1c accounting requirements for the operating system. Technical requirements

. 1s 8 requirements + for the computer

2016-03-08

1s 8 requirements + for the computer

System requirements for installing the 1C:Enterprise system 8.3 | Tavalik.ru

This article provides the requirements for the hardware and software required to install the 1C:Enterprise system. 8.3 (system requirements for version 8.2 can be viewed here). The various types of 1C:Enterprise clients and the minimum system requirements for launching a 1C:Enterprise server cluster, as well as the types of supported DBMSs, are separately considered.

Below are the official system requirements at the time of writing for the 1C:Enterprise system version 8.3 , for launch options:

Fat client

Thin client

Web client

Mobile platform

Web server

32-bit server

64-bit server

Supported DBMS

Other requirements

1. Thick client

To install a thick client, the end user's computer must meet the following requirements:

SVGA display.

If this computer will be used for developing configurations, then it must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher, Windows Server 2003 and higher, Fedora 17 and higher, Mint 12 and higher, Ubuntu 12.04 LTS and higher, Alt Linux SPT 6.0 and higher;
Intel Pentium/Celeron processor 2400 MHz or higher;
RAM 2 GB or higher (4 GB recommended);
Hard drive (about 300 MB used during installation);
SVGA display.

Also, the requirements for RAM when running a thick client and developing configurations are influenced by the functional fullness of the configuration.

2. Thin client

To install a thin client, the end user's computer must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher, Windows Server 2003 and higher, Fedora 17 and higher, Mint 12 and higher, Ubuntu 12.04 LTS and higher, Alt Linux SPT 6.0 and higher;
Intel Pentium/Celeron processor 1800 MHz or higher;
RAM 1 GB or higher;
Hard drive (about 70 MB used during installation);
SVGA display.

3. Web client

The requirements for running the web client are mainly determined by the web browser you are using. List of supported browsers:

for Windows OS:
- Mazilla Firefox 17 and above;
- Microsoft Internet Explorer 8.0 and higher;
- Google Chrome 4 and above;
- Safari 4.0.5 and higher.
for Linux OS:
- Mazilla Firefox 17 and above;
for MacOS X:
- Safari 4.0.5 and higher (for MacOS X version 10.5 and higher).

In general, the end user's computer must meet the following requirements:

Intel Pentium/Celeron processor 1800 MHz or higher;
RAM 1 GB or higher;
Hard drive (about 250 MB used during installation);
SVGA display.

For computers with a small amount of memory and a low-performance processor, it is recommended to use version 9.0 of the Microsoft Internet Explorer browser or use other browsers supported by the 1C:Enterprise system.

4. Mobile platform

For iOS devices:

iOS – version 5.1 and older;
iPhone – 3GS and older;
iPod Touch – 3rd generation and older;
iPad – all versions;
iPad mini.

For devices based on Android OS:

Android – version 2.2 and older;
CPU:
- with architecture ARMv5TE and higher (ARMv6, ARMv7, ARMv8);
- with Intel x86 architecture.
RAM – at least 256 MB;
Touch screen.

5. Web server

The 1C:Enterprise system supports work with the following web servers:

Microsoft Internet Information Services (IIS) versions 5.1 and higher;
Apache HTTP Server versions 2.0 and higher;

If a web server is used to access the file version of the infobase, then the following requirements apply to the computer on which the web server and web server extension are running:

Intel Pentium/Celeron processor 1800 MHz or higher;
RAM 1 GB or higher (2 GB recommended);
Hard drive (about 300 MB used during installation);

6. 32-bit server

A production server that is part of a 32-bit 1C:Enterprise server cluster must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher or Microsoft Windows Server 2003 and higher, one of the supported Linux distributions;
Intel Pentium/Xeon processor 2400 MHz and higher, it is desirable to use multiprocessor or multi-core machines, since the presence of several processors/cores has a beneficial effect on the throughput of a 1C:Enterprise server cluster, especially in the case of intensive work by several users;
RAM memory of at least 2 GB. And although the work processes of a 1C:Enterprise server cluster can be executed in fairly small amounts of memory, during peak loads their needs can be quite significant;

