ID codes for skyrim. Skyrim code for ability points

The Elder Scrolls 5: Skyrim has a lot of fans. It attracts with its graphics, entertaining gameplay, variety of races, and interesting quests. Perhaps one of the advantages of the game is the large map.
The number of locations in this game is dizzying, and avid gamers set themselves the goal of visiting each one. But here’s the problem: many places (altars, lairs, ruins, temples) simply do not appear on the map! Either the developers considered these locations too small to mark somewhere, or they decided to make the game a little more complicated in this way. True, the number of unmarked locations in Skyrim goes well beyond a hundred. So what should we do?

There is a way out!

Solving the problem is easier than it seems; you don’t even need to install any modifications. A special code will open access to a complete and detailed map. There is a small nuance here: after using it, it will no longer be possible to return the map to its previous appearance. However, those who have set a clear goal to explore every corner of the fictional world cannot do without a cheat.

How to activate?

Cheat codes are entered into a special console. To open it, you need to press the “tilde” [ ~ ] button.
Then you need to enter the following characters: tmm 1. This is the code to open the entire map in skyrim. It is the same as in the previous part, Oblivion. Then close the console. Voila!

What was not noted?

If you list out loud everything that is not on a regular map and is not expected, it will take more than one hour.

Here are just a few places that are unlikely to be found without a cheat code:

Ice Troll's Lair (on the way up the mountain near the second Hunting Camp);
Sword Hand (northeast of Coldwind Pool);
Mammoth in the Ice (north of Alftand);
House of Lucky Lorenz (in front of the waterfall, not far from the Abandoned Prison);
Column of Peryite (next to the sanctuary of the same name);
Headless Skeleton (if you go to Neugrad, along the way there is a tree with the previously mentioned skeleton);
Flag of the unknown hero (;
Indigestible Emerald (deer corpse with a gem in its stomach);
Unlucky Trader (a trading cart with a dead owner is located near the Divided Gorge);
Nordic ruins near Morthal;
Burnt house;
A house destroyed by a dragon in the wilderness;
Burnt caravan;
Hunting tragedy;
Fallen towers;
Temple of Akatosh.

The names of the above locations are very, very intriguing, and they themselves are extremely unusual and definitely worth a walk through them.

What if you're tired?

So, the code to open the entire map in Skyrim greatly simplifies the gameplay. Now absolutely all villages, cities, altars and other interesting places present in the virtual world are marked. However, you should think carefully before entering the coveted four characters: if you get tired of the cheat code, its effect can be canceled with the tmm 0 command, but even open locations will disappear. The effect, of course, is far from the most pleasant. Unfortunately, you won’t be able to use the “five minutes” cheat. And yet, this is a wonderful solution for those who do not want to spend many weeks, or even months, trying to find all the points on the map on their own.

The Elder Scrolls V: Skyrim is a role-playing game with a completely open world. The game was released back in 2011. Over the entire period of its existence, a huge number of cheat codes have already appeared on Skyrim, which add skills, money, dragon souls, ability points and much more. The passage becomes even more exciting. In this article we will present the most useful and interesting codes.

Activation of cheat codes The Elder Scrolls V: Skyrim

You need to do a couple of easy steps:
1) Open the console using the "~" key
2) Enter the desired command
3) Press Enter

Basic and additional codes:

