal is distributed evenly to all rooms. It is worth taking into account the number of transmitting antennas on the gadget. If the router has only one antenna, you can still achieve high quality communication, after which you will need to buy a new router. It is also important to take into account the thickness of the walls.

The next rather significant nuance is to indicate the appropriate frequency of the router signal. As usual, all devices distributing a Wi-Fi signal operate on the same frequency, and in apartment buildings they simply interrupt each other’s signal. Under such circumstances, it is worth specifying the actual transmission channel number in the router settings, taking into account the network load. By default, all routers have the “Auto” parameter set.

How to increase Wi-Fi speed by specifying the actual channel number in the settings?

Log in by entering the appropriate host IP address of the router, and specifying the login and password on the pop-up form to enter the settings menu. In this manual, I will use the ASUS router control panel as an example; in your device, the sequence of actions may be slightly different.

Let's go to the settings menu in the "Wireless Network" section.

In the active category you can see the “Channel” option. Set one of the values of this key so that the signal does not constantly switch from one channel to another, as was the case when the “Auto” value was set.

If you have a router from D-Link, TP-Link or any other brand, you may have to wander through the settings a little to find the option to configure the communication channel here.

How to increase the speed of Wi-Fi connection by changing other parameters of the router?

To increase wireless throughput, you need to switch your network settings to the 802.11N standard. This is the fastest standard in the 2.4 MHz band, supported by all devices released since 2010 and later. Thus, in the basic parameters of the Wi-Fi connection, we force the N-mode to be set (or select the standard in the field: 802.11N).

Another important tip is to use the WPA2-PSK security standard with AES encryption. The WPA2 algorithm is the most modern and secure; it is available by default in all new routers. However, if you doubt that you are using this particular standard, it is better to check everything yourself. To do this, go to the wireless network security settings and set the encryption method to WPA2, and the algorithm to AES.

It is also worth enabling the WiFi Multimedia mode (or WMM, as it is called in the settings). This option is required if you want to get speeds above 54 Mbit/s. According to the QoS quality of service specification, setting this mode is also a prerequisite. You can set this mode in the advanced wireless network settings.

In addition to this, you need to activate this mode in the network adapter settings. Right-click on the network connection in the taskbar and select the “Network and Sharing Center” option from the menu.

A list of network adapters installed on your laptop/computer will appear. Select the adapter for Wi-Fi connection from the list, right-click on it and select the “Properties” option from the context list.

After this, already on the settings form, go to the “Advanced” tab, find the “WMM” option in the list of properties and set the value to “Enabled”.

The last tip related to setting up a router involves using a channel width of 20 MHz. By default, the width is differentiated, i.e. varies between 20 and 40 MHz. The 40 MHz broadband option is not very suitable for apartment buildings, since the signal there is not very strong and stable. So check the 20 MHz option and enjoy the result.

How to increase the speed of your Wi-Fi connection by playing with your computer settings?

If after all the manipulations with the router you find that the connection speed has not changed at all, perhaps the reason for the low connection is in the computer and not in the router. Let's look at the system load in the OS settings. To do this, go to the task manager using the combination Ctrl+Alt+Del. Let's use the second tab called "Performance".

If the diagram shows that the network is overloaded, and you are not currently downloading anything and are not using the Internet, go to the first tab containing a list of services running in the background, called “Processes” and disable here those programs that you do not currently need .

Another useful tip on how to increase Wi-Fi speed on a laptop is to disable unused applications from startup. To do this, use the Win+R combination, and in the mini-window that appears, enter the “msconfig” parameter. Go to the “Startup” tab, after which the list you need will open.

If this method does not work, we can recommend updating the W-Fi adapter drivers to the latest version. You can find the required package on the website of the laptop manufacturer, or through driver packs such as DriverPackSolution (just do not select the automatic mode, since in addition to the drivers, a bunch of browsers and other applications will be installed. Work through the expert mode).

In conclusion, we would like to suggest that you adjust the routing configuration on your PC. This can be done without any special effort and without any harm to the system. To reset the settings, run cmd mode as administrator. To do this, right-click on the start button and select the corresponding element in the context menu.

Next, in the prompt that appears, enter the request “route -f”. Don't be alarmed if your web connection goes down briefly. After that, enter the key query “ipconfig /renew” and press Enter again. If the above commands did not help, instead of the second specified key, use the “netsh winsock reset catalog” command.

Results

If you want to know how to increase the speed of your Wi-Fi connection, we hope that our article will help you achieve success in your task. Otherwise, it's time to think about buying a new router, with at least two antennas and higher speed characteristics. Thanks to support for new communication and data transfer standards, the new device can increase Wi-Fi speed by at least 2 times. To know this for sure, you need to study the technical parameters of the old and new devices and compare them.