7. 64-bit server

A production server that is part of a 64-bit 1C:Enterprise server cluster must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher or Microsoft Windows Server 2003 and higher, one of the supported Linux distributions for x86-64;
Processor with x86-64 architecture (Intel with support for Intel 64, AMD with support for AMD64), it is desirable to use multiprocessor or multi-core machines, since the presence of several processors/cores has a beneficial effect on the throughput of a 1C:Enterprise server cluster, especially in in case of intensive work of several users;
RAM of at least 2 GB (4 GB or higher recommended). And although the work processes of a 1C:Enterprise server cluster can be executed in fairly small amounts of memory, during peak loads their needs can be quite significant;
Hard drive (about 200 MB used during installation).

8. Supported DBMS

The bitness of the 1C:Enterprise server is not related to the bitness of the DBMS. Servers (1C:Enterprise server and DBMS) of different capacity can be used together. The 1C:Enterprise system supports the following DBMS:

Microsoft SQL Server 2000 (SP4 recommended) and higher;
PostgreSQL 8.1 and higher;
IBM DB2 v9.1 and higher;
Oracle Database 10g Release 2 and higher.

9. Other requirements

If you use USB hardware keys like HASP4 Net from Aladdin, you must have a USB port to connect the hardware protection key.
For the software licensing system to function, the WMI (Windows Management Instrumentation) service must be running on the computer.
Collaboration with a file infobase over a network is supported only for network resources accessed via the SMB (CIFS) protocol. Such resources can be located on both Windows and Linux computers.
The maximum number of simultaneous connections from one file infobase is 1024.
The user on whose behalf the client application is running must have the “List folder contents” right to the directory of temporary OS files.
The user on whose behalf the server is running must have the “List folder contents” right to the directory of temporary OS files.
The user on whose behalf the server is running must have the “Read” right to the directory of temporary files in the Linux OS.
If the 1C:Enterprise server cluster and the database server are installed on different computers, system performance can be significantly affected by the performance of the network connection between the 1C:Enterprise server cluster computers and the database server computer. It is recommended to use network cards with a bandwidth of 100 Mbit or higher.
For normal operation of 1C:Enterprise in the client-server mode, it is necessary to disable the use of energy-saving Sleep, Standby and Hibernate modes on client computers.
For the file information base, for the operation of the 1C:Enterprise Web server running Linux, the following library is required on a computer with a web server:
- UnixOdbc version 2.2.11 and higher for using external data sources on the 1C:Enterprise web server.
To work under Linux OS, you must have the following libraries installed:
- Webkitgtx 1.2.5 and higher;
- ImageMagick 6.2.8 and higher;
- Freetype 2.1.9 and higher;
- Libgsf 1.10.1 and higher;
- Glib 2.124 and higher;
- Kerberos 1.4.2 and higher;
- GSS-API Kerberos 1.4.2 and higher;
- Microsoft Core Fonts;
- UnixODBC 2.2.11 and higher for using external data sources on the 1C:Enterprise server.

Did this article help you?