♦ tcl– the ability to pass through walls
♦ tgm– complete stability
♦ tmm 1– all locations are open and available for movement
♦ psb- spells, dragon calls and talents are fully studied
♦killall- kills non-player characters near the hero
♦ qqq– exit the game
♦advlevel– level up without abilities
♦ tfc– moving camera
♦ tdetect– NPCs no longer react to theft
♦ tcai–AI turns off
♦ set timescale to 0- time freezing. By changing the number you can speed it up and slow it down
♦sexchange– the character’s gender changes
♦ showracemenu– hero creation window
♦ player.setlevel X– character level increases or decreases (1-255)
♦ player.setav invisibility 1– stealth mode is on
♦ player.setav invisibility 0– stealth mode is turned off
♦ player.setav speedmult X– character speed changes
♦ player.setscale X– change of hero’s height, (X-1=100%, etc.)
♦ setgs fJumpHeightMin 100– adjusts jump height
♦ player.setav Health X- change the number of lives
♦ player.setav Magicka X- change the amount of magic
♦ player.setav Stamina X– change in the amount of power reserve
♦ player.setav attackdamagemult X- change weapon damage
♦ player.setav leftweaponspeedmult X- change the attack speed of one-handed weapons
♦ player.setav weaponspeedmult X- change the attack speed of additional and two-handed weapons
♦ player.setav LeftitemCharge X– the main weapon is charging
♦ player.setav RightitemCharge X– additional weapon charge
♦ player.additem 0000000F X- adds gold coins
♦ player.additem 0000000A X– adds master keys
♦ player.placeatme 0010BF90– a spectral horse appears
♦ player.setcrimegold 0– the reward for killing your character is canceled
♦ player.addspell 00092C48- adding the skill “Lycanthropy”
♦ player.addspell 000B8780- adding the skill “Sanguinare Vampiris”
♦ player.moveto– move to non-player character
♦ coc qasmoke- move to the test location
♦ coc riverwood- move from the test location to any other
♦ player.setpos [coordinates] [number]- move character
♦ player.getpos [coordinates]– location of the character
♦ player.removeallitems– inventory is cleared

Actions with items and NPS:

♦prid- select an object by id
♦ stopcombat– stop a fight with a non-player character
♦ kill– kills the selected object
♦ resurrect 1– resurrection
♦ resetai– clears conversations with NPCs
♦ openactorcontainer 1– opens the inventory of any character
♦ removeallitems– clearing the inventory of the selected character
♦ equipment– adds an item to any hero
♦inv– selected character’s inventory
♦ duplicateallitems player– moving objects from a non-player character’s inventory to yours
♦ resetinventory– return of inventory contents
♦ setownership– obtaining rights of use for any object
♦ unlock– opening the lock
♦ disable– the selected item is hidden
♦enable– the selected item is displayed
♦ markfordelete– removing an object or non-player character

These were the basic commands. Let's move on to the most interesting part: leveling up skills

advskill X Y- gaining X skill Y experience

player.setav X Y- obtaining Y level of skill X

player.setlevel X- change character level

♦ Alchemy- alchemy
♦ Alteration- change
♦ Conjuration- sorcery
♦ Destruction- destruction
♦ Enchanting- enchantment
♦Illusion- illusion
♦Restoration- healing
♦ Marksman- shooting
♦Block- block
♦ Heavy Armor- heavy armor
♦ Light Armor- light armor
♦Lockpicking- opening
♦ One-handed- one-handed weapon
♦ Two-handed- two-handed weapon
♦Pickpocket- petty theft
♦ Smithing- blacksmithing
♦ Sneak- secrecy
♦ Speechcraft- oratory

These were the most necessary codes and commands, good luck!

Skyrim is a place for great opportunities. This is a large open world in which you can complete many quests, main and secondary, build a house and start a family, become the best magician, bard, thieves and assassin. You can kill dragons, trolls, draugr, falmer, werewolves and vampires. There are also many different mods for the game, which further expands the potential and capabilities of the game.

In addition, if you don’t want to deal with buying or making items yourself, searching for them, learning shouts or certain spells, then codes for “Skyrim 5” for magic will always come to your aid. They will allow you to get any necessary item, skill, level and solve various bugs that are often found in the game. It is worth noting that the use of magic codes in Skyrim can sometimes cause the game to malfunction, so you will have to start all over again. Thus, if you decide to make your in-game life a little easier, then it is best to make a backup save of your position in the game so that you can have peace of mind.

How to use codes?