When buying a wireless router, we usually try to buy the fastest and most powerful device for the money available. Having read the words Wireless 300 on the box, the user expects hurricane speeds, but in reality they get low speeds. Then the ordeal begins between the service center and the provider’s technical support, who begin to blame each other. And the reasons usually lie in the WiFi settings due to which the router slows down the speed. And this is not a matter of a mistake, no. It’s just that the entire setup of a wireless network usually comes down to setting a password for the connection; all other parameters remain at default. And despite the fact that they are optimal in principle, in some cases more fine-tuning is required to increase WiFi speed. It will not take much time and does not require high technical qualifications. Here are 7 simple steps.

1.Updating the router firmware

Often (especially on newly launched models), router software has flaws or errors that lead to unstable operation of the device, including problems with WiFi speed. This is why troubleshooting needs to start with its flashing.

Download the latest firmware version from the manufacturer’s official website and install it on the router. There is a special menu for this in the web interface.

2. Forcefully enable 802.11n

Today's fastest wireless communication standard used in the standard 2.4 GHz band is 802.11N, theoretically allowing speeds of up to 150 Mb/s when using a single antenna and up to 300 Mb/s when using 2 antennas in MIMO mode. Therefore, the first thing to do to increase WiFi speed is to activate this standard. This is done in the general wireless network settings section:

On most router models this parameter is called “Mode”. If the list contains the option “Only 11N”, then select it. True, I’ll make a reservation right away: if you have an old laptop or an antediluvian phone that only works on 802.11G, then it will not see this network. In this case, you need to select the “802.11 B/G/N Mixed” option.

3. Change the channel width

If after changing the mode you still experience low Wi-Fi speed through the router, then try changing the channel width from 20 MHz to 40 MHz.

This is one of the common reasons why a router slows down.

4. Turn on Wi-Fi Multimedia

Almost all modern routers operating in the Wireless N300 standard support WMM or WME wireless multimedia extension technology, which provides quality of service (QOS) functions, thereby improving the quality of work and reducing the number of wireless network errors. Typically this feature is found in the advanced options:

Check the “Activate WMM” box, save the settings and reboot the device.

5. Use WPA2

Very often, the reason for the low speed of a Wi-Fi router is the incorrect choice of network security mode. The fact is that routers often have the default “WPA/WPA2-PSK” universal option, which allows two standards to work simultaneously. The whole point here lies in the fact that outdated WPA does not support speeds above 54 Mbps, that is, it begins to slow down the entire network. Therefore, to increase Internet speed via WiFi, use only the WPA2-PSK version:

6. Select a free radio channel

In apartment buildings in large cities, routers are installed in almost every apartment. This cannot but affect the quality of communication due to the fact that there are few channels available for use and wireless networks begin to interfere with each other, creating interference. That is why, if your Wi-Fi speed has dropped sharply, and the network starts to work slowly and slows down, then try playing with the channels in the router settings:

Try putting the channels on the outermost ones in order. As a rule, they do it last.

7. Update your adapter driver

Another common reason for low Wi-Fi speed is a “crooked” wireless network adapter driver. Most often, when installing, the user uses either the driver that comes included on the disk, or one that is automatically installed by the Windows operating system. As life shows, this is often not the most successful version.

Another article on this popular topic. Probably everyone who checked the connection speed through their Wi-Fi network was interested in why it is so low, why the router slows down the speed, and how to increase the speed of the Internet connection. I have already answered almost all these questions in the article: . And in this article we will talk about how to increase Internet speed over a Wi-Fi network. And as far as possible.

The whole problem is that when connecting the cable (from the Internet provider, or even from the router) directly to the computer, we usually get a speed of 80-100 Mbit/s (if you have a 100 Mbit/s tariff), but when connecting via Wi-Fi, it depends. Maybe even 20 Mbps, or even less. If your router is not the cheapest, then the speed will be approximately 50-60 Mbit/s. But, it all depends on the specific case. And in general, the speed that a router provides over a wireless network depends not only on the router itself. There are many different factors, which I will write about later in this article.

Separately, I would like to write a few words about the maximum speed of the wireless network, which is indicated on the box of your router, or in the specifications. Many people are interested in this question. 150 Mbit/s, 300 Mbit/s, this is the maximum theoretically possible speed that the router can produce. Of course, under normal conditions such speeds will never be achieved. And this is normal, it does not mean that you have a bad router.

Why is the Internet speed slower over Wi-Fi?

I think you will agree that a wireless connection is not as stable as a wired one. And no matter how it is, a cable connection has always been and will be the most stable and reliable.

Directly, when you connect the Internet cable directly to the computer, there is a direct connection to the provider’s equipment. When we install the router, it already manages this connection. The router controls the flow, distributes the Internet to other devices, etc. This is precisely why the speed drops when connecting through a router. And especially when connected via Wi-Fi network.

How much a router will cut speed mainly depends on the power of that router. The more powerful the router, the faster it can process information, and it has a higher maximum speed flow. And the more powerful the router, the more expensive it is. And believe me, there is a difference between a device for 20 dollars and 200. Otherwise, there would simply be no expensive routers. No one would buy them or make them.