end user computer:
- operating system: Microsoft Windows 98/Me, Microsoft Windows 2000/XP/Server 2003/Vista (Microsoft Windows XP recommended)
- Intel Pentium II processor 400 MHz or higher (Intel Pentium III 866 MHz recommended);
- RAM 128 MB or higher (256 MB recommended);
- USB port;
- SVGA display;
computer used to develop configurations:
- operating system: Microsoft Windows 2000/XP/Server 2003/Vista (Microsoft Windows XP recommended);
- Intel Pentium III 866 MHz processor or higher (Intel Pentium IV/Celeron 1800 MHz recommended);
- RAM 512 MB or higher (1024 MB recommended);
- hard drive (about 220 MB is used during installation);
- CD reader;
- USB port;
- SVGA display;
Server cluster 32-bit production server:
- Microsoft Windows 2000/XP/Server 2003/Vista operating systems or one of the Linux distributions (the current list of supported Linux distributions is published);
- processor not lower than Pentium III 866 MHz (Intel Pentium IV/Xeon 2.4 GHz recommended). It is acceptable and even desirable to use multiprocessor machines, since the presence of several processors has a beneficial effect on the throughput of a 1C:Enterprise 8.1 server cluster, especially in the case of intensive work by several users;
- RAM of at least 512 MB (recommended 1024 MB and higher). Although work processes of a 1C:Enterprise 8.1 server cluster can be executed in fairly small amounts of memory, during peak loads their needs can be quite significant;
- CD reader;
Server cluster 64-bit production server:
- Microsoft Windows XP/Server 2003/Vista operating systems for x64 or one of the Linux distributions for x86-64 (the list of distributions is published);
- processor with x86-64 architecture (Intel with support for EM64T, AMD with support for AMD64). It is acceptable and even desirable to use multiprocessor machines, since the presence of several processors has a beneficial effect on the throughput of a 1C:Enterprise 8.1 server cluster, especially in the case of intensive work by several users;
- RAM 1024 MB or higher. And although the work processes of a 1C:Enterprise 8.1 server cluster can be executed in fairly small amounts of memory, in peak situations their needs can be quite significant;
- a USB port is required to connect a hardware protection key for a 1C:Enterprise 8.1 server cluster;
- CD reader;
database server:
- Microsoft SQL Server 2000 + Service Pack 2 (Service Pack 4 recommended);
- Microsoft SQL Server 2005;
- PostgreSQL 8.1;
- PostgreSQL 8.2;
- IBM DB2 Express-C 9.1;
database server computer:
- Any computer that can run Microsoft SQL Server, PostgreSQL or IBM DB2 can be used as a database server. The technical specifications of the computer and operating system must meet the requirements of the version of the Microsoft SQL Server, PostgreSQL or IBM DB2 database server used.

These values can be used as base values when choosing the composition of equipment for solving enterprise automation problems.

Of course, when choosing hardware for a specific implementation, it is necessary to take into account various factors: the functionality and complexity of the application solution (configuration) used; the composition and variety of typical actions performed by one or another group of users; number of users and intensity of their work, etc.

This document provides information on how equipment characteristics affect the efficiency of using the system in various modes and provides recommendations for selecting equipment depending on the tasks being solved.

Client computers

"1C:Enterprise 8" places higher demands on processor performance and the amount of RAM installed on the client computer compared to version 7.7. This is due to the great capabilities and functionality of the 1C:Enterprise 8 client interface. "1C:Enterprise 8" implements a modern interface design and improves comfort when users work with the system for a long time. The system interface is designed taking into account the need for mass input of information, as well as taking into account the work of novice users. A more detailed description of the new interface capabilities can be found on the website at http://www.v8.1c.ru/interface/index.htm. Different modes of an application solution may use user interface capabilities to varying degrees. With increasing complexity and functional load of the application solution interface in specific modes used by a certain group of users, the requirements for processor performance and RAM capacity increase. For example, if you use document entry forms with a large amount of additionally displayed information characterizing goods, counterparties, etc., then for comfortable work with this form it is advisable to use a more powerful processor.

The requirements for processor performance and the amount of RAM installed on the computer largely depend on the nature of the tasks solved by a particular user. For example, the characteristics of computers used by operators to enter documents may correspond to the recommended ones, but managers and analysts who work intensively in various modes and perform, for example, analysis of large volumes of information, may require more powerful computers.

Note that when using the file version, the performance of client computers has a greater impact on the overall system performance (especially in multi-user mode) than when using the client-server version. Unlike the file-server option, when using the client-server option, the resources of the client computer are used primarily to ensure the operation of the interface part, and the performance of operations associated with recording and processing data is determined mainly by the characteristics of the server hardware.

Server 1C:Enterprise 8

When determining the parameters of the computer on which the 1C:Enterprise 8 server will run, you need to take into account the following factors:

Location of the 1C:Enterprise 8 server and MS SQL Server (on the same computer or on different ones).
The number of concurrent users who intensively perform information entry or report generation operations.
The volume of information processed in the current period.
Load distribution between server and client (implemented in an application solution).