In order to start entering codes for magic and other bonuses in Skyrim, you need to open the console. To do this, just press the tilde [~] key. The most common codes are the following:

tgm - makes the player completely invulnerable;
tcl - makes it possible to pass through walls;
tmm 1 - opens all locations on the world map;
killall - all characters, friends and enemies, die in sight;
psb - you immediately receive all the talents, dragon cries and spells that are available in the game;
qqq - quickly leave the game;
adlevel - allows you to increase the level, but you will not receive ability points;
tfc - switches to the “free” camera mode;
tdetect - all thefts will take place without consequences for the player, the NPC's vision will be disabled;
tcai - starts and turns off artificial intelligence. Using the code causes everyone to stop fighting;
SexChange - you can change the gender of the hero to the opposite one, but his face will not be changed. That's another result!
Showracemenu - opens a window for creating characters, in which you can adjust the race, gender, name and appearance of your character. In early versions of the game, if you made changes to a character's race, then his level dropped to level one. All previously acquired skills were also reset. Already from version 1.3.10.0 after such adjustments, the level and skills were the same. As we have already said, before using such code, it is best to save the game process.
player.setav invisibility - makes you invisible to all characters, both enemies and friends. If after the code you write the value 1, the mode will be enabled, if 0, it will be disabled;
player.modav carryweight X - increases the maximum volume of your backpack by the specified number of units;
player.setav speedmult X - sets the movement speed to the specified percentage. You can use it when you run with the key held down. The standard value is 100%;
player.setscale X - changes the height of your hero. A value of 1 will be 100%, a value of 2 will be 200%, and so on;
setgs fJumpHeightMin 100 - affects the height of your jumps. A value of 100% is the default setting;
player.setav Health X - makes a change in the number of hit points available to the hero by a given value;
player.setav Magicka X - increases the amount of mana available to the character to the specified parameter. This code for increasing magic in Skyrim will very often help you out;
player.setav Stamina X - increases the maximum stamina level by a specified value. If you set the parameter high enough, then your hero will not get tired during his run;
player.setav attackdamagemult N - increases the damage from your weapon by the nth value;
player.setav leftweaponspeedmult N - increases the speed from attacks with weapons in the left hand by the nth value;
player.setav weaponspeedmult N - increases the speed of attacks with two-handed weapons and weapons in the right hand by the nth value;
player.setav LeftitemCharge N - charges the weapon equipped in the left hand by the specified amount;
player.setav RightitemCharge N - charges a weapon equipped in the right hand by the specified value. You can also find a code for magic damage in Skyrim for enchanted weapons;
player.additem 0000000F N - gives the player the specified number of septims;
player.additem 0000000A N - gives the player the specified number of master keys;
player.placeatme 0010BF90 - Summons a Spectral Horse towards the player. Interestingly, you can summon her even while indoors;
player.setcrimegold 0 - helps to cancel the bounty that was placed on your head in the city where you are currently located;
player.addspell 00092C48 - gives the character the Lycanthropy ability. This is the skill that turns the hero into a werewolf. It will be displayed in the "Talents" section. To activate the skill, simply press the [Z] key. There is no way to cancel the skill, you just need to wait until the transformation takes place automatically in a few minutes.

What's worth knowing?

All of your two-handed weapons count as if they are equipped in the right hand.
A fully charged weapon has a charge level of approximately 3000 units.
Each attack takes approximately 30 units from the charge.
You can set the level to use a code in Skyrim to increase magic and weapon charge to a value that exceeds the maximum amount. This is a very interesting feature. We can say that this is the code for endless magic in Skyrim.

Code for the selected object

For this cheat code to work successfully, you first need to come close to the object, character or animal that interests you. Next, open the console and click on it with the cursor. Afterwards, the console will display the following message: object_ID.