We found out why the router slows down the speed, and now we’ll take a closer look at some of the ways you can increase the speed over a Wi-Fi network. At least you can try.

Before doing anything, it would be good to connect the Internet directly to the computer and check the speed. You can check it on the website http://www.speedtest.net. There is a separate article on this topic that you can view.

If your tariff speed is, say, up to 20 Mbit/s, then you won’t be able to squeeze out any more. Therefore, we measure the speed with a direct connection, then over a Wi-Fi network. We will find out how slow our router is. And yet, you can check from different devices that you connect via Wi-Fi. Since the speed also depends on the device we connect.

1 Let's probably start with the most working method (in my opinion). Search for a free Wi-Fi network channel and replace it in the router settings. When your devices see many other Wi-Fi networks, all of these networks can interfere with your wireless network. And because of this, connection speed often suffers.

Therefore, you can try to determine the freest channel and set it in the settings of your router. There is a very detailed article on this topic:. It also shows how to change the channel in the settings of different routers. Here, for example on TP-LINK:

Here you need to experiment, try different options. And if you already have a static channel, then set it to Auto.

2 Wi-Fi 5 GHz. If you have a lot of neighboring networks and a lot of interference that affects the speed, then the best option is to switch to Wi-Fi 5 GHz. Buy a router that supports broadcasting a Wi-Fi network at a frequency of 5 GHz. The speed will definitely be higher there. I recently wrote about one such router: . But there is one caveat: not all devices.

New phones, tablets, laptops that are already going on sale, they most likely already have support for Wi-Fi networks at the new frequency. But older devices do not support it. This can be easily found out from the characteristics. But this is not a problem, since all dual-band routers broadcast a wireless network at a frequency of 2.4 GHz. So older clients will be able to connect to it.

Not only is the 5GHz network now almost completely free of interference, but also according to the 802.11ac standard, the speed is higher than 802.11n. If at a frequency of 2.4 GHz the maximum speed is 300 Mbps, then at 5 GHz it is already 433 Mbps (for Tp-Link Archer C20i).

3 Wireless adapter drivers. This method is only suitable for computers and laptops. As I wrote above, the speed also depends on the Wi-Fi receiver that is installed in your computer. In a wireless network, the speed is always matched to the slowest device. No matter how powerful your router is, if you have an old Wi-Fi adapter on your laptop that doesn’t even support 802.11n mode, then we won’t see any great speed.

Replacing a laptop's Wi-Fi adapter is of course problematic. But, you can try updating the driver for this adapter. Perhaps a new version has already been released with various improvements, and after the update we will get an increase in speed.

4 Set the 802.11n operating mode and channel width. If you do not have very old devices that do not support 802.11n, then you can try setting this operating mode in the router settings. As a rule, the default is automatic selection of the operating mode. For greater compatibility with different devices.

You can do this again in the settings of your router, which you can access according to the instructions. As a rule, these settings can always be found on the tab where the Wi-Fi network is configured. This settings item is usually called " Mode", or " Network mode". You need to select " 11n Only" (N Only), and save the settings. This is what it looks like on TP-LINK routers:

On the same page you can also change the channel width (Channel Width). You can try to put 40MHz.

Save the settings and reboot the router.

If after these settings you have problems connecting to Wi-Fi with some devices, then return everything back.

5 It is possible that your router settings have old WPA encryption method. Not only is it unsafe for protecting a wireless network in our time and is already very outdated, but it also tends to limit the speed.

You need to install WPA2-PSK encryption (you most likely already have it installed). You can set the correct security settings according to the instructions. Using D-Link, Tp-Link, ASUS as an example. And in the “Setting up a router” section on our website there are instructions for other devices.

6 The closer you are to the router, the stronger the signal and the higher the speed. Therefore, try to install the router like this (I will enter the location) so that there is a good signal throughout your home.

And if you have a large house and the router cannot penetrate the signal to distant rooms, then you can install. Or buy a more powerful router.

7 You can try again update router firmware. In new versions of the software, things are improved and finalized. Therefore, after the update, the speed on the Wi-Fi network may increase. We have instructions on our website for all popular manufacturers. I give a link to the instructions, and instructions.

8 Also, do not forget that the more devices are connected to the router, the lower the speed will be. Firstly, the router will simply divide the initial connection speed between all devices, and secondly, from the load that the devices will create on the router, it will reduce the speed even more.

Afterword

The best way to solve this problem is to buy a more powerful and expensive router. And even better, dual-band, so that you can use the Wi-Fi network at a frequency of 5 GHz and get good speed.

Well, if buying a new router is not part of your plans, then be sure to try the tips that I wrote about above. I think there will definitely be some result. Don't forget to share your results on increasing Wi-Fi speed in the comments.