If the 1C:Enterprise 8 server and MS SQL Server are located on the same computer, then the requirements of each application for the computing resources of this computer are summed up. Locating the 1C:Enterprise 8 server on a separate computer allows you to reduce the requirements for the disk subsystem of this computer and significantly reduce its cost, most of which is the cost of the RAID controller and SCSI drives. In this case, the main factors affecting performance are the clock speed and number of processors, as well as the amount of RAM. Studies conducted to evaluate the performance and scalability of the client-server version of 1C:Enterprise 8 have shown that when 140 active sessions are running simultaneously, relatively low requirements are placed on the computer on which the 1C:Enterprise server is installed. During the tests, we used a computer with two Intel Xeon 2.4 GHz 512KB cache and 1024 MB RAM installed. Increasing the amount of RAM may be useful when creating reports if the period for which data is processed increases. The location of the 1C:Enterprise 8 server and MS SQL Server on different computers allows the administrator to distribute the load between the servers. Using the 1C:Enterprise 8 server allows you to concentrate on it the most extensive data processing operations. For example, when executing even very complex queries, the program running for the user will receive only the selection it needs, and all intermediate processing will be performed on the server.

This allows you to reduce the requirements for client computers, while, naturally, the requirements for the computer on which the 1C:Enterprise 8 server is installed increase. However, it is usually much easier to increase server capacity than to update a fleet of client machines.

Database server

The mechanism for working with the 1C:Enterprise 8 database is focused on effectively using the capabilities of MS SQL Server to record information, perform calculations and generate reports. This allows you to reduce the load on the client part when processing data and reduce the amount of information transferred to the client computer.

The main factors affecting the performance of MS SQL Server are the volume of the information base, the number of concurrent users and the type of tasks performed by users (entering documents, generating reports, etc.).

To assess, for a specific implementation, the server characteristics (clock speed, number of processors and amount of RAM) necessary to provide the required throughput and system response time, you should take into account the intensity of user work in the application solution used, the volume of the information base and the number of concurrent users. These parameters must be evaluated for both normal and peak system operation. In addition, it is necessary to evaluate the projected increase in the number of system users and the possible increase in the volume of the information base.

RAM is primarily used by SQL Server to cache read/write operations when performing database activities. Therefore, with an increase in the volume of processed information, in order to maintain the level of performance at an acceptable level, an increase in the amount of RAM is required. Otherwise, there is a significant reduction in the speed of read/write operations, since the data that SQL Server works with is not in memory, but on disk. This leads to a significant decrease in system performance as a whole.

Selecting a computer for 1s 8.3.

The 1C program is very convenient and rightfully occupies one of the leading positions in the Russian software market.

Here is a quote from the official website of the 1C company:

The 1C company certifies computers for compatibility with the 1C:Enterprise software system versions 8.3.

Computers that have passed certification receive a certificate certifying their compatibility with the 1C:Enterprise software system, as well as the right to use the “Compatible! Software system 1C:Enterprise".

Computers with characteristics no worse than:

32-bit 1C:Enterprise server:

· System requirements

· Intel Pentium IV/Xeon processor 2.4 GHz or higher

· RAM 1024 MB or higher

· Hard drive 40GB or higher

USB port

SVGA video card

64-bit 1C:Enterprise server:

· System requirements

· Processor with x86-64 architecture (Intel with EM64T support, AMD with AMD64 support).

· RAM 2048 MB or higher

· Hard drive 40GB or higher

· CD Reader

USB port

SVGA video card

Let's try to choose the right computer for 1C 8.3.

I will say right away that the system requirements indicated above are met only with great reserve, and are not sufficient for comfortable work. My program runs on my processor. core I 5 s 8 gigs of memory and a 10,000 rpm hard drive with fast Internet, and the databases are not updated as quickly as we would like. I was interested in this question, and I collected information on the optimal system requirements.

Best for entry level.

Entry-level solution based on Intel I3 processor. The combination of three main system components: the central processor Intel I 3, sufficient 4GB RAM. We getEntry-level system kit for office tasks and multimedia home use.

Optimal configuration at a discount, you can work comfortably.

A quad-core computer with a clock frequency of 2.9 Gigahertz with 4GB of RAM, with a regular hard drive for storing information. The most popular model.

Average, you can work comfortably and wait much less for processing.

Quad core computer core I 5 with a clock frequency of 3.0 Gigahertz with RAM 4 GB., with a regular hard drive.

Excellent, you can work comfortably, processing occurs quickly.