You can use the following codes:

stopcombat - the battle with the selected friendly character will be stopped. It is worth noting that before executing this command, you need to use the code player.setcrimegold 0. If there are several enemies near you, then to stop the battle you need to apply it to all opponents at once, without leaving the console. If at least one NPC continues to attack you, you did not notice and did not apply the code on it, then all the others will continue to attack you. If it doesn't work, you can take the attackers outside the city. Before this, it is advisable to enable immortality mode. Then enter the command tcai - everyone will freeze and stop moving, stand in a convenient place so that all opponents are in your line of sight and, without closing the console, use the stopcombat cheat on each opponent one by one. Afterwards you can disable all previously launched modes. The command only works on friendly characters with whom you have a “random” fight. If it is a story NPC or some kind of monster, then they will attack you no matter what;
kill - the character or animal you selected dies;
resurrect 1 - the selected character or animal will come back to life;
resetai - dialogues will be restored to default, as if you will erase the memory of the selected NPC. Use this command if you killed a character and then restored his life, but after that he does not want to communicate with you;
openactorcontainer 1 - opens the inventory of the selected character. This way you can exchange things with him;
removeallitems - the selected character's inventory will be completely cleared;
equipitem Item_ID N - the selected character will be equipped with the item that you choose for him by entering the ID. This cheat allows you to dress any character in any armor and give him any weapon. The N parameter is an integer that affects whether the NPC can make changes to his equipment or not. A value of 0 allows this to be done, a value of 1 prohibits this, and the character will constantly travel in his new equipment;
inv - will show all items in the inventory of the selected object;
duplicateallitems player - copies all items that were in the inventory of an object or NPC into your backpack;
resetinventory - resets all inventory contents. The selected character will have his standard, initial equipment;
setownership - you will receive ownership of the item you chose;
unlock - opens the lock, regardless of complexity, for the selected item;
markfordelete - deletes the selected character or object. Be careful with this cheat, because you can delete not only any chest, but also invisible objects, which may be necessary for the normal operation of the entire game. So use this command very carefully. The object you created will be deleted immediately, and all others will be deleted only after saving and loading your game. The command that will reverse the completed action is missing. We do not advise you to use such a cheat, because you can freely demolish a wall, floor, or even an entire building.

Please note:

If you plan to use several commands simultaneously for one selected object or character, then there is no need to select it with the mouse each time. After the first selection, it will be saved.
To scroll the text inside the console, use the and keys.
All objects that you created using the player.placeatme cheat have an ID that starts with “FF”.

Managing other NPCs

With the help of such cheats you will be able to control various monsters and characters. The commands must be executed in strict sequence, otherwise nothing will work.

Switch to third-person view by pressing [F]. Then go to the NPC or monster that interests you. Launch the console, click on it with the mouse and enter the following codes in the following sequence: TFC, player.TC, TC, TFC. You can now close your console. If you want to return to the normal game and regain control of your hero, then you need to enter the commands TC, player.TC in the console.

Note on these codes:

Once you take control of a specific NPC, you will be able to move freely, but you will not be able to attack.
By pressing the attack button, the hero will attack you, and not the character over whom you temporarily took control.
It is not known how to make such an NPC start attacking.

Action with companions

Almost any character in the big world of Skyrim can be made your companion. To get someone on your side, simply do the following:

Approach the character that interests you.
Launch the console and select the NPC.
Write a cheat setrelationshiprank player 3.
Next you need to enter the code addfac 0005C84D 1.

Now, when talking to an NPC, the phrase “Follow me...” will be displayed.

Cheat code set playerfollowercount to 0 - you will add a dialogue to receive new followers. As soon as the command is entered, existing partners will also travel with the player, however, you can call another companion. As soon as you choose someone new as your partner, the old one just stops following with you. If you don’t have anyone as a partner at the moment, then the cheat will be useless. The maximum number of available partners is only 1 character.

How to get the dragon cry?

If you want to get the cry of the dragon, all the spells, as well as talents, then you can use the code for magic and screams in Skyrim - “psb”. You can also use another cheat player.teachword. This way you can learn a certain cry that you have not yet found during the passage. You can always find a list of IDs online. If you want to learn the entire shout, then you need to learn each of the three words separately, and the shouts need to be taught in the correct sequence. You must use the code without using square brackets.

To successfully use it, you first need to have a dragon soul to activate the scream. The soul can be obtained after killing a powerful monster. Or you can use the cheat code player.modav dragonsouls N, where n is the number of dragon souls you want to get. But it doesn't add souls, it just changes their meaning to whatever you want.

By using the code player.setav shoutrecoverymult 0, you will not have to wait for the shout to cooldown, that is, the time you need to wait to reuse the desired ability. If you wrote this code immediately after using the shout, you will need to wait for it to recover. After which you can freely scream without respite.

Code that will help you get the necessary inventory

If you need to have a certain item, but you don’t have time to search for or buy it, then you can use the cheat player.additem ID X, where ID is an attribute that indicates a specific item, and X is the amount you need of it subject. For example, if you want codes for destruction magic in Skyrim, then you just need to enter the phrase player.additem 0009cd51 1. As a result, you will receive a book of the “Flame” spell, after reading which you will master the desired spell. If you don't want to read books, then there is another way out. In Skyrim, the code for the destruction magic “Flame” is as follows: player.addspell 00012fcd.

This is how easy it is to learn a spell. This works for any type of magic, you just need to find the appropriate ID. In Skyrim, codes for change magic will help you gain the necessary skills without wasting time searching for the right book in different shops and crypts. We can look at a few more examples. If you are interested in the code for paralysis magic in Skyrim, you can use the following combination: player.addspell 0005ad5f.

As we wrote earlier, you can set the amount of mana to a high value, as a result of which you will practically not need to worry about its consumption. The output is like a code for endless magic in Skyrim. However, if you play paradoxically - you don’t want to be the “god” of Tamriel, but also find yourself in a difficult situation, then you can add the necessary item to yourself, like a mana potion. This cheat code for magic in Skyrim 5 looks like this: player.additem 000FF9FD 1. As a result, you will receive one elixir of additional magic. What does it give? Your magicka will be increased by 100 units within a minute. This code for increasing magic in Skyrim does not particularly elevate you above NPCs, but it also gives you a slight advantage.

Open chests, loot treasures

In the chest you can find items of the class you specified. For example, the chest with staves stores all possible staves in the game. The ingredients chest, if you already guessed it, contains all the available game ingredients.

If you want to get such a valuable item, then you can use the code provided: player.placeatme ID.

Could something happen?

When you open the chest, it is very likely that the game may freeze for a while. Most often this happens with containers of enchanted weapons and armor. The game will freeze for about 30-60 seconds. Don't worry or be nervous, just wait a little and everything will be fine.

Once you open a chest, you can press a key to pick up all the items inside it. In this case, the game may freeze again, but this time for much longer.

Chests that store items of their class actually contain many different items.

Only 1 copy of items is stored inside. If you need several of these things, then just find out its ID and use the code that we showed earlier. For example, you can use a code for magic in Skyrim or a magic item that you found in a chest. It often happens that even avid players did not always find all the staves and other magical loot available in the game.

What else can help your magic?

In addition to the fact that there are codes for life, powers and magic in Skyrim, you can also get useful talents. They will help increase your magical abilities and make you a stronger magician. For example, among the codes for a supply of magic in Skyrim, you can find one that will help you learn the “Sign of the Atronach” talent. His ID is 000E5F50. With this talent, you will receive +50 units of mana, you will absorb 50% of all spells that hit you, but the recovery of mana will be 50% slower.

Another code for increasing magic in Skyrim will be the addition of the “High Origin” talent. His in-game ID is 000E40C8. With this talent you will receive an extra 50 units of magic, and your mana will be restored faster within one minute.

As you can see, they are diverse. You will be able to not only get a mana boost, but also learn the necessary shouts, spells and talents needed in battle. You will also be able to choose the right equipment and weapons for yourself, which will turn you into a real magical “death machine”.