Quad core computer core I 5 with a clock frequency of 3.2 Gigahertz with 16GB RAM, with hard drive SSD (an operating system is installed on it) and with a regular hard drive with a rotation speed of 7200 rpm.

Computers can also be selected with processors AMD similar in frequency.

System requirements for a computer with the 1C 8.2 program are approximately the same. The higher your requirements for the program, the better. It is better to take iron with a reserve of power. This will help save you time.

For 1C 7 seventh versions, the system requirements are much lower.

This article provides the requirements for the hardware and software required to install the 1C:Enterprise system. 8.3 (system requirements for version 8.2 you can see). The various types of 1C:Enterprise clients and the minimum system requirements for launching a 1C:Enterprise server cluster, as well as the types of supported DBMSs, are separately considered.

Below are the official system requirements at the time of writing for the 1C:Enterprise system version 8.3 , for launch options:

1. Thick client

SVGA display.

If this computer will be used for developing configurations, then it must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher, Windows Server 2003 and higher, Fedora 17 and higher, Mint 12 and higher, Ubuntu 12.04 LTS and higher, Alt Linux SPT 6.0 and higher;
Intel Pentium/Celeron processor 2400 MHz or higher;
RAM 2 GB or higher (4 GB recommended);
Hard drive (about 300 MB used during installation);
SVGA display.

Also, the requirements for RAM when running a thick client and developing configurations are influenced by the functional fullness of the configuration.

2. Thin client

To install, the end user's computer must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher, Windows Server 2003 and higher, Fedora 17 and higher, Mint 12 and higher, Ubuntu 12.04 LTS and higher, Alt Linux SPT 6.0 and higher;
Intel Pentium/Celeron processor 1800 MHz or higher;
RAM 1 GB or higher;
Hard drive (about 70 MB used during installation);
SVGA display.

3. Web client

The requirements for are mainly determined by the web browser used. List of supported browsers:

for Windows OS:
- Mazilla Firefox 17 and above;
- Microsoft Internet Explorer 8.0 and higher;
- Google Chrome 4 and above;
- Safari 4.0.5 and higher.
for Linux OS:
- Mazilla Firefox 17 and above;
for MacOS X:
- Safari 4.0.5 and higher (for MacOS X version 10.5 and higher).

In general, the end user's computer must meet the following requirements:

Intel Pentium/Celeron processor 1800 MHz or higher;
RAM 1 GB or higher;
Hard drive (about 250 MB used during installation);
SVGA display.

4. Mobile platform

For iOS devices:

iOS – version 5.1 and older;
iPhone – 3GS and older;
iPod Touch – 3rd generation and older;
iPad – all versions;
iPad mini.

For devices based on Android OS:

Android – version 2.2 and older;
CPU:
- with architecture ARMv5TE and higher (ARMv6, ARMv7, ARMv8);
- with Intel x86 architecture.
RAM – at least 256 MB;
Touch screen.

5. Web server

The 1C:Enterprise system supports work with the following web servers:

(IIS) versions 5.1 and higher;
Apache HTTP Server versions 2.0 and higher;

If a web server is used to access the file version of the infobase, then the following requirements apply to the computer on which the web server and web server extension are running:

Intel Pentium/Celeron processor 1800 MHz or higher;
RAM 1 GB or higher (2 GB recommended);
Hard drive (about 300 MB used during installation);

6. 32-bit server

The production server that is part of the 32-bit must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher or Microsoft Windows Server 2003 and higher, one of the supported Linux distributions;
Intel Pentium/Xeon processor 2400 MHz and higher, it is desirable to use multiprocessor or multi-core machines, since the presence of several processors/cores has a beneficial effect on the throughput of a 1C:Enterprise server cluster, especially in the case of intensive work by several users;
RAM memory of at least 2 GB. And although the work processes of a 1C:Enterprise server cluster can be executed in fairly small amounts of memory, during peak loads their needs can be quite significant;

7. 64-bit server

The production server that is part of the 64-bit must meet the following requirements:

Operating system Windows XP Service Pack 2 and higher or Microsoft Windows Server 2003 and higher, one of the supported Linux distributions for x86-64;
Processor with x86-64 architecture (Intel with support for Intel 64, AMD with support for AMD64), it is desirable to use multiprocessor or multi-core machines, since the presence of several processors/cores has a beneficial effect on the throughput of a 1C:Enterprise server cluster, especially in in case of intensive work of several users;
RAM of at least 2 GB (4 GB or higher recommended). And although the work processes of a 1C:Enterprise server cluster can be executed in fairly small amounts of memory, during peak loads their needs can be quite significant;
Hard drive (about 200 MB used during installation).