Making a beautiful home

Many of you, having had enough of hunting dragons, vampires or fighting Miraak, decided to simply enjoy the hearth and home. You can create a cozy, beautiful home where you will sometimes spend time, store valuable loot and raise children. However, if you need to create an item, such as a weapon or armor, improve it, or prepare a useful elixir, then you will have to look for the necessary devices for this. With the help of cheat codes you will be able to arrange an effective workspace, with all the necessary equipment.

To acquire useful machines for crafting, you can use the code provided - player.placeatme ID. Thus, after you enter the cheat player.placeatme 000BBCF1 in the console, you will have your own heavenly forge for your productive work.

77761 is the ID for the light source. It is invisible and cannot be selected, deleted or moved once installed. It will help you illuminate a dark room. If you want to place several similar light sources at once, then in the cheat code after the ID write the number of sources that you require. You cannot add more than 10 units.

Good to know

When you create objects, they will appear directly in front of you. If you need to place an item "flatly", then before using the cheat code, try to center your character's gaze so that he looks straight.

There is no specific code that will give you legendary quality armor and weapons. It is best to get your Blacksmithing skill to 100%, which will give you the most powerful items.

The codes work in the game with a 90% probability. It's worth noting that they are case sensitive. You need to enter them only as they are written here. We remind you again that before you start editing the game, it is best to make a backup copy of your save to be calm. Not every code can be canceled, so pre-saving will certainly not be superfluous.

Cheats for Skyrim are bad form. But if cheating is done through legal means, everything changes! Using console commands, any player can do very, very much, turning himself into a game god in the literal sense of the word! Here are the most interesting console commands in Skyrim:

The video will show you a selection of the most interesting options, and then you can continue reading.

tgm
God mode, you become invulnerable and can do anything. The video shows what you can achieve:

tcl
Addition to God Mode: You can go to heaven or underground, anywhere, there are no barriers for you.

unlock
The lock won't budge? You don’t have a key, but your lockpicking skills are low? Write this in the console and you will become the best bugbear in Skyrim.

psb
You will learn all the spells in the game.

player.advlevel
You get a new level! Leveling up is easier than ever

caqs
Completes all stages of the main quest, making playing Skyrim almost pointless.

showracemenu
You can change your race, but this will reset all levels and skills.

player.modav skill X
Changes the skill "skill" to the amount of "x".

player.additem ITEM ###
Adds an item with the specified code and in the specified quantity to the player's inventory.

player.additem 0000000f ###
Adds from 1 to 999 gold coins.

player.additem 0000000a “###”
Adds several lockpicks.

tm
Disables all game menus, great for taking screenshots.

tmm
Enables or disables markers on the map.

tfc
Gives access to a flying map, allowing you to view the world from the height of a dragon's flight

tai
Disables artificial intelligence. Fully

tcai
Toggles enemy AI on or off, turning dragons into pincushions

tdetect
Enables or disables the ability to detect crimes: murder, theft.

player.setcrimegold ###
Can increase or decrease the player's "crime" level

player.setlevel ##
Increases or decreases the player's level by a specified amount.

player.setav speedmult ###
Allows you to increase speed to sky-high values.

movetoqt
Directs you to the quest goal

kill
Kills the target. Simple and effective.

killall
Kills everyone. Nuff said.

help
Shows all console commands

resurrect
Resurrects the target so you can kill them again

player.modav carryweight #
Changes the weight of items worn by the player.

setpcfame #
Increases the character's fame.

setpcinfamy #
Increases the fame of NPCs.

player.setav fatigue #
Allows you to get rid of the annoying feeling of fatigue that for some reason the character experiences.

player.setav health #
Increases health

qqq
Quit the game quickly and easily.

removeallitems
Removes all items, including clothing, from the target.

sexchange
Changes the gender of the target.

set timescale to #
Allows you to speed up or reduce the passage of time.

Use these Skyrim console commands at your own risk. Remember - cheating on the first playthrough can kill all the fun!

The Elder Scrolls V: Skyrim is the best game of 2011 according to numerous gaming publications, the one and only of its kind. Of course, it’s better to go through the game without using any cheats or codes, but if you’re stuck at a certain point or simply want to have a good time, Skyrim codes are just what the Dovahkiin ordered.

Let's start with the main thing, namely, turning on the English language in the console. First you need to go to the "Documents" folder, find the "My Games" folder there, and "Skyrim" in it. In the "Skyrim" folder, find the Skyrim.ini file. Press Ctrl+F (search) or scroll down until you find the lines:

sLanguage=RUSSIAN

After these lines add (do not replace):

sConsole=ENGLISH

Close the file and save your changes. Congratulations, the console now appears in English. If, for some reason, the language remains Russian, set English as the default language in the operating system (Settings - Control Panel - Regional and Language Standards - Languages - more details. Then select English as the default language in the menu).

Now, you can start entering Skyrim codes and cheats. To do this, go into the game and press the tilde ~ key on the keyboard (in the Russian keyboard layout E) - the game console will open.

The main and most powerful The Elder Scrolls V codes:

tgm- god mode (health, mana and stamina are not consumed, weight does not matter - carry as much as you want);
player.modav carryweight X- where X is the weight that the main character can carry;
tmm 1- after entering this code, all markers will appear on the map and you will be able to move freely between them;
tcl- now you can pass through walls and fly;
psb- adds all possible screams and talents;
tmm 1- with this Skyrim code you can open all possible locations;
tim- in our opinion, one of the most useful Skyrim cheats - health, mana, energy decrease, but when health decreases to zero, the main character does not die;
player.modav magicka X- where X is the number of magic points that you want to add to your hero;
player.modav health X- where X is the number of life points that you want to add to your hero);
player.modav stamina X- where X is the number of stamina points that you want to add to your hero;
player.setav weaponspeedmult X- where X is the weapon strike speed multiplier. For example, the code player.setav weaponspeedmult 3 increases the speed of damage by 3 times;
killall- with this code you can kill all the enemies around;

The Elder Scrolls V codes for improving skills and abilities (perks):

If you want to upgrade all your skills at once, you can enter first several times
advskill Destruction 999999
and then:
player.setav Destruction 0

Repeat the operation until you have the required number of ability points. If you don’t want to make your hero an invincible superman, but just upgrade some of his skills, then you should use the following Skyrim cheats:

advskill X Y- where X is the name of the skill, Y is the number of experience units (not ability points!) that you want to add. For example, advskill Marksman 200 - add 200 experience points to the Marksman (shooter) ability;
player.setav X Y- where X is the name of the skill, Y is the level of the skill that you want to set. Example: player.setav Sneak 50 - set the Sneak skill (stealth) to level 50.
player.setlevel X- where X is the desired level of your hero. Example: player.setlevel 100 - set the character to level 100.

To use these Skyrim codes you need to know the name of all the skills:

Thief:

Alchemy- speeds up the production of potions (Alchemy);
LightArmor-increases the effect of wearing armor (Light armor);
Lockpicking- opening locks using master keys (Hacking);
Pickpocket- effectiveness of stealing from other characters (Pickpocket);
Sneak- the main skill for a thief (Stealth);
Speechcraft- increases the chance to persuade/intimidate/bribe characters (Speech);

Mage:

Alteration- necessary to improve auxiliary and defensive spells (Change);
Conjuration- it will be much easier to attract creatures to your side (Witchcraft);
Destruction- enhances magic and elemental weapons (Destruction);
Enchanting- strengthening things (clothing, weapons) using magic (Enchantment);
Illusion- you can better influence the minds of characters (Illusion);
Restoration- helps to heal wounds faster and kill undead more effectively (Recovery);

Warrior:

Block- increasing the quality of blocking damage using a shield or weapon (Blocking);
HeavyArmor- increased effect of heavy armor + increased bonus from collecting all set items (Heavy armor);
Marksman- increases the effect of using bows (Shooting);
Onehanded- improving mastery of weapons held in one hand + adding new techniques (One-handed weapons);
Smithing- crafting weapons and armor at the forge (Blacksmithing);
Two-handed- improvement of mastery of weapons that are in both hands + adding new techniques (Two-handed weapons).