8. Supported DBMS

Microsoft SQL Server 2000 (SP4 recommended) and higher;
PostgreSQL 8.1 and higher;
IBM DB2 v9.1 and higher;
Oracle Database 10g Release 2 and higher.

9. Other requirements

If used type HASP4 Net from the company Aladdin, you need a USB port to connect the hardware protection key.
To function, the WMI (Windows Management Instrumentation) service must be running on the computer.
Collaboration with a file infobase over a network is supported only for network resources accessed via the SMB (CIFS) protocol. Such resources can be located on both Windows and Linux computers.
The maximum number of simultaneous connections from one file infobase is 1024.
The user on whose behalf the client application is running must have " List of folder contents» to the OS temporary files directory.
The user on whose behalf the server is running must have " List of folder contents" to the OS temporary files directory.
The user on whose behalf the server is running must have the right " Reading" to the temporary files directory in Linux OS.
If the 1C:Enterprise server cluster and the database server are installed on different computers, system performance can be significantly affected by the performance of the network connection between the 1C:Enterprise server cluster computers and the database server computer. It is recommended to use network cards with a bandwidth of 100 Mbit or higher.
For normal operation of 1C:Enterprise in the client-server mode, it is necessary to disable the use of energy-saving modes on client computers Sleep, Standby And Hibernate.
For the file information base, for the operation of the 1C:Enterprise Web server running Linux, the following library is required on a computer with a web server:
- UnixOdbc version 2.2.11 and higher for using external data sources on the 1C:Enterprise web server.
To work under Linux OS, you must have the following libraries installed:
- Webkitgtx 1.2.5 and higher;
- ImageMagick 6.2.8 and higher;
- Freetype 2.1.9 and higher;
- Libgsf 1.10.1 and higher;
- Glib 2.124 and higher;
- Kerberos 1.4.2 and higher;
- GSS-API Kerberos 1.4.2 and higher;
- Microsoft Core Fonts;
- UnixODBC 2.2.11 and higher for using external data sources on the 1C:Enterprise server.

Did this article help you?

We tested computers in different price categories for you.

Very often, clients turn to us with a request to select a computer that will “work well with 1C,” that is, will not “slow down” or freeze.

This is due to the fact that users who saved on purchasing or bought computer equipment 3-5 years ago are now faced with the fact that 1C works extremely slowly and slows down the work process.

It is generally accepted that you can buy the simplest computer for an office to work with documents and 1C, because It will not run resource-intensive games or 3D modeling programs. But this is a mistake! In recent years, accounting programs have evolved into powerful analysis tools that provide specific workloads and consume much more resources.

We conducted an experiment and found out what parameters of the system unit will allow 1C to work as efficiently as possible!

We tested using special processing, which, when tested, triggers the simultaneous posting of 150 documents of different types, but intersecting in registers (PKO, RKO and RTU) in the working database "1C: Accounting", ed. 3.0 of the current release with the “Taxi” interface. Database volume is 4 GB.

Tests were carried out on 6 computers of different configurations:

different processors 4 and 8 cores.

amount of RAM 4 – 8 GB, with and without SSD drive Silicon Power SATA-III 60Gb SP060GBSS3S60S25 S60 2.5" w490Mb/s.

software: Windows 10 PRO 64 bit.

Test copy No. 1

Processor: AMD FX 4330, (4 cores, 4 GHz, 95W)

2 pcs.

Hard drive: HDD Toshiba 500 GB HDWD105UZSVA P300
Cost: 16,200 rub.