Skyrim codes to enhance skills

To increase weapon damage and armor effect use the following code:
player.setav X Y- where X is the skill you are improving, and Y is the percentage of increase. For example, the code player.setav OneHandedPowerMod 300 increases the base damage of one-handed weapons by 300%

Here is a list of skills that you can improve with this Skyrim cheat:

AlchemyPowerMod- speeding up the preparation of potions (alchemy);
AlterationPowerMod- strengthening the “change” skill;
BlockPowerMod- improving shields;
ConjurationPowerMod- improvement of witchcraft skills;
DestructionPowerMod- improvement of destruction skills;
EnchantingPowerMod- increasing enchanting skills.
HeavyArmorPowerMod- increasing the effectiveness of heavy armor;
IllusionPowerMod- increases the influence on the minds of other characters (illusion);
LightArmorPowerMod- increasing the effectiveness of light armor;
LockpickingPowerMod- improving burglar skills;
MarksmanPowerMod- improving bow skills;
OneHandedPowerMod- improvement of mastery of weapons that are used in one hand;
PickPocketPowerMod- improving pickpocket skills;
RestorationPowerMod- faster recovery of health;
SmithingPowerMod- improvement of blacksmithing skill;
SneakPowerMod- increasing stealth and secrecy;
SpeechcraftPowerMod- increasing persuasion skills (eloquence);
TwoHandedPowerMod- improving skills in using weapons that are used with both hands at once.

The Elder Scrolls V: Skyrim cheats for vampirism

An integral feature of all The Elder Scrolls games is vampirism. After being hit by the vampire Life Drain spell, you have a 10% chance that you will become a vampire within three days. In order not to wait until the vampire thinks of biting you, you can use the code player.addspell 000B8780. After this, you need to wait three days in the hope of becoming a vampire (a sure sign that you have joined the vampire fraternity - in the “Magic”, “Active Effects” section you will see the inscription “Vulnerability to Fire”).

If you change your mind or want to get rid (within 72 hours) of the evil vampirism virus, then use the code player.removespell 000B8780. Please note that if you have already turned into a bloodsucker, this code will not work.

In this case, use the code setstage 000EAFD5 10- treatment for vampirism, but it can only be used once in the entire game. There are times when a player has become a vampire twice and the above The Elder Scrolls V code does not help, then try the following:

Make a new save of the current game;
- type the code in the console resetquest 000EAFD5, then make another new save and load it immediately;
- dial code setstage 000EAFD5 10.

If you do everything right, you will stop being a vampire.

The Elder Scrolls V codes for working with objects

Before writing the required code in the console, you need to select the object. To do this, open the console, come close to the desired object and left-click on it - the object id should appear in the console. Now you can enter the codes:

kill- kill (affects both characters and animals);
resurrect 1-resurrect (also affects corpses of animals and people);
resetai-reset dialogues to default (if, when communicating with an NPC, you chose the wrong answer or they simply refuse to communicate with you, then you can always “erase” the scoundrel’s memory and start dating “from scratch”);
Markfordelete-completely and permanently delete this character or object (you need to be extremely careful when using this code - you can easily delete an object such as an entire building).

The Elder Scrolls V codes for working with inventory:

setownership- receive the selected item as your property;
unlock- open/unlock the selected item;
inv-show the object's inventory;
openactorcontainer 1- open the inventory of a character or creature to exchange items;
removeallitems- - make the inventory of the selected creature empty;
equipitem X- where X is the id of the item - give the selected character a specific item;

With the following command you can add/summon the required number of items or creatures:
player.placeatme X Y- where X is the id of the item or character, Y is the number of items. For example, player.placeatme 000bad0c- calls the alchemical laboratory, player.placeatme000f811d- Summons an ancient dragon.