Test copy No. 2

Processor: AMD FX 8320E, (8 cores, 3.2 GHz and 4 GHz Turbo)

Motherboard: Asus M5A78L-M LX3 Soc-AM3 AMD760G

RAM: Memory DDR3 4Gb 1333MHz Kingston Kingston KVR13N9S8/4-SP 2 pcs

Cost: 21,900 rub.

Test copy No. 3

Processor: AMD A4-6300 Richland (FM2, L2 1024Kb)

Motherboard: Asus A68H

RAM: Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP

Hard disk (HDD): HDD Toshiba 500 GB HDWD105UZSVA P300
Cost: 12,500 rub.

Test copy No. 4

Processor: Intel® Core™ i3-4170 Processor3M Cache, 3.40 GHz

RAM: Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP

Hard disk (HDD): HDD Toshiba 500 GB HDWD105UZSVA P300
Price: 22 500 R.

Test copy No. 5

Processor: Intel® Celeron® Processor G1840 2M Cache, 2.80 GHz

Motherboard: Asus H81 chipset

RAM: Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP

Hard disk (HDD): HDD Toshiba 500 GB HDWD105UZSVA P300
Price: 18 000 R.

Test copy No. 6

Processor: Intel® Pentium® Processor G3260 3M Cache, 3.30 GHz

Motherboard: Asus H81 chipset

RAM: Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP

Hard disk (HDD): HDD Toshiba 500 GB HDWD105UZSVA P300
Price: 19 400 R.

After installing and launching 1C: Accounting 3.0, leaders and outsiders immediately emerged.

The minimum loading time took ~45 seconds, the maximum ~2 minutes. 10 sec. Test specimen No. 2 showed the best operating speed, while specimen No. 5 turned out to be an outsider. It was in the basic configuration that instance No. 2 exceeded the loading speed of three 1C sessions by almost 3 times, relative to No. 5.

In second place was specimen No. 1. The remaining configurations showed approximately the same results: ~1 min 10 sec.

The powerful processor and large amount of RAM showed excellent performance when launching the application. The launch speed was measured with a conventional stopwatch.

Below is a summary graph for all tested computers with the average time for processing documents.

Check out the comparison charts:

Test results

Testing has shown that SSDthe disk gives an increase in operating speed. But for small database volumes, it can be replaced by a powerful processor with a larger amount of RAM than the database size.

The benefit of an SSD drive is noticeable only with large amounts of data, when there is not enough RAM to complete and correctly perform the operation.

The weakest result, as expected, showed a system unit based on the AMD A4-6300 processor without an SSD drive. The average wiring time exceeded 300 ms.

The most balanced in terms of price and results The result was a system unit based on a processor: AMD FX 4330 with a memory capacity of 4GB with an SSD drive.

With a price of 17,200 rubles, it is 11% more expensive than a system unit based on an AMD A4-6300 4GB processor with an SSD drive, and the increase in power is 29%. The benefit is more than double.

The AMD A4-6300 4GB system unit without an SSD drive, with its low price of RUR 12,500, will be sufficient for standard office tasks and small information databases with a small number of operations.

Best time when carrying out documents showed a system unit based on the Intel® Core™ i3-4170 processor. It is suitable if you use not only office programs and 1C, but also other applications, because the cost of an Intel® Core™ i3-4170 4 GB computer with SSD is RUB 25,500. 48% higher than AMD FX 4330 4GB with SSD and 64% higher than AMD A4-6300 4GB with SSD. The productivity increase in these cases is 21% and 44%, respectively.

What to choose?

Price category up to 16,000 rubles

Test copy No. 1

Processor: AMD FX 4330, (4 cores, 4 GHz, 95W), Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP 2 pcs., Hard drive: HDD Toshiba 500 GB HDWD105UZSVA P300

Processor: AMD FX 4330, (4 cores, 4 GHz, 95W), Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP 2 pcs., Hard drive: HDD Toshiba 500 GB HDWD105UZSVA P300, Silicon Power SATA-III 60Gb SP060GBSS3S60S25 S60 2.5" w490Mb/s

Processor: Intel® Core™ i3-4170 Processor3M Cache, 3.40 GHz, Memory DDR3 4Gb 1333MHz Kingston KVR13N9S8/4-SP, Hard disk (HDD): HDD Toshiba 500 GB HDWD105UZSVA